Hi Al,
On Friday 06 of September 2013 14:09:52 al.stone@xxxxxxxxxx wrote:
> From: Al Stone <ahs3@xxxxxxxxxx>
>
> Corrects an obvious typo in the Arndale pinctrl descriptions in DT.
> The samsung-pinctrl driver uses the correct name.
Thanks for spotting this. The patch looks good to me, but is it tested on
some Exynos 5250 based board?
With this typo activating configuration of these pinctrl groups just kept
pin-drv at default value, as set up by bootloader, while after this patch
it will be reconfigured with new values.
I'll try to test this patch on an Arndale later today.
Best regards,
Tomasz
> Signed-off-by: Al Stone <al.stone@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 44
> +++++++++++++++---------------- 1 file changed, 22 insertions(+), 22
> deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
> b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 656e381..031e198
> 100644
> --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
> @@ -210,21 +210,21 @@
> samsung,pins = "gpa0-2", "gpa0-3";
> samsung,pin-function = <2>;
> samsung,pin-pud = <0>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> i2c2_bus: i2c2-bus {
> samsung,pins = "gpa0-6", "gpa0-7";
> samsung,pin-function = <3>;
> samsung,pin-pud = <3>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> i2c2_hs_bus: i2c2-hs-bus {
> samsung,pins = "gpa0-6", "gpa0-7";
> samsung,pin-function = <4>;
> samsung,pin-pud = <3>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> uart2_data: uart2-data {
> @@ -238,21 +238,21 @@
> samsung,pins = "gpa1-2", "gpa1-3";
> samsung,pin-function = <2>;
> samsung,pin-pud = <0>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> i2c3_bus: i2c3-bus {
> samsung,pins = "gpa1-2", "gpa1-3";
> samsung,pin-function = <3>;
> samsung,pin-pud = <3>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> i2c3_hs_bus: i2c3-hs-bus {
> samsung,pins = "gpa1-2", "gpa1-3";
> samsung,pin-function = <4>;
> samsung,pin-pud = <3>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> uart3_data: uart3-data {
> @@ -273,14 +273,14 @@
> samsung,pins = "gpa2-0", "gpa2-1";
> samsung,pin-function = <3>;
> samsung,pin-pud = <3>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> i2c5_bus: i2c5-bus {
> samsung,pins = "gpa2-2", "gpa2-3";
> samsung,pin-function = <3>;
> samsung,pin-pud = <3>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> spi1_bus: spi1-bus {
> @@ -376,14 +376,14 @@
> samsung,pins = "gpb3-0", "gpb3-1";
> samsung,pin-function = <4>;
> samsung,pin-pud = <3>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> i2c1_hs_bus: i2c1-hs-bus {
> samsung,pins = "gpb3-2", "gpb3-3";
> samsung,pin-function = <4>;
> samsung,pin-pud = <3>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> sd0_clk: sd0-clk {
> @@ -551,14 +551,14 @@
> samsung,pins = "gpd0-2", "gpd0-3";
> samsung,pin-function = <2>;
> samsung,pin-pud = <0>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> dp_hpd: dp_hpd {
> samsung,pins = "gpx0-7";
> samsung,pin-function = <3>;
> samsung,pin-pud = <0>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
> };
>
> @@ -650,42 +650,42 @@
> "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
> samsung,pin-function = <3>;
> samsung,pin-pud = <0>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> cam_i2c2_bus: cam-i2c2-bus {
> samsung,pins = "gpe0-6", "gpe1-0";
> samsung,pin-function = <4>;
> samsung,pin-pud = <3>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> cam_spi1_bus: cam-spi1-bus {
> samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
> samsung,pin-function = <4>;
> samsung,pin-pud = <0>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> cam_i2c1_bus: cam-i2c1-bus {
> samsung,pins = "gpf0-2", "gpf0-3";
> samsung,pin-function = <2>;
> samsung,pin-pud = <3>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> cam_i2c0_bus: cam-i2c0-bus {
> samsung,pins = "gpf0-0", "gpf0-1";
> samsung,pin-function = <2>;
> samsung,pin-pud = <3>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> cam_spi0_bus: cam-spi0-bus {
> samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
> samsung,pin-function = <2>;
> samsung,pin-pud = <0>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> cam_bayrgb_bus: cam-bayrgb-bus {
> @@ -696,7 +696,7 @@
> "gpg2-0", "gpg2-1";
> samsung,pin-function = <2>;
> samsung,pin-pud = <0>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> cam_port_a: cam-port-a {
> @@ -705,7 +705,7 @@
> "gph1-4", "gph1-5", "gph1-6", "gph1-7";
> samsung,pin-function = <2>;
> samsung,pin-pud = <0>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
> };
>
> @@ -757,7 +757,7 @@
> "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
> samsung,pin-function = <2>;
> samsung,pin-pud = <0>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
>
> c2c_txd: c2c-txd {
> @@ -767,7 +767,7 @@
> "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
> samsung,pin-function = <2>;
> samsung,pin-pud = <0>;
> - samaung,pin-drv = <0>;
> + samsung,pin-drv = <0>;
> };
> };
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
