Re: [PATCH 1/7] drm/exynos: move hdmiphy related code to hdmiphy driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 4, 2013 at 1:47 AM, Rahul Sharma <r.sh.open@xxxxxxxxx> wrote:
> Thanks Sean,
>
> On 3 September 2013 20:15, Sean Paul <seanpaul@xxxxxxxxxxxx> wrote:
>> A few comments.
>>
>> On Fri, Aug 30, 2013 at 2:59 AM, Rahul Sharma <rahul.sharma@xxxxxxxxxxx> wrote:
>>> Exynos hdmiphy operations and configs are kept inside
>>> the hdmi driver. Hdmiphy related code is tightly coupled
>>> with hdmi IP driver.
>>>
>>> This patche moves hdmiphy related code to hdmiphy driver.
>>
>> s/patche/patch
>>
> ok.
>>> It will help in cleanly supporting the hdmiphy variations
>>> in further SoCs.
>>>
>>> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
>>> ---
>>>  .../devicetree/bindings/video/exynos_hdmi.txt      |    2 +
>>>  drivers/gpu/drm/exynos/exynos_drm_hdmi.h           |   11 +
>>>  drivers/gpu/drm/exynos/exynos_hdmi.c               |  343 +++------------
>>>  drivers/gpu/drm/exynos/exynos_hdmiphy.c            |  438 +++++++++++++++++++-
>>>  drivers/gpu/drm/exynos/regs-hdmiphy.h              |   35 ++
>>>  5 files changed, 533 insertions(+), 296 deletions(-)
>>>  create mode 100644 drivers/gpu/drm/exynos/regs-hdmiphy.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
>>> index 50decf8..240eca5 100644
>>> --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
>>> +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
>>> @@ -25,6 +25,7 @@ Required properties:
>>>                 sclk_pixel.
>>>  - clock-names: aliases as per driver requirements for above clock IDs:
>>>         "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
>>> +- phy: it points to hdmiphy dt node.
>>>  Example:
>>>
>>>         hdmi {
>>> @@ -32,4 +33,5 @@ Example:
>>>                 reg = <0x14530000 0x100000>;
>>>                 interrupts = <0 95 0>;
>>>                 hpd-gpio = <&gpx3 7 1>;
>>> +               phy = <&hdmiphy>;
>>>         };
>>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.h b/drivers/gpu/drm/exynos/exynos_drm_hdmi.h
>>> index 724cab1..1c839f8 100644
>>> --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.h
>>> +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.h
>>> @@ -64,4 +64,15 @@ void exynos_hdmi_drv_attach(struct exynos_drm_hdmi_context *ctx);
>>>  void exynos_mixer_drv_attach(struct exynos_drm_hdmi_context *ctx);
>>>  void exynos_hdmi_ops_register(struct exynos_hdmi_ops *ops);
>>>  void exynos_mixer_ops_register(struct exynos_mixer_ops *ops);
>>> +
>>> +int exynos_hdmiphy_driver_register(void);
>>> +void exynos_hdmiphy_driver_unregister(void);
>>> +
>>> +void exynos_hdmiphy_enable(struct device *dev);
>>> +void exynos_hdmiphy_disable(struct device *dev);
>>> +int exynos_hdmiphy_check_mode(struct device *dev,
>>> +                               struct drm_display_mode *mode);
>>> +int exynos_hdmiphy_set_mode(struct device *dev,
>>> +                               struct drm_display_mode *mode);
>>> +int exynos_hdmiphy_conf_apply(struct device *dev);
>>>  #endif
>>> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> index f67ffca..3af4e4c 100644
>>> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> @@ -34,6 +34,8 @@
>>>  #include <linux/io.h>
>>>  #include <linux/of.h>
>>>  #include <linux/of_gpio.h>
>>> +#include <linux/of_i2c.h>
>>> +#include <linux/of_platform.h>
>>>
>>>  #include <drm/exynos_drm.h>
>>>
>>> @@ -172,7 +174,6 @@ struct hdmi_v14_conf {
>>>  };
>>>
>>>  struct hdmi_conf_regs {
>>> -       int pixel_clock;
>>>         int cea_video_id;
>>>         union {
>>>                 struct hdmi_v13_conf v13_conf;
>>> @@ -193,9 +194,9 @@ struct hdmi_context {
>>>         int                             irq;
>>>
>>>         struct i2c_client               *ddc_port;
>>> -       struct i2c_client               *hdmiphy_port;
>>> +       struct device                   *hdmiphy_dev;
>>>
>>> -       /* current hdmiphy conf regs */
>>> +       /* current hdmi ip configuration registers. */
>>>         struct hdmi_conf_regs           mode_conf;
>>>
>>>         struct hdmi_resources           res;
>>> @@ -205,180 +206,6 @@ struct hdmi_context {
>>>         enum hdmi_type                  type;
>>>  };
>>>
>>> -struct hdmiphy_config {
>>> -       int pixel_clock;
>>> -       u8 conf[32];
>>> -};
>>> -
>>> -/* list of phy config settings */
>>> -static const struct hdmiphy_config hdmiphy_v13_configs[] = {
>>> -       {
>>> -               .pixel_clock = 27000000,
>>> -               .conf = {
>>> -                       0x01, 0x05, 0x00, 0xD8, 0x10, 0x1C, 0x30, 0x40,
>>> -                       0x6B, 0x10, 0x02, 0x51, 0xDF, 0xF2, 0x54, 0x87,
>>> -                       0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0,
>>> -                       0x22, 0x40, 0xE3, 0x26, 0x00, 0x00, 0x00, 0x00,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 27027000,
>>> -               .conf = {
>>> -                       0x01, 0x05, 0x00, 0xD4, 0x10, 0x9C, 0x09, 0x64,
>>> -                       0x6B, 0x10, 0x02, 0x51, 0xDF, 0xF2, 0x54, 0x87,
>>> -                       0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0,
>>> -                       0x22, 0x40, 0xE3, 0x26, 0x00, 0x00, 0x00, 0x00,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 74176000,
>>> -               .conf = {
>>> -                       0x01, 0x05, 0x00, 0xD8, 0x10, 0x9C, 0xef, 0x5B,
>>> -                       0x6D, 0x10, 0x01, 0x51, 0xef, 0xF3, 0x54, 0xb9,
>>> -                       0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0,
>>> -                       0x22, 0x40, 0xa5, 0x26, 0x01, 0x00, 0x00, 0x00,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 74250000,
>>> -               .conf = {
>>> -                       0x01, 0x05, 0x00, 0xd8, 0x10, 0x9c, 0xf8, 0x40,
>>> -                       0x6a, 0x10, 0x01, 0x51, 0xff, 0xf1, 0x54, 0xba,
>>> -                       0x84, 0x00, 0x10, 0x38, 0x00, 0x08, 0x10, 0xe0,
>>> -                       0x22, 0x40, 0xa4, 0x26, 0x01, 0x00, 0x00, 0x00,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 148500000,
>>> -               .conf = {
>>> -                       0x01, 0x05, 0x00, 0xD8, 0x10, 0x9C, 0xf8, 0x40,
>>> -                       0x6A, 0x18, 0x00, 0x51, 0xff, 0xF1, 0x54, 0xba,
>>> -                       0x84, 0x00, 0x10, 0x38, 0x00, 0x08, 0x10, 0xE0,
>>> -                       0x22, 0x40, 0xa4, 0x26, 0x02, 0x00, 0x00, 0x00,
>>> -               },
>>> -       },
>>> -};
>>> -
>>> -static const struct hdmiphy_config hdmiphy_v14_configs[] = {
>>> -       {
>>> -               .pixel_clock = 25200000,
>>> -               .conf = {
>>> -                       0x01, 0x51, 0x2A, 0x75, 0x40, 0x01, 0x00, 0x08,
>>> -                       0x82, 0x80, 0xfc, 0xd8, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0xf4, 0x24, 0x00, 0x00, 0x00, 0x01, 0x80,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 27000000,
>>> -               .conf = {
>>> -                       0x01, 0xd1, 0x22, 0x51, 0x40, 0x08, 0xfc, 0x20,
>>> -                       0x98, 0xa0, 0xcb, 0xd8, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x06, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0xe4, 0x24, 0x00, 0x00, 0x00, 0x01, 0x80,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 27027000,
>>> -               .conf = {
>>> -                       0x01, 0xd1, 0x2d, 0x72, 0x40, 0x64, 0x12, 0x08,
>>> -                       0x43, 0xa0, 0x0e, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0xe3, 0x24, 0x00, 0x00, 0x00, 0x01, 0x00,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 36000000,
>>> -               .conf = {
>>> -                       0x01, 0x51, 0x2d, 0x55, 0x40, 0x01, 0x00, 0x08,
>>> -                       0x82, 0x80, 0x0e, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0xab, 0x24, 0x00, 0x00, 0x00, 0x01, 0x80,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 40000000,
>>> -               .conf = {
>>> -                       0x01, 0x51, 0x32, 0x55, 0x40, 0x01, 0x00, 0x08,
>>> -                       0x82, 0x80, 0x2c, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0x9a, 0x24, 0x00, 0x00, 0x00, 0x01, 0x80,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 65000000,
>>> -               .conf = {
>>> -                       0x01, 0xd1, 0x36, 0x34, 0x40, 0x1e, 0x0a, 0x08,
>>> -                       0x82, 0xa0, 0x45, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0xbd, 0x24, 0x01, 0x00, 0x00, 0x01, 0x80,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 74176000,
>>> -               .conf = {
>>> -                       0x01, 0xd1, 0x3e, 0x35, 0x40, 0x5b, 0xde, 0x08,
>>> -                       0x82, 0xa0, 0x73, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x56, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0xa6, 0x24, 0x01, 0x00, 0x00, 0x01, 0x80,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 74250000,
>>> -               .conf = {
>>> -                       0x01, 0xd1, 0x1f, 0x10, 0x40, 0x40, 0xf8, 0x08,
>>> -                       0x81, 0xa0, 0xba, 0xd8, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x3c, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0xa5, 0x24, 0x01, 0x00, 0x00, 0x01, 0x00,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 83500000,
>>> -               .conf = {
>>> -                       0x01, 0xd1, 0x23, 0x11, 0x40, 0x0c, 0xfb, 0x08,
>>> -                       0x85, 0xa0, 0xd1, 0xd8, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0x93, 0x24, 0x01, 0x00, 0x00, 0x01, 0x80,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 106500000,
>>> -               .conf = {
>>> -                       0x01, 0xd1, 0x2c, 0x12, 0x40, 0x0c, 0x09, 0x08,
>>> -                       0x84, 0xa0, 0x0a, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0x73, 0x24, 0x01, 0x00, 0x00, 0x01, 0x80,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 108000000,
>>> -               .conf = {
>>> -                       0x01, 0x51, 0x2d, 0x15, 0x40, 0x01, 0x00, 0x08,
>>> -                       0x82, 0x80, 0x0e, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0xc7, 0x25, 0x03, 0x00, 0x00, 0x01, 0x80,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 146250000,
>>> -               .conf = {
>>> -                       0x01, 0xd1, 0x3d, 0x15, 0x40, 0x18, 0xfd, 0x08,
>>> -                       0x83, 0xa0, 0x6e, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0x50, 0x25, 0x03, 0x00, 0x00, 0x01, 0x80,
>>> -               },
>>> -       },
>>> -       {
>>> -               .pixel_clock = 148500000,
>>> -               .conf = {
>>> -                       0x01, 0xd1, 0x1f, 0x00, 0x40, 0x40, 0xf8, 0x08,
>>> -                       0x81, 0xa0, 0xba, 0xd8, 0x45, 0xa0, 0xac, 0x80,
>>> -                       0x3c, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> -                       0x54, 0x4b, 0x25, 0x03, 0x00, 0x00, 0x01, 0x00,
>>> -               },
>>> -       },
>>> -};
>>> -
>>>  struct hdmi_infoframe {
>>>         enum HDMI_PACKET_TYPE type;
>>>         u8 ver;
>>> @@ -769,28 +596,6 @@ static struct edid *hdmi_get_edid(void *ctx, struct drm_connector *connector)
>>>         return raw_edid;
>>>  }
>>>
>>> -static int hdmi_find_phy_conf(struct hdmi_context *hdata, u32 pixel_clock)
>>> -{
>>> -       const struct hdmiphy_config *confs;
>>> -       int count, i;
>>> -
>>> -       if (hdata->type == HDMI_TYPE13) {
>>> -               confs = hdmiphy_v13_configs;
>>> -               count = ARRAY_SIZE(hdmiphy_v13_configs);
>>> -       } else if (hdata->type == HDMI_TYPE14) {
>>> -               confs = hdmiphy_v14_configs;
>>> -               count = ARRAY_SIZE(hdmiphy_v14_configs);
>>> -       } else
>>> -               return -EINVAL;
>>> -
>>> -       for (i = 0; i < count; i++)
>>> -               if (confs[i].pixel_clock == pixel_clock)
>>> -                       return i;
>>> -
>>> -       DRM_DEBUG_KMS("Could not find phy config for %d\n", pixel_clock);
>>> -       return -EINVAL;
>>> -}
>>> -
>>>  static int hdmi_check_mode(void *ctx, struct drm_display_mode *mode)
>>>  {
>>>         struct hdmi_context *hdata = ctx;
>>> @@ -801,7 +606,7 @@ static int hdmi_check_mode(void *ctx, struct drm_display_mode *mode)
>>>                 (mode->flags & DRM_MODE_FLAG_INTERLACE) ? true :
>>>                 false, mode->clock * 1000);
>>>
>>> -       ret = hdmi_find_phy_conf(hdata, mode->clock * 1000);
>>> +       ret = exynos_hdmiphy_check_mode(hdata->hdmiphy_dev, mode);
>>>         if (ret < 0)
>>>                 return ret;
>>>         return 0;
>>> @@ -1302,19 +1107,13 @@ static void hdmi_mode_apply(struct hdmi_context *hdata)
>>>
>>>  static void hdmiphy_conf_reset(struct hdmi_context *hdata)
>>>  {
>>> -       u8 buffer[2];
>>>         u32 reg;
>>>
>>>         clk_disable_unprepare(hdata->res.sclk_hdmi);
>>>         clk_set_parent(hdata->res.mout_hdmi, hdata->res.sclk_pixel);
>>>         clk_prepare_enable(hdata->res.sclk_hdmi);
>>>
>>> -       /* operation mode */
>>> -       buffer[0] = 0x1f;
>>> -       buffer[1] = 0x00;
>>> -
>>> -       if (hdata->hdmiphy_port)
>>> -               i2c_master_send(hdata->hdmiphy_port, buffer, 2);
>>> +       exynos_hdmiphy_disable(hdata->hdmiphy_dev);
>>>
>>>         if (hdata->type == HDMI_TYPE13)
>>>                 reg = HDMI_V13_PHY_RSTOUT;
>>> @@ -1342,66 +1141,12 @@ static void hdmiphy_poweroff(struct hdmi_context *hdata)
>>>                         HDMI_PHY_POWER_OFF_EN);
>>>  }
>>>
>>> -static void hdmiphy_conf_apply(struct hdmi_context *hdata)
>>> -{
>>> -       const u8 *hdmiphy_data;
>>> -       u8 buffer[32];
>>> -       u8 operation[2];
>>> -       u8 read_buffer[32] = {0, };
>>> -       int ret;
>>> -       int i;
>>> -
>>> -       if (!hdata->hdmiphy_port) {
>>> -               DRM_ERROR("hdmiphy is not attached\n");
>>> -               return;
>>> -       }
>>> -
>>> -       /* pixel clock */
>>> -       i = hdmi_find_phy_conf(hdata, hdata->mode_conf.pixel_clock);
>>> -       if (i < 0) {
>>> -               DRM_ERROR("failed to find hdmiphy conf\n");
>>> -               return;
>>> -       }
>>> -
>>> -       if (hdata->type == HDMI_TYPE13)
>>> -               hdmiphy_data = hdmiphy_v13_configs[i].conf;
>>> -       else
>>> -               hdmiphy_data = hdmiphy_v14_configs[i].conf;
>>> -
>>> -       memcpy(buffer, hdmiphy_data, 32);
>>> -       ret = i2c_master_send(hdata->hdmiphy_port, buffer, 32);
>>> -       if (ret != 32) {
>>> -               DRM_ERROR("failed to configure HDMIPHY via I2C\n");
>>> -               return;
>>> -       }
>>> -
>>> -       usleep_range(10000, 12000);
>>> -
>>> -       /* operation mode */
>>> -       operation[0] = 0x1f;
>>> -       operation[1] = 0x80;
>>> -
>>> -       ret = i2c_master_send(hdata->hdmiphy_port, operation, 2);
>>> -       if (ret != 2) {
>>> -               DRM_ERROR("failed to enable hdmiphy\n");
>>> -               return;
>>> -       }
>>> -
>>> -       ret = i2c_master_recv(hdata->hdmiphy_port, read_buffer, 32);
>>> -       if (ret < 0) {
>>> -               DRM_ERROR("failed to read hdmiphy config\n");
>>> -               return;
>>> -       }
>>> -
>>> -       for (i = 0; i < ret; i++)
>>> -               DRM_DEBUG_KMS("hdmiphy[0x%02x] write[0x%02x] - "
>>> -                       "recv [0x%02x]\n", i, buffer[i], read_buffer[i]);
>>> -}
>>> -
>>>  static void hdmi_conf_apply(struct hdmi_context *hdata)
>>>  {
>>>         hdmiphy_conf_reset(hdata);
>>> -       hdmiphy_conf_apply(hdata);
>>> +       exynos_hdmiphy_conf_apply(hdata->hdmiphy_dev);
>>> +       usleep_range(10000, 12000);
>>
>> This delay seems like something that should be in the phy driver,
>> instead of the hdmi driver (since it seems conceivable that certain
>> phys might not need a delay or might need a longer delay).
>>
>
> ok. I will move it there.
>
>>> +       exynos_hdmiphy_enable(hdata->hdmiphy_dev);
>>>
>>>         mutex_lock(&hdata->hdmi_mutex);
>>>         hdmi_conf_reset(hdata);
>>> @@ -1434,7 +1179,6 @@ static void hdmi_v13_mode_set(struct hdmi_context *hdata,
>>>
>>>         hdata->mode_conf.cea_video_id =
>>>                 drm_match_cea_mode((struct drm_display_mode *)m);
>>> -       hdata->mode_conf.pixel_clock = m->clock * 1000;
>>>
>>>         hdmi_set_reg(core->h_blank, 2, m->htotal - m->hdisplay);
>>>         hdmi_set_reg(core->h_v_line, 3, (m->htotal << 12) | m->vtotal);
>>> @@ -1530,7 +1274,6 @@ static void hdmi_v14_mode_set(struct hdmi_context *hdata,
>>>
>>>         hdata->mode_conf.cea_video_id =
>>>                 drm_match_cea_mode((struct drm_display_mode *)m);
>>> -       hdata->mode_conf.pixel_clock = m->clock * 1000;
>>>
>>>         hdmi_set_reg(core->h_blank, 2, m->htotal - m->hdisplay);
>>>         hdmi_set_reg(core->v_line, 2, m->vtotal);
>>> @@ -1646,6 +1389,8 @@ static void hdmi_mode_set(void *ctx, struct drm_display_mode *mode)
>>>                 hdmi_v13_mode_set(hdata, mode);
>>>         else
>>>                 hdmi_v14_mode_set(hdata, mode);
>>> +
>>> +       exynos_hdmiphy_set_mode(hdata->hdmiphy_dev, mode);
>>
>> Why set_mode when everything else is mode_set?
>>
>
> I will change it to mode_set.
>
>>>  }
>>>
>>>  static void hdmi_get_max_resol(void *ctx, unsigned int *width,
>>> @@ -1824,7 +1569,7 @@ fail:
>>>         return -ENODEV;
>>>  }
>>>
>>> -static struct i2c_client *hdmi_ddc, *hdmi_hdmiphy;
>>> +static struct i2c_client *hdmi_ddc;
>>>
>>>  void hdmi_attach_ddc_client(struct i2c_client *ddc)
>>>  {
>>> @@ -1832,12 +1577,6 @@ void hdmi_attach_ddc_client(struct i2c_client *ddc)
>>>                 hdmi_ddc = ddc;
>>>  }
>>>
>>> -void hdmi_attach_hdmiphy_client(struct i2c_client *hdmiphy)
>>> -{
>>> -       if (hdmiphy)
>>> -               hdmi_hdmiphy = hdmiphy;
>>> -}
>>> -
>>>  static struct s5p_hdmi_platform_data *drm_hdmi_dt_parse_pdata
>>>                                         (struct device *dev)
>>>  {
>>> @@ -1862,6 +1601,50 @@ err_data:
>>>         return NULL;
>>>  }
>>>
>>> +static int hdmi_get_phy_device(struct hdmi_context *hdata)
>>
>> "get" is not the proper verb here, "initialize" would be more
>> appropriate (IMO, of course).
>>
>
> But we don't initialise the phy here. It is just to get the
> hdmiphy dev* through dt.
>

OK, sure. Maybe hdmi_register_phy_device then, since you're doing more
than just getting it from dt.

>>> +{
>>> +       struct device_node *np;
>>> +       struct i2c_client *client;
>>> +       struct platform_device *pdev;
>>> +       int ret;
>>> +
>>> +       /* register hdmiphy driver */
>>> +       ret = exynos_hdmiphy_driver_register();
>>> +       if (ret) {
>>> +               DRM_ERROR("failed to register hdmiphy driver\n");
>>
>> Printing ret would be useful here.
>
> ok.
>>
>>> +               goto err;
>>> +       }
>>> +
>>> +       np = of_parse_phandle(hdata->dev->of_node, "phy", 0);
>>> +       if (!np) {
>>> +               DRM_ERROR("Could not find 'phy' property\n");
>>> +               ret = -ENOENT;
>>> +               goto err;
>>> +       }
>>> +
>>> +       /* find hdmi phy on i2c bus */
>>> +       client = of_find_i2c_device_by_node(np);
>>> +       if (client) {
>>> +               hdata->hdmiphy_dev = &client->dev;
>>> +               ret = 0;
>>> +               goto exit;
>>> +       }
>>> +
>>> +       /* find hdmi phy on platform bus */
>>> +       pdev = of_find_device_by_node(np);
>>> +       if (pdev) {
>>> +               hdata->hdmiphy_dev = &pdev->dev;
>>> +               ret = 0;
>>> +               goto exit;
>>> +       }
>>> +
>>> +exit:
>>> +       /* able to find hdmiphy on platform/i2c bus */
>>> +err:
>>
>> Probably just easier to have one "exit" or "out" label that just returns ret.
>
> ok.
>>
>>> +       of_node_put(np);
>>> +       return ret;
>>> +}
>>> +
>>>  static struct of_device_id hdmi_match_types[] = {
>>>         {
>>>                 .compatible = "samsung,exynos5-hdmi",
>>> @@ -1939,15 +1722,13 @@ static int hdmi_probe(struct platform_device *pdev)
>>>
>>>         hdata->ddc_port = hdmi_ddc;
>>>
>>> -       /* hdmiphy i2c driver */
>>> -       if (i2c_add_driver(&hdmiphy_driver)) {
>>> -               DRM_ERROR("failed to register hdmiphy i2c driver\n");
>>> +       ret = hdmi_get_phy_device(hdata);
>>> +       if (ret) {
>>> +               DRM_ERROR("failed to get hdmiphy device\n");
>>
>> Printing ret would be useful.
>>
>>
>>>                 ret = -ENOENT;
>>
>> Why change the return value here?
>>
> Yea. Correct. I shouldn't. I will change this.
>
>>>                 goto err_ddc;
>>>         }
>>>
>>> -       hdata->hdmiphy_port = hdmi_hdmiphy;
>>> -
>>>         hdata->irq = gpio_to_irq(hdata->hpd_gpio);
>>>         if (hdata->irq < 0) {
>>>                 DRM_ERROR("failed to get GPIO irq\n");
>>> @@ -1977,7 +1758,7 @@ static int hdmi_probe(struct platform_device *pdev)
>>>         return 0;
>>>
>>>  err_hdmiphy:
>>> -       i2c_del_driver(&hdmiphy_driver);
>>> +       exynos_hdmiphy_driver_unregister();
>>>  err_ddc:
>>>         i2c_del_driver(&ddc_driver);
>>>         return ret;
>>> @@ -1989,8 +1770,8 @@ static int hdmi_remove(struct platform_device *pdev)
>>>
>>>         pm_runtime_disable(dev);
>>>
>>> -       /* hdmiphy i2c driver */
>>> -       i2c_del_driver(&hdmiphy_driver);
>>> +       /* hdmiphy driver */
>>> +       exynos_hdmiphy_driver_unregister();
>>>         /* DDC i2c driver */
>>>         i2c_del_driver(&ddc_driver);
>>>
>>> diff --git a/drivers/gpu/drm/exynos/exynos_hdmiphy.c b/drivers/gpu/drm/exynos/exynos_hdmiphy.c
>>> index 59abb14..82daa42 100644
>>> --- a/drivers/gpu/drm/exynos/exynos_hdmiphy.c
>>> +++ b/drivers/gpu/drm/exynos/exynos_hdmiphy.c
>>> @@ -15,51 +15,459 @@
>>>
>>>  #include <linux/kernel.h>
>>>  #include <linux/i2c.h>
>>> -#include <linux/of.h>
>>> +#include <linux/module.h>
>>> +#include <linux/pm_runtime.h>
>>> +#include <linux/clk.h>
>>>
>>>  #include "exynos_drm_drv.h"
>>>  #include "exynos_hdmi.h"
>>> +#include "exynos_drm_hdmi.h"
>>> +#include "regs-hdmiphy.h"
>>>
>>> +#define HDMIPHY_REG_COUNT      (32)
>>
>> This probably belongs in regs-hdmiphy.h instead of here. Also remove the ()
>>
>
> Ok. I will move it there.
>
>>>
>>> -static int hdmiphy_probe(struct i2c_client *client,
>>> -       const struct i2c_device_id *id)
>>> +struct hdmiphy_context {
>>> +       struct device           *dev;
>>> +       struct hdmiphy_config   *current_conf;
>>> +
>>> +       struct hdmiphy_config   *confs;
>>> +       unsigned int            nr_confs;
>>> +};
>>> +
>>> +struct hdmiphy_config {
>>> +       int pixel_clock;
>>> +       u8 conf[HDMIPHY_REG_COUNT];
>>> +};
>>> +
>>> +struct hdmiphy_drv_data {
>>> +       struct hdmiphy_config *confs;
>>> +       unsigned int count;
>>> +};
>>> +
>>> +/* list of all required phy config settings */
>>> +static struct hdmiphy_config hdmiphy_4212_configs[] = {
>>> +       {
>>> +               .pixel_clock = 25200000,
>>> +               .conf = {
>>> +                       0x01, 0x51, 0x2A, 0x75, 0x40, 0x01, 0x00, 0x08,
>>> +                       0x82, 0x80, 0xfc, 0xd8, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0xf4, 0x24, 0x00, 0x00, 0x00, 0x01, 0x80,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 27000000,
>>> +               .conf = {
>>> +                       0x01, 0xd1, 0x22, 0x51, 0x40, 0x08, 0xfc, 0x20,
>>> +                       0x98, 0xa0, 0xcb, 0xd8, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x06, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0xe4, 0x24, 0x00, 0x00, 0x00, 0x01, 0x80,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 27027000,
>>> +               .conf = {
>>> +                       0x01, 0xd1, 0x2d, 0x72, 0x40, 0x64, 0x12, 0x08,
>>> +                       0x43, 0xa0, 0x0e, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0xe3, 0x24, 0x00, 0x00, 0x00, 0x01, 0x00,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 36000000,
>>> +               .conf = {
>>> +                       0x01, 0x51, 0x2d, 0x55, 0x40, 0x01, 0x00, 0x08,
>>> +                       0x82, 0x80, 0x0e, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0xab, 0x24, 0x00, 0x00, 0x00, 0x01, 0x80,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 40000000,
>>> +               .conf = {
>>> +                       0x01, 0x51, 0x32, 0x55, 0x40, 0x01, 0x00, 0x08,
>>> +                       0x82, 0x80, 0x2c, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0x9a, 0x24, 0x00, 0x00, 0x00, 0x01, 0x80,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 65000000,
>>> +               .conf = {
>>> +                       0x01, 0xd1, 0x36, 0x34, 0x40, 0x1e, 0x0a, 0x08,
>>> +                       0x82, 0xa0, 0x45, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0xbd, 0x24, 0x01, 0x00, 0x00, 0x01, 0x80,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 74176000,
>>> +               .conf = {
>>> +                       0x01, 0xd1, 0x3e, 0x35, 0x40, 0x5b, 0xde, 0x08,
>>> +                       0x82, 0xa0, 0x73, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x56, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0xa6, 0x24, 0x01, 0x00, 0x00, 0x01, 0x80,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 74250000,
>>> +               .conf = {
>>> +                       0x01, 0xd1, 0x1f, 0x10, 0x40, 0x40, 0xf8, 0x08,
>>> +                       0x81, 0xa0, 0xba, 0xd8, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x3c, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0xa5, 0x24, 0x01, 0x00, 0x00, 0x01, 0x00,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 83500000,
>>> +               .conf = {
>>> +                       0x01, 0xd1, 0x23, 0x11, 0x40, 0x0c, 0xfb, 0x08,
>>> +                       0x85, 0xa0, 0xd1, 0xd8, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0x93, 0x24, 0x01, 0x00, 0x00, 0x01, 0x80,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 106500000,
>>> +               .conf = {
>>> +                       0x01, 0xd1, 0x2c, 0x12, 0x40, 0x0c, 0x09, 0x08,
>>> +                       0x84, 0xa0, 0x0a, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0x73, 0x24, 0x01, 0x00, 0x00, 0x01, 0x80,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 108000000,
>>> +               .conf = {
>>> +                       0x01, 0x51, 0x2d, 0x15, 0x40, 0x01, 0x00, 0x08,
>>> +                       0x82, 0x80, 0x0e, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0xc7, 0x25, 0x03, 0x00, 0x00, 0x01, 0x80,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 146250000,
>>> +               .conf = {
>>> +                       0x01, 0xd1, 0x3d, 0x15, 0x40, 0x18, 0xfd, 0x08,
>>> +                       0x83, 0xa0, 0x6e, 0xd9, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x08, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0x50, 0x25, 0x03, 0x00, 0x00, 0x01, 0x80,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 148500000,
>>> +               .conf = {
>>> +                       0x01, 0xd1, 0x1f, 0x00, 0x40, 0x40, 0xf8, 0x08,
>>> +                       0x81, 0xa0, 0xba, 0xd8, 0x45, 0xa0, 0xac, 0x80,
>>> +                       0x3c, 0x80, 0x11, 0x04, 0x02, 0x22, 0x44, 0x86,
>>> +                       0x54, 0x4b, 0x25, 0x03, 0x00, 0x00, 0x01, 0x00,
>>> +               },
>>> +       },
>>> +};
>>> +
>>> +static struct hdmiphy_config hdmiphy_4210_configs[] = {
>>> +       {
>>> +               .pixel_clock = 27000000,
>>> +               .conf = {
>>> +                       0x01, 0x05, 0x00, 0xD8, 0x10, 0x1C, 0x30, 0x40,
>>> +                       0x6B, 0x10, 0x02, 0x51, 0xDF, 0xF2, 0x54, 0x87,
>>> +                       0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0,
>>> +                       0x22, 0x40, 0xE3, 0x26, 0x00, 0x00, 0x00, 0x00,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 27027000,
>>> +               .conf = {
>>> +                       0x01, 0x05, 0x00, 0xD4, 0x10, 0x9C, 0x09, 0x64,
>>> +                       0x6B, 0x10, 0x02, 0x51, 0xDF, 0xF2, 0x54, 0x87,
>>> +                       0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0,
>>> +                       0x22, 0x40, 0xE3, 0x26, 0x00, 0x00, 0x00, 0x00,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 74176000,
>>> +               .conf = {
>>> +                       0x01, 0x05, 0x00, 0xD8, 0x10, 0x9C, 0xef, 0x5B,
>>> +                       0x6D, 0x10, 0x01, 0x51, 0xef, 0xF3, 0x54, 0xb9,
>>> +                       0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0,
>>> +                       0x22, 0x40, 0xa5, 0x26, 0x01, 0x00, 0x00, 0x00,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 74250000,
>>> +               .conf = {
>>> +                       0x01, 0x05, 0x00, 0xd8, 0x10, 0x9c, 0xf8, 0x40,
>>> +                       0x6a, 0x10, 0x01, 0x51, 0xff, 0xf1, 0x54, 0xba,
>>> +                       0x84, 0x00, 0x10, 0x38, 0x00, 0x08, 0x10, 0xe0,
>>> +                       0x22, 0x40, 0xa4, 0x26, 0x01, 0x00, 0x00, 0x00,
>>> +               },
>>> +       },
>>> +       {
>>> +               .pixel_clock = 148500000,
>>> +               .conf = {
>>> +                       0x01, 0x05, 0x00, 0xD8, 0x10, 0x9C, 0xf8, 0x40,
>>> +                       0x6A, 0x18, 0x00, 0x51, 0xff, 0xF1, 0x54, 0xba,
>>> +                       0x84, 0x00, 0x10, 0x38, 0x00, 0x08, 0x10, 0xE0,
>>> +                       0x22, 0x40, 0xa4, 0x26, 0x02, 0x00, 0x00, 0x00,
>>> +               },
>>> +       },
>>> +};
>>> +
>>
>> Are you aware of the effort to move these to dt? Since these are
>> board-specific values, it seems incorrect to apply them universally.
>> Shirish has uploaded a patch to the chromium review site to push these
>> into dt (https://chromium-review.googlesource.com/#/c/65581). Maybe
>> you can work that into your patch set?
>>
>
> I have gone through these patches. I am adding Shirish here for further
> discussion on these changes. he can explain better.
>
>>
>>> +static struct hdmiphy_config *hdmiphy_find_conf(struct hdmiphy_context *hdata,
>>> +                       const struct drm_display_mode *mode)
>>> +{
>>> +       int i;
>>> +
>>> +       for (i = 0; i < hdata->nr_confs; i++)
>>> +               if (hdata->confs[i].pixel_clock == (mode->clock * 1000))
>>> +                       return &hdata->confs[i];
>>> +
>>> +       return NULL;
>>> +}
>>> +
>>> +static int hdmiphy_reg_writeb(struct hdmiphy_context *hdata,
>>> +                       u32 reg_offset, u8 value)
>>> +{
>>> +       if (reg_offset >= HDMIPHY_REG_COUNT)
>>> +               return -EINVAL;
>>> +
>>> +       if (i2c_verify_client(hdata->dev)) {
>>
>> Is this necessary?
>
> Based on this check, I was deciding that given dev is i2c or
> platform device. But now when we agreed to split drivers to
> phy and plf driver, I will remove this.
>
>>
>>> +               u8 buffer[2];
>>> +               int ret;
>>> +
>>> +               buffer[0] = reg_offset;
>>> +               buffer[1] = value;
>>> +
>>> +               ret = i2c_master_send(to_i2c_client(hdata->dev),
>>> +                               buffer, 2);
>>> +               if (ret == 2)
>>> +                       return 0;
>>> +               return ret;
>>> +       } else {
>>> +               return -EINVAL;
>>> +       }
>>> +}
>>> +
>>> +static int hdmiphy_reg_write_buf(struct hdmiphy_context *hdata,
>>> +                       u32 reg_offset, const u8 *buf, u32 len)
>>> +{
>>> +       if ((reg_offset + len) > HDMIPHY_REG_COUNT)
>>> +               return -EINVAL;
>>> +
>>> +       if (i2c_verify_client(hdata->dev)) {
>>
>> Is this necessary?
>>
>>
>>> +               int ret;
>>> +
>>> +               ret = i2c_master_send(to_i2c_client(hdata->dev),
>>> +                               buf, len);
>>
>> Does this actually work? You don't seem to be using reg_offset anywhere.
>>
>
> reg_offset is not required here. I should remove this. This
> procedure is to write the complete buf starting from 0.
> hdmiphy_reg_writeb is supposed to be used for writing
> value from some offset.
>

The only way this works is if the first byte in buf is the register
offset, is this why each conf blob starts with 0x1? That seems a bit
error prone.

IMO, you should be using reg_offset instead of encoding the register
address in the blob.

>>> +               if (ret == len)
>>> +                       return 0;
>>> +               return ret;
>>> +       } else {
>>> +               return -EINVAL;
>>> +       }
>>> +}
>>> +
>>> +int exynos_hdmiphy_check_mode(struct device *dev,
>>> +                       struct drm_display_mode *mode)
>>>  {
>>> -       hdmi_attach_hdmiphy_client(client);
>>> +       struct hdmiphy_context *hdata = dev_get_drvdata(dev);
>>> +       const struct hdmiphy_config *conf;
>>> +
>>> +       DRM_DEBUG_KMS("[%d]\n", __LINE__);
>>
>> Maybe you can merge this debug message with the one below.
>>
>
> ok.
>
>>>
>>> -       dev_info(&client->adapter->dev, "attached s5p_hdmiphy "
>>> -               "into i2c adapter successfully\n");
>>> +       if (!hdata) {
>>> +               DRM_ERROR("Invalid arg: hdmiphy device pointer.\n");
>>> +               return -EINVAL;
>>> +       }
>>
>> Can this happen? I think the phy driver registration should be
>> synchronous with the hdmi driver registration. As such, it shouldn't
>> be possible to get a check_mode callback until it's all set up.
>>
>
> I will confirm on this.
>
>>>
>>> +       DRM_DEBUG("xres=%d, yres=%d, refresh=%d, intl=%d clock=%d\n",
>>> +               mode->hdisplay, mode->vdisplay,
>>> +               mode->vrefresh, (mode->flags & DRM_MODE_FLAG_INTERLACE)
>>> +               ? true : false, mode->clock * 1000);
>>> +
>>> +       conf = hdmiphy_find_conf(hdata, mode);
>>> +       if (!conf) {
>>> +               DRM_DEBUG("Display Mode is not supported.\n");
>>> +               return -EINVAL;
>>> +       }
>>>         return 0;
>>>  }
>>>
>>> -static int hdmiphy_remove(struct i2c_client *client)
>>> +int exynos_hdmiphy_set_mode(struct device *dev,
>>> +                       struct drm_display_mode *mode)
>>>  {
>>> -       dev_info(&client->adapter->dev, "detached s5p_hdmiphy "
>>> -               "from i2c adapter successfully\n");
>>> +       struct hdmiphy_context *hdata = dev_get_drvdata(dev);
>>> +
>>> +       DRM_DEBUG_KMS("[%d]\n", __LINE__);
>>> +
>>> +       hdata->current_conf = hdmiphy_find_conf(hdata, mode);
>>> +
>>> +       if (!hdata) {
>>> +               DRM_ERROR("Invalid arg: hdmiphy device pointer.\n");
>>> +               return -EINVAL;
>>> +       }
>>
>> I really hope this check isn't necessary, since you've already
>> dereferenced it 2 lines up :) See my comment above, I don't think you
>> can ever hit this.
>>
>>>
>>> +       if (!hdata->current_conf) {
>>> +               DRM_ERROR("Display Mode is not supported.\n");
>>> +               return -EINVAL;
>>> +       }
>>>         return 0;
>>>  }
>>>
>>> -static struct of_device_id hdmiphy_match_types[] = {
>>> +void exynos_hdmiphy_enable(struct device *dev)
>>> +{
>>> +       struct hdmiphy_context *hdata = dev_get_drvdata(dev);
>>> +       int ret;
>>> +
>>> +       DRM_DEBUG_KMS("[%d]\n", __LINE__);
>>> +
>>> +       if (!hdata) {
>>> +               DRM_ERROR("Invalid arg: hdmiphy device pointer.\n");
>>> +               return;
>>> +       }
>>
>> Same comment as above.
>>
>>> +
>>> +       ret = hdmiphy_reg_writeb(hdata, HDMIPHY_MODE_SET_DONE,
>>> +                       HDMIPHY_MODE_EN);
>>> +       if (ret < 0) {
>>> +               DRM_ERROR("failed to disable hdmiphy.\n");
>>> +               return;
>>> +       }
>>> +}
>>> +
>>> +void exynos_hdmiphy_disable(struct device *dev)
>>> +{
>>> +       struct hdmiphy_context *hdata = dev_get_drvdata(dev);
>>> +       int ret;
>>> +
>>> +       DRM_DEBUG_KMS("[%d]\n", __LINE__);
>>> +
>>> +       if (!hdata) {
>>> +               DRM_ERROR("Invalid arg: hdmiphy device pointer.\n");
>>> +               return;
>>> +       }
>>> +
>>> +       ret = hdmiphy_reg_writeb(hdata, HDMIPHY_MODE_SET_DONE, 0);
>>> +       if (ret < 0) {
>>> +               DRM_ERROR("failed to enable hdmiphy.\n");
>>
>> If you're not going to return the error code, at least print it here.
>>
>
> ok.
>
>>> +               return;
>>> +       }
>>> +}
>>> +
>>> +int exynos_hdmiphy_conf_apply(struct device *dev)
>>> +{
>>> +       struct hdmiphy_context *hdata = dev_get_drvdata(dev);
>>> +       const u8 *hdmiphy_data;
>>> +       int ret;
>>> +
>>> +       DRM_DEBUG_KMS("[%d]\n", __LINE__);
>>> +
>>> +       if (!hdata) {
>>> +               DRM_ERROR("Invalid arg: hdmiphy device pointer.\n");
>>> +               return -EINVAL;
>>> +       }
>>> +
>>> +       /* pixel clock */
>>
>> I don't understand this comment.
>>
>
> I will remove this.
>
>>> +       if (hdata->current_conf)
>>> +               hdmiphy_data = hdata->current_conf->conf;
>>> +       else
>>> +               return -EINVAL;
>>> +
>>> +       ret = hdmiphy_reg_write_buf(hdata, 0, hdmiphy_data,
>>> +                       HDMIPHY_REG_COUNT);
>>
>> I think the only reason this works is b/c you're writing to register offset 0.
>>
>>> +       if (ret) {
>>> +               DRM_ERROR("failed to configure hdmiphy.\n");
>>> +               return -EINVAL;
>>
>> Why don't you return ret?
>>
>
> ok.
>
>>> +       }
>>> +       return 0;
>>> +}
>>> +
>>> +static struct hdmiphy_drv_data exynos4212_hdmiphy_drv_data = {
>>> +       .confs = hdmiphy_4212_configs,
>>> +       .count = ARRAY_SIZE(hdmiphy_4212_configs)
>>> +};
>>> +
>>> +static struct hdmiphy_drv_data exynos4210_hdmiphy_drv_data = {
>>> +       .confs = hdmiphy_4210_configs,
>>> +       .count = ARRAY_SIZE(hdmiphy_4210_configs)
>>> +};
>>> +
>>> +static struct of_device_id hdmiphy_i2c_device_match_types[] = {
>>>         {
>>>                 .compatible = "samsung,exynos5-hdmiphy",
>>> +               .data   = &exynos4212_hdmiphy_drv_data,
>>>         }, {
>>>                 .compatible = "samsung,exynos4210-hdmiphy",
>>> +               .data   = &exynos4210_hdmiphy_drv_data,
>>>         }, {
>>>                 .compatible = "samsung,exynos4212-hdmiphy",
>>> +               .data   = &exynos4212_hdmiphy_drv_data,
>>>         }, {
>>>                 /* end node */
>>>         }
>>>  };
>>>
>>> -struct i2c_driver hdmiphy_driver = {
>>> +static int hdmiphy_i2c_device_probe(struct i2c_client *client,
>>> +       const struct i2c_device_id *id)
>>> +{
>>> +       struct device *dev = &client->dev;
>>> +       struct hdmiphy_context *hdata;
>>> +       struct hdmiphy_drv_data *drv;
>>> +       const struct of_device_id *match;
>>> +
>>> +       DRM_DEBUG_KMS("[%d]\n", __LINE__);
>>> +
>>> +       hdata = devm_kzalloc(dev, sizeof(*hdata), GFP_KERNEL);
>>> +       if (!hdata) {
>>> +               DRM_ERROR("failed to allocate hdmiphy context.\n");
>>> +               return -ENOMEM;
>>> +       }
>>> +
>>> +       match = of_match_node(of_match_ptr(
>>> +               hdmiphy_i2c_device_match_types),
>>> +               dev->of_node);
>>> +
>>> +       if (match == NULL)
>>> +               return -ENODEV;
>>> +
>>> +       drv = (struct hdmiphy_drv_data *)match->data;
>>> +
>>> +       hdata->dev = dev;
>>> +       hdata->confs = drv->confs;
>>> +       hdata->nr_confs = drv->count;
>>> +
>>> +       i2c_set_clientdata(client, hdata);
>>> +
>>> +       return 0;
>>> +}
>>> +
>>> +static const struct i2c_device_id hdmiphy_id[] = {
>>> +       { },
>>> +};
>>> +
>>> +struct i2c_driver hdmiphy_i2c_driver = {
>>>         .driver = {
>>>                 .name   = "exynos-hdmiphy",
>>>                 .owner  = THIS_MODULE,
>>> -               .of_match_table = hdmiphy_match_types,
>>> +               .of_match_table = of_match_ptr(
>>> +                               hdmiphy_i2c_device_match_types),
>>>         },
>>> -       .probe          = hdmiphy_probe,
>>> -       .remove         = hdmiphy_remove,
>>> +       .id_table               = hdmiphy_id,
>>> +       .probe          = hdmiphy_i2c_device_probe,
>>>         .command                = NULL,
>>>  };
>>> -EXPORT_SYMBOL(hdmiphy_driver);
>>> +
>>> +int exynos_hdmiphy_driver_register(void)
>>> +{
>>> +       int ret;
>>> +
>>> +       ret = i2c_add_driver(&hdmiphy_i2c_driver);
>>> +       if (ret)
>>> +               return ret;
>>> +
>>> +       return 0;
>>> +}
>>> +
>>> +void exynos_hdmiphy_driver_unregister(void)
>>> +{
>>> +       i2c_del_driver(&hdmiphy_i2c_driver);
>>> +}
>>> diff --git a/drivers/gpu/drm/exynos/regs-hdmiphy.h b/drivers/gpu/drm/exynos/regs-hdmiphy.h
>>> new file mode 100644
>>> index 0000000..d3f9d87
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/exynos/regs-hdmiphy.h
>>> @@ -0,0 +1,35 @@
>>> +/*
>>> + *
>>> + *  regs-hdmiphy.h
>>> + *
>>> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
>>> + * http://www.samsung.com/
>>> + *
>>> + * HDMI-PHY register header file for Samsung HDMI driver
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> +*/
>>> +
>>> +#ifndef SAMSUNG_REGS_HDMIPHY_H
>>> +#define SAMSUNG_REGS_HDMIPHY_H
>>> +
>>> +/*
>>> + * Register part
>>> +*/
>>> +#define HDMIPHY_MODE_SET_DONE  (0x1f)
>>> +
>>> +/*
>>> + * Bit definition part
>>> + */
>>> +
>>> +/* HDMIPHY_MODE_SET_DONE */
>>> +#define HDMIPHY_MODE_EN                (1 << 7)
>>> +
>>> +/* hdmiphy pmu control bits */
>>> +#define PMU_HDMI_PHY_CONTROL_MASK      (1 << 0)
>>> +#define PMU_HDMI_PHY_ENABLE            (1)
>>> +#define PMU_HDMI_PHY_DISABLE           (0)
>>
>>
>> You don't need the () around simple values
>>
>
> ok.
>
> We also discussed previously to keep independent i2c and
> platform phy drivers in exynos_hdmiphy_i2c.c and
> exynos_hdmiphy_platform.c respectively, which will duplicate
> the code to some extent.
>
> Second point is to implement exynos_i2c_hdmiphy_get_ops()
> and exynos_platform_hdmiphy_get_ops() to get access to all
> callbacks. This will limit the exposure of phy callbacks to the
> phy controller.
>
> Please share your views on this.
>

Yeah, this is a bit tricky, tbh. I think if you're duplicating a bunch
of code, it would be better to keep exynos_hdmiphy.c as a phy helper
library. However most of the code here revolves around writing the
blob to the phy, so I don't think the duplication will be too bad.

It might be worth trying to trim the amount of code down as well. For
instance, you could remove check_mode in favor of just calling
find_conf from the hdmi driver.

Sean

> Regards,
> Rahul Sharma.
>
>>> +
>>> +#endif /* SAMSUNG_REGS_HDMIPHY_H */
>>> --
>>> 1.7.10.4
>>>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux