Hi Vikas,
On 5 September 2013 16:09, Vikas Sajjan <sajjan.linux@xxxxxxxxx> wrote:
> Hi Chander,
>
> On Thu, Sep 5, 2013 at 3:52 PM, Chander Kashyap
> <chander.kashyap@xxxxxxxxxx> wrote:
>> Exynos5420 is octacore SoC from samsung.
>> Hence populate all the cpu node enteries.
>>
>> Signed-off-by: Chander Kashyap <chander.kashyap@xxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/exynos5420.dtsi | 28 ++++++++++++++++++++++++++++
>> 1 file changed, 28 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
>> index e97c87b..0bd1a40 100644
>> --- a/arch/arm/boot/dts/exynos5420.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420.dtsi
>> @@ -57,6 +57,34 @@
>> reg = <0x3>;
>> clock-frequency = <1800000000>;
>> };
>> +
>> + cpu4: cpu@0x100 {
>
>
> you are NOT suppose to use '0x' in dt node name.
> it should be cpu4: cpu@100 {
Ok, I will fix it.
>
>
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x100>;
>> + clock-frequency = <1000000000>;
>> + };
>> +
>> + cpu5: cpu@0x101 {
>
> ditto.
>
>
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x101>;
>> + clock-frequency = <1000000000>;
>> + };
>> +
>> + cpu6: cpu@0x102 {
>
> ditto.
>
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x102>;
>> + clock-frequency = <1000000000>;
>> + };
>> +
>> + cpu7: cpu@0x103 {
>
> ditto.
>
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x103>;
>> + clock-frequency = <1000000000>;
>> + };
>> };
>>
>> clock: clock-controller@0x10010000 {
>> --
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
with warm regards,
Chander Kashyap
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
