This includes defining the mapping for the request sources.
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
changes since v1:
- follow new pdata definition
arch/arm/mach-s3c24xx/common.c | 106 +++++++++++++++++++++++++++++++++
arch/arm/mach-s3c24xx/common.h | 3 +
arch/arm/mach-s3c24xx/mach-jive.c | 1 +
arch/arm/mach-s3c24xx/mach-smdk2413.c | 1 +
arch/arm/mach-s3c24xx/mach-smdk2416.c | 1 +
arch/arm/mach-s3c24xx/mach-smdk2443.c | 1 +
arch/arm/mach-s3c24xx/mach-vstms.c | 1 +
7 files changed, 114 insertions(+)
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 457261c..16ac669 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/platform_data/dma-s3c24xx.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
@@ -44,6 +45,7 @@
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
+#include <mach/dma.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@@ -329,3 +331,107 @@ void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
clk_p.rate = pclk;
clk_f.rate = fclk;
}
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+ defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dma_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+ [1] = DEFINE_RES_IRQ(IRQ_DMA0),
+ [2] = DEFINE_RES_IRQ(IRQ_DMA1),
+ [3] = DEFINE_RES_IRQ(IRQ_DMA2),
+ [4] = DEFINE_RES_IRQ(IRQ_DMA3),
+};
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
+ [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+ [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+ [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+ [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+ [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+ [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+ [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+ [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+ [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+ [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+ [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+ [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+ [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+ [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+ [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+ [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+ [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
+ [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
+ [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
+ [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
+};
+
+static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
+ .num_phy_channels = 4,
+ .channels = s3c2412_dma_channels,
+ .num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2412_device_dma = {
+ .name = "s3c2412-dma",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c2410_dma_resource),
+ .resource = s3c2410_dma_resource,
+ .dev = {
+ .platform_data = &s3c2412_dma_platdata,
+ },
+};
+#endif
+
+#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416)
+static struct resource s3c2443_dma_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+ [1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
+ [2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
+ [3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
+ [4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
+ [5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
+ [6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
+};
+
+static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
+ [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+ [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+ [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+ [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+ [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+ [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+ [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+ [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+ [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+ [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+ [DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
+ [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+ [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+ [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+ [DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
+ [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+ [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+ [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+ [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
+ [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
+ [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
+};
+
+static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
+ .num_phy_channels = 6,
+ .channels = s3c2443_dma_channels,
+ .num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2443_device_dma = {
+ .name = "s3c2443-dma",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c2443_dma_resource),
+ .resource = s3c2443_dma_resource,
+ .dev = {
+ .platform_data = &s3c2443_dma_platdata,
+ },
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 84b2806..fe07189 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -109,4 +109,7 @@ extern void s3c2443_init_irq(void);
extern struct syscore_ops s3c24xx_irq_syscore_ops;
+extern struct platform_device s3c2412_device_dma;
+extern struct platform_device s3c2443_device_dma;
+
#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index a45fcd8..43c23e2 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -466,6 +466,7 @@ static struct platform_device *jive_devices[] __initdata = {
&jive_device_wm8750,
&s3c_device_nand,
&s3c_device_usbgadget,
+ &s3c2412_device_dma,
};
static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index 8146e92..c9d31ef 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -89,6 +89,7 @@ static struct platform_device *smdk2413_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usbgadget,
+ &s3c2412_device_dma,
};
static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index cb46847..f88e672 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -215,6 +215,7 @@ static struct platform_device *smdk2416_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_usb_hsudc,
+ &s3c2443_device_dma,
};
static void __init smdk2416_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 9435c3b..d9933fc 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -115,6 +115,7 @@ static struct platform_device *smdk2443_devices[] __initdata = {
#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
&s3c_device_ac97,
#endif
+ &s3c2443_device_dma,
};
static void __init smdk2443_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index b665884..f7ec9c5 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -126,6 +126,7 @@ static struct platform_device *vstms_devices[] __initdata = {
&s3c_device_iis,
&s3c_device_rtc,
&s3c_device_nand,
+ &s3c2412_device_dma,
};
static void __init vstms_fixup(struct tag *tags, char **cmdline,
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
