Re: [RFC 2/3] clk: samsung: Add clock driver for s5pc100

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mateusz,

On Wednesday 28 of August 2013 18:29:16 Mateusz Krawczuk wrote:
> This patch adds new, Common Clock Framework-based clock driver for
> Samsung S5PC100 SoCs. The driver is just added.
> 
> Signed-off-by: Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
> ---
>  .../bindings/clock/samsung,s5pc100-clock.txt       |  72 +++
>  drivers/clk/samsung/Makefile                       |   3 +-
>  drivers/clk/samsung/clk-s5pc100.c                  | 695
> +++++++++++++++++++++ include/dt-bindings/clock/samsung,s5pc100-clock.h 
> | 202 ++++++ 4 files changed, 971 insertions(+), 1 deletion(-)
>  create mode 100644
> Documentation/devicetree/bindings/clock/samsung,s5pc100-clock.txt create
> mode 100644 drivers/clk/samsung/clk-s5pc100.c
>  create mode 100644 include/dt-bindings/clock/samsung,s5pc100-clock.h

I believe that the same list of comments applies to this patch as to your 
patch adding a clock driver for S5PV210, so please keep them in mind, while 
I'll just comment on any other things standing out.

> diff --git
> a/Documentation/devicetree/bindings/clock/samsung,s5pc100-clock.txt
> b/Documentation/devicetree/bindings/clock/samsung,s5pc100-clock.txt new
> file mode 100644
> index 0000000..d026595
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/samsung,s5pc100-clock.txt
> @@ -0,0 +1,72 @@
> +* Samsung S5PC100 Clock Controller
> +
> +The S5PC100 clock controller generates and supplies clock to various
> controllers +within the SoC. The clock binding described here is
> applicable to all SoCs in +the S5PC100 family.
> +
> +Required Properties:
> +
> +- compatible: should be one of the following.
> +  - "samsung,s5pc100-clock" - controller compatible with S5PC100 SoC.
> +
> +- reg: physical base address of the controller and length of memory
> mapped +  region.
> +
> +- #clock-cells: should be 1.
> +
> +Each clock is assigned an identifier and client nodes can use this
> identifier +to specify the clock which they consume. Some of the clocks
> are available only +on a particular S5PC100 SoC and this is specified
> where applicable. +
> +All available clocks are defined as preprocessor macros in
> +dt-bindings/clock/samsung,s5pc100-clock.h header and can be used in
> device +tree sources.
> +
> +External clocks:
> +
> +There are several clocks that are generated outside the SoC. It is
> expected +that they are defined using standard clock bindings with
> following +clock-output-names:
> + - "xxti"    - xtal - required
> + - "xusbxti" - USB xtal - required,
> +
> +
> +Example: Clock controller node:
> +
> +	clock: clock-controller@7e00f000 {
> +		compatible = "samsung,s5pc100-clock";
> +		reg = <0x7e00f000 0x1000>;
> +		#clock-cells = <1>;
> +	};
> +
> +Example: Required external clocks:
> +
> +	fin_pll: clock-xxti {
> +		compatible = "fixed-clock";
> +		clock-output-names = "xxti";
> +		clock-frequency = <12000000>;
> +		#clock-cells = <0>;
> +	};
> +
> +	xusbxti: clock-xusbxti {
> +		compatible = "fixed-clock";
> +		clock-output-names = "xusbxti";
> +		clock-frequency = <48000000>;
> +		#clock-cells = <0>;
> +	};
> +
> +Example: UART controller node that consumes the clock generated by the
> clock +  controller (refer to the standard clock bindings for
> information about +  "clocks" and "clock-names" properties):
> +
> +		uart0: serial@ec000000 {
> +			compatible = "samsung,s5pc100-uart";
> +			reg = <0xec000000 0x100>;
> +			interrupt-parent = <&vic1>;
> +			interrupts = <5>;
> +			clock-names = "uart", "clk_uart_baud2",
> +					"clk_uart_baud3";
> +			clocks = <&clock UART0>, <&clocks UART0>,
> +					<&clock SCLK_UART>;
> +			status = "disabled";
> +		};
> \ No newline at end of file

nit: A newline at end of file should be present.

> diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
> index e08c45e..ff2d65e 100644
> --- a/drivers/clk/samsung/Makefile
> +++ b/drivers/clk/samsung/Makefile
> @@ -11,4 +11,5 @@ obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
>  obj-$(CONFIG_ARCH_S3C64XX)	+= clk-s3c64xx.o
>  ifeq ($(CONFIG_COMMON_CLK), y)
>  obj-$(CONFIG_ARCH_S5PV210)	+= clk-s5pv210.o
> -endif
> \ No newline at end of file
> +obj-$(CONFIG_ARCH_S5PC100)	+= clk-s5pc100.o
> +endif
> diff --git a/drivers/clk/samsung/clk-s5pc100.c
> b/drivers/clk/samsung/clk-s5pc100.c new file mode 100644
> index 0000000..d4d24f1
> --- /dev/null
> +++ b/drivers/clk/samsung/clk-s5pc100.c
> @@ -0,0 +1,695 @@
> +/*
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + * Author: Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Common Clock Framework support for all S5PC100 SoCs.
> +*/
> +
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <mach/regs-clock.h>
> +
> +#include "clk.h"
> +#include "clk-pll.h"
> +
> +#include <dt-bindings/clock/samsung,s5pc100-clock.h>
> +
> +/* S5PC100 clock controller register offsets */
> +#define APLL_LOCK		0x0000
> +#define MPLL_LOCK		0x0004
> +#define EPLL_LOCK		0x0008
> +#define HPLL_LOCK		0x000c
> +#define APLL_CON		0x0100
> +#define MPLL_CON		0x0104
> +#define	EPLL_CON		0x0108

There should be a single space after #define.

> +#define HPLL_CON		0x010c
> +#define CLK_SRC0		0x0200
> +#define CLK_SRC1		0x0204
> +#define CLK_SRC2		0x0208
> +#define CLK_SRC3		0x020c
> +#define CLK_DIV0		0x0300
> +#define CLK_DIV1		0x0304
> +#define CLK_DIV2		0x0308
> +#define CLK_DIV3		0x030c
> +#define CLK_DIV4		0x0310
> +#define CLK_OUT			0x0400
> +#define CLK_GATE_D0_0		0x0500
> +#define CLK_GATE_D0_1		0x0504
> +#define CLK_GATE_D0_2		0x0508
> +#define CLK_GATE_D1_0		0x0520
> +#define CLK_GATE_D1_1		0x0524
> +#define CLK_GATE_D1_2		0x0528
> +#define CLK_GATE_D1_3		0x052c
> +#define CLK_GATE_D1_4		0x0530
> +#define CLK_GATE_D1_5		0x0534
> +#define CLK_GATE_D2_0		0x0540
> +#define CLK_GATE_SCLK_0		0x0560
> +#define	CLK_GATE_SCLK_1		0x0564

Ditto.

Following registers don't look like related to clock configuration.

> +#define SWRESET			0x0000
> +#define	ONENAND_SWRESET		0x0008
> +#define GENERAL_CTRL		0x0100
> +#define	GENERAL_STATUS		0x0104
> +#define	CAM_MUX_SEL		0x0300
> +#define	MIXER_OUT_SEL		0x0304
> +#define	LPMP3_MODE_SEL		0x0308
> +#define MIPI_PHY_CON0		0x0400
> +#define MIPI_PHY_CON1		0x0414
> +#define HDMI_PHY_CON0		0x0420
> +
> +/* Helper macros to define clock arrays. */
> +#define FIXED_RATE_CLOCKS(name)	\
> +		static struct samsung_fixed_rate_clock name[]
> +#define MUX_CLOCKS(name)	\
> +		static struct samsung_mux_clock name[]
> +#define DIV_CLOCKS(name)	\
> +		static struct samsung_div_clock name[]
> +#define GATE_CLOCKS(name)	\
> +		static struct samsung_gate_clock name[]
> +
> +/* Helper macros for gate types present on S5PC100. */
> +#define GATE_BUS(_id, cname, pname, o, b) \
> +		GATE(_id, cname, pname, o, b, 0, 0)
> +#define GATE_SCLK(_id, cname, pname, o, b) \
> +		GATE(_id, cname, pname, o, b, CLK_SET_RATE_PARENT, 0)
> +#define GATE_ON(_id, cname, pname, o, b) \
> +		GATE(_id, cname, pname, o, b, CLK_IGNORE_UNUSED, 0)
> +
> +enum s5pc100_plls {
> +	apll, mpll, epll, hpll,
> +};
> +
> +static  unsigned long s5pc100_clk_regs[] __initdata = {
> +	CLK_SRC0,
> +	CLK_SRC1,
> +	CLK_SRC2,
> +	CLK_SRC3,
> +	CLK_DIV0,
> +	CLK_DIV1,
> +	CLK_DIV2,
> +	CLK_DIV3,
> +	CLK_DIV4,
> +	CLK_OUT,
> +	CLK_GATE_D0_0,
> +	CLK_GATE_D0_1,
> +	CLK_GATE_D0_2,
> +	CLK_GATE_D1_0,
> +	CLK_GATE_D1_1,
> +	CLK_GATE_D1_2,
> +	CLK_GATE_D1_3,
> +	CLK_GATE_D1_4,
> +	CLK_GATE_D1_5,
> +	CLK_GATE_D2_0,
> +	CLK_GATE_SCLK_0,
> +	CLK_GATE_SCLK_1,
> +	APLL_CON,
> +	MPLL_CON,
> +	EPLL_CON,
> +	HPLL_CON,
> +};
> +
> +/* List of parent clocks common for all S5PC100 SoCs. */
> +PNAME(mout_apll_p) = {
> +	"fin_pll",
> +	"fout_apll"
> +};
> +
> +PNAME(mout_mpll_p) = {
> +	"fin_pll",
> +	"fout_mpll"
> +};
> +
> +PNAME(mout_epll_p) = {
> +	"fin_pll",
> +	"fout_epll"
> +};
> +
> +PNAME(mout_href_p) = {
> +	"clk27m",
> +	"fin_pll"
> +};
> +
> +PNAME(mout_hpll_p) = {
> +	"clk27m",
> +	"fout_hpll"
> +};
> +
> +PNAME(mout_am_p) = {
> +	"mout_mpll",
> +	"dout_apll2",
> +};
> +
> +PNAME(mout_mixer_p) = {
> +	"clk27m",
> +	"vclk54",
> +	"mout_hpll",
> +	"none"
> +};
> +
> +PNAME(mout_spi_p) = {
> +	"fin_pll",
> +	"dout_mpll2",
> +	"mout_epll",
> +	"mout_hpll"
> +};
> +
> +PNAME(mout_uart_p) = {
> +	"mout_epll",
> +	"dout_mpll"
> +};
> +
> +PNAME(mout_audio0_p) = {
> +	"mout_epll",
> +	"dout_mpll",
> +	"fin_pll",
> +	"i2scdclk0",
> +	"pcmcdclk0",
> +	"mout_hpll",
> +	"none",
> +	"none"
> +};
> +
> +PNAME(mout_audio1_p) = {
> +	"mout_epll",
> +	"dout_mpll",
> +	"fin_pll",
> +	"i2scdclk1",
> +	"pcmcdclk1",
> +	"mout_hpll",
> +	"none",
> +	"none"
> +};
> +
> +PNAME(mout_audio2_p) = {
> +	"mout_epll",
> +	"dout_mpll",
> +	"fin_pll",
> +	"i2scdclk2",
> +	"mout_hpll",
> +	"none",
> +	"none",
> +	"none"
> +};
> +
> +PNAME(mout_spdif_p)	= {
> +	"dout_audio0",
> +	"dout_audio1",
> +	"dout_audio3",
> +	"none"
> +};
> +
> +PNAME(mout_fimc_p) = {
> +	"mout_epll",
> +	"dout_mpll",
> +	"mout_hpll",
> +	"vclk54"
> +};
> +
> +PNAME(mout_mmc_p) = {
> +	"mout_epll",
> +	"dout_mpll",
> +	"fin_pll",
> +	"mout_hpll"
> +};
> +
> +PNAME(mout_mmc0_p) = {
> +	"mout_epll",
> +	"dout_mpll",
> +	"fin_pll",
> +	"none"
> +};
> +
> +

nit: Stray blank line.

> +PNAME(mout_irda_p) = {
> +	"mout_epll",
> +	"dout_mpll",
> +	"mout_hpll",
> +	"none"
> +};
> +
> +PNAME(mout_pwi_p) = {
> +	"mout_hpll",
> +	"dout_mpll",
> +	"mout_epll",
> +	"none"
> +};
> +
> +PNAME(mout_uhost_p) = {
> +	"mout_epll",
> +	"dout_mpll",
> +	"mout_hpll",
> +	"clk48m"
> +};
> +
> +PNAME(mout_onenand_p) = {
> +	"dout_d1_bus",
> +	"dout_d0_bus"
> +};
> +
> +PNAME(mout_hclk_2_p) = {
> +	"fout_epll",
> +	"i2scdclk0"
> +};
> +
> +PNAME(mout_i2s_2_p) = {
> +	"fout_epll",
> +	"i2scdclk0",
> +	"dout_audio0",
> +	"none"
> +};
> +
> +MUX_CLOCKS(s5pc100_mux_clks)  __initdata = {
> +	MUX(MOUT_ONENAND, "mout_onenand", mout_onenand_p, CLK_SRC0, 24, 1),
> +	MUX(MOUT_HREF, "mout_href", mout_href_p, CLK_SRC0, 20, 1),
> +	MUX(MOUT_AM, "mout_am", mout_am_p, CLK_SRC0, 16, 1),
> +	MUX(MOUT_HPLL, "mout_hpll", mout_hpll_p, CLK_SRC0, 12, 1),
> +	MUX(MOUT_EPLL, "mout_epll", mout_epll_p, CLK_SRC0, 8, 1),
> +	MUX(MOUT_MPLL, "mout_mpll", mout_mpll_p, CLK_SRC0, 4, 1),
> +	MUX(MOUT_APLL, "mout_apll", mout_apll_p, CLK_SRC0, 0, 1),
> +
> +	MUX(MOUT_UHOST, "mout_uhost", mout_uhost_p, CLK_SRC1, 20, 2),
> +	MUX(MOUT_IRDA, "mout_irda", mout_irda_p, CLK_SRC1, 16, 2),
> +	MUX(MOUT_SPI2, "mout_spi2", mout_spi_p, CLK_SRC1, 12, 2),
> +	MUX(MOUT_SPI1, "mout_spi1", mout_spi_p, CLK_SRC1, 8, 2),
> +	MUX(MOUT_SPI0, "mout_spi0", mout_spi_p, CLK_SRC1, 4, 2),
> +	MUX(MOUT_UART, "mout_uart", mout_uart_p, CLK_SRC1, 0, 2),
> +
> +	MUX(MOUT_MIXER, "mout_mixer", mout_mixer_p, CLK_SRC2, 28, 2),
> +	MUX(MOUT_FIMC2, "mout_fimc2", mout_fimc_p, CLK_SRC2, 24, 2),
> +	MUX(MOUT_FIMC1, "mout_fimc1", mout_fimc_p, CLK_SRC2, 20, 2),
> +	MUX(MOUT_FIMC0, "mout_fimc0", mout_fimc_p, CLK_SRC2, 16, 2),
> +	MUX(MOUT_LCD, "mout_lcd", mout_fimc_p, CLK_SRC2, 12, 2),
> +	MUX(MOUT_MMC2, "mout_mmc2", mout_mmc_p, CLK_SRC2, 8, 4),
> +	MUX(MOUT_MMC1, "mout_mmc1", mout_mmc_p, CLK_SRC2, 4, 4),
> +	MUX(MOUT_MMC0, "mout_mmc0", mout_mmc0_p, CLK_SRC2, 0, 4),
> +
> +	MUX(MOUT_SPDIF, "mout_spdif", mout_spdif_p, CLK_SRC3, 24, 2),
> +	MUX(MOUT_AUDIO2, "mout_audio2", mout_audio2_p, CLK_SRC3, 20, 3),
> +	MUX(MOUT_AUDIO1, "mout_audio1", mout_audio1_p, CLK_SRC3, 16, 3),
> +	MUX(MOUT_AUDIO0, "mout_audio0", mout_audio0_p, CLK_SRC3, 12, 3),
> +	MUX(MOUT_I2S_2, "mout_i2s_2", mout_i2s_2_p, CLK_SRC3, 8, 2),
> +	MUX(MOUT_HCLK_D2, "mout_hclk_2", mout_hclk_2_p, CLK_SRC3, 4, 1),
> +	MUX(MOUT_PWI, "mout_pwi", mout_pwi_p, CLK_SRC3, 0, 2),
> +};
> +
> +/* register s5pc100 clocks */

nit: The comment above doesn't add any information.

> +/* Fixed rate clocks generated outside the soc */
> +FIXED_RATE_CLOCKS(s5pc100_fixed_rate_ext_clks) __initdata = {
> +	FRATE(0, "xxti", NULL, CLK_IS_ROOT, 0),
> +	FRATE(0, "xusbxti", NULL, CLK_IS_ROOT, 0),
> +};
> +
> +/* Fixed rate clocks generated inside the soc */
> +FIXED_RATE_CLOCKS(s5pc100_fixed_rate_clks) __initdata = {
> +	FRATE(0, "clk27m", NULL, CLK_IS_ROOT, 27000000),
> +	FRATE(0, "clk48m", NULL, CLK_IS_ROOT, 48000000),
> +};
> +
> +/* list of divider clocks supported in all s5pc100 soc's */
> +DIV_CLOCKS(s5pc100_div_clks) __initdata = {
> +	DIV(DOUT_SECSS, "dout_secss", "dout_d0_bus", CLK_DIV0, 16, 3),
> +	DIV(DOUT_PCLK0, "dout_pclk0", "dout_d0_bus", CLK_DIV0, 12, 3),
> +	DIV(DOUT_D0_BUS, "dout_d0_bus", "dout_arm", CLK_DIV0, 8, 3),
> +	DIV(DOUT_ARM, "dout_arm", "dout_apll", CLK_DIV0, 4, 3),
> +	DIV(DOUT_APLL, "dout_apll", "mout_apll", CLK_DIV0, 0, 1),
> +
> +	DIV(DOUT_CAM, "dout_cam", "dout_mpll2", CLK_DIV1, 24, 5),
> +	DIV(DOUT_ONENAND, "dout_onenand", "mout_onenand", CLK_DIV1, 20, 2),
> +	DIV(DOUT_PCLK1, "dout_pclk1", "dout_d1_bus", CLK_DIV1, 16, 3),
> +	DIV(DOUT_D1_BUS, "dout_d1_bus", "mout_am", CLK_DIV1, 12, 3),
> +	DIV(DOUT_MPLL2, "dout_mpll2", "mout_am", CLK_DIV1, 8, 1),
> +	DIV(DOUT_MPLL, "dout_mpll", "mout_am", CLK_DIV1, 4, 2),
> +	DIV(DOUT_APLL2, "dout_apll2", "mout_apll", CLK_DIV1, 0, 3),
> +
> +	DIV(DOUT_UHOST, "dout_uhost", "mout_uhost", CLK_DIV2, 20, 4),
> +	DIV(DOUT_IRDA, "dout_irda", "mout_irda", CLK_DIV2, 16, 4),
> +	DIV(DOUT_SPI2, "dout_spi2", "mout_spi2", CLK_DIV2, 12, 4),
> +	DIV(DOUT_SPI1, "dout_spi1", "mout_spi1", CLK_DIV2, 8, 4),
> +	DIV(DOUT_SPI0, "dout_spi0", "mout_spi0", CLK_DIV2, 4, 4),
> +	DIV(DOUT_UART, "dout_uart", "mout_uart", CLK_DIV2, 0, 4),
> +
> +	DIV(DOUT_HDMI, "dout_hdmi", "mout_hpll", CLK_DIV3, 28, 4),
> +	DIV(DOUT_FIMC2, "dout_fimc2", "mout_fimc2", CLK_DIV3, 24, 4),
> +	DIV(DOUT_FIMC1, "dout_fimc1", "mout_fimc1", CLK_DIV3, 20, 4),
> +	DIV(DOUT_FIMC0, "dout_fimc0", "mout_fimc0", CLK_DIV3, 16, 4),
> +	DIV(DOUT_LCD, "dout_lcd", "mout_lcd", CLK_DIV3, 12, 4),
> +	DIV(DOUT_MMC2, "dout_mmc2", "mout_mmc2", CLK_DIV3, 8, 4),
> +	DIV(DOUT_MMC1, "dout_mmc1", "mout_mmc1", CLK_DIV3, 4, 4),
> +	DIV(DOUT_MMC0, "dout_mmc0", "mout_mmc0", CLK_DIV3, 0, 4),
> +
> +	DIV(DOUT_AUDIO2, "dout_audio2", "mout_audio2", CLK_DIV4, 20, 4),
> +	DIV(DOUT_AUDIO1, "dout_audio1", "mout_audio1", CLK_DIV4, 16, 4),
> +	DIV(DOUT_AUDIO0, "dout_audio0", "mout_audio0", CLK_DIV4, 12, 4),
> +	DIV(DOUT_I2S_2, "dout_i2s_2", "mout_i2s_2", CLK_DIV4, 8, 4),
> +	DIV(DOUT_HCLK_2, "dout_hclk_2", "mout_hclk_2", CLK_DIV4, 4, 3),
> +	DIV(DOUT_PWI, "dout_pwi", "mout_pwi", CLK_DIV4, 0, 3),
> +};
> +
> +/*TODO list of gate clocks supported in all s5pc100 soc's */

Why the TODO? Also there should be a space after the opening asterisk.

> +struct samsung_gate_clock s5pc100_gate_clks[] __initdata = {
> +

nit: Stray blank line.

> +	GATE(CSSYS, "cssys", "dout_d0_bus", CLK_GATE_D0_0, 6, 0, 0),
> +	GATE(SECSS, "secss", "dout_d0_bus", CLK_GATE_D0_0, 5, 0, 0),
> +	GATE(G2D, "g2d", "dout_d0_bus", CLK_GATE_D0_0, 4, 0, 0),
> +	GATE(MDMA, "mdma", "dout_d0_bus", CLK_GATE_D0_0, 3, 0, 0),
> +	GATE(CFCON, "cfcon", "dout_d0_bus", CLK_GATE_D0_0, 2, 0, 0),
> +	GATE(TZIC, "tzic", "dout_d0_bus", CLK_GATE_D0_0, 1, 0, 0),
> +
> +	GATE(EBI, "ebi", "dout_d0_bus", CLK_GATE_D0_1, 5, 0, 0),
> +	GATE(INTMEM, "intmem", "dout_d0_bus", CLK_GATE_D0_1, 4, 0, 0),
> +	GATE(NFCON, "nfcon", "dout_d0_bus", CLK_GATE_D0_1, 3, 0, 0),
> +	GATE(ONENAND, "onenand", "dout_d0_bus", CLK_GATE_D0_1, 2, 0, 0),
> +	GATE(SROMC, "sromc", "dout_d0_bus", CLK_GATE_D0_1, 1, 0, 0),
> +
> +	GATE(SDM, "sdm", "dout_d0_bus", CLK_GATE_D1_0, 2, 0, 0),
> +	GATE(SECKEY, "seckey", "dout_pclk0", CLK_GATE_D1_0, 1, 0, 0),
> +
> +	GATE(HSMMC2, "hsmmc2", "dout_d1_bus", CLK_GATE_D1_0, 7, 0, 0),
> +	GATE(HSMMC1, "hsmmc1", "dout_d1_bus", CLK_GATE_D1_0, 6, 0, 0),
> +	GATE(HSMMC0, "hsmmc0", "dout_d1_bus", CLK_GATE_D1_0, 5, 0, 0),
> +	GATE(MODEMIF, "modemif", "dout_d1_bus", CLK_GATE_D1_0, 4, 0, 0),
> +	GATE_A(USB_OTG, "usb_otg", "dout_d1_bus",
> +			CLK_GATE_D1_0, 3, 0, 0, "usbotg"),
> +	GATE_A(USB_HOST, "usb_host", "dout_d1_bus",
> +			CLK_GATE_D1_0, 2, 0, 0, "usbhost"),
> +	GATE(PDMA1, "pdma1", "dout_d1_bus", CLK_GATE_D1_0, 1, 0, 0),
> +	GATE(PDMA0, "pdma0", "dout_d1_bus", CLK_GATE_D1_0, 0, 0, 0),
> +
> +	GATE(G3D, "g3d", "dout_d1_bus", CLK_GATE_D1_1, 8, 0, 0),
> +	GATE(CSI, "csi", "dout_d1_bus", CLK_GATE_D1_1, 7, 0, 0),
> +	GATE(DSIM, "dsi", "dout_pclk1", CLK_GATE_D1_1, 6, 0, 0),
> +	GATE(JPEG, "jpeg", "dout_d1_bus", CLK_GATE_D1_1, 5, 0, 0),
> +	GATE(FIMC2, "fimc2", "dout_d1_bus", CLK_GATE_D1_1, 4, 0, 0),
> +	GATE(FIMC1, "fimc1", "dout_d1_bus", CLK_GATE_D1_1, 3, 0, 0),
> +	GATE(FIMC0, "fimc0", "dout_d1_bus", CLK_GATE_D1_1, 2, 0, 0),
> +	GATE(ROTATOR, "rotator", "dout_d1_bus", CLK_GATE_D1_1, 1, 0, 0),
> +	GATE(LCDCON, "lcd", "dout_d1_bus", CLK_GATE_D1_1, 0, 0, 0),
> +
> +	GATE(MFC, "mfc", "dout_d1_bus", CLK_GATE_D1_2, 4, 0, 0),
> +	GATE(HDMI, "hdmi", "dout_d1_bus", CLK_GATE_D1_2, 3, 0, 0),
> +	GATE(MIXER, "mixer", "dout_d1_bus", CLK_GATE_D1_2, 2, 0, 0),
> +	GATE(VP, "vp", "dout_d1_bus", CLK_GATE_D1_2, 1, 0, 0),
> +	GATE(TV, "tv", "dout_d1_bus", CLK_GATE_D1_2, 0, 0, 0),
> +
> +	GATE(RTC, "rtc", "dout_d1_bus", CLK_GATE_D1_3, 9, 0, 0),
> +	GATE(WDT, "watchdog", "dout_pclk1", CLK_GATE_D1_3, 8, 0, 0),
> +	GATE(SYSTIMER, "systimer", "dout_d1_bus", CLK_GATE_D1_3, 7, 0, 0),
> +	GATE(PWM, "pwm", "dout_pclk1", CLK_GATE_D1_3, 6, 0, 0),
> +	GATE(IEC, "iec", "dout_d1_bus", CLK_GATE_D1_3, 3, 0, 0),
> +	GATE(APC, "apc", "dout_d1_bus", CLK_GATE_D1_3, 2, 0, 0),
> +
> +	GATE(HSIRX, "hsirx", "dout_d1_bus", CLK_GATE_D1_4, 13, 0, 0),
> +	GATE(HSITX, "hsitx", "dout_d1_bus", CLK_GATE_D1_4, 12, 0, 0),
> +	GATE(CCAN1, "ccan1", "dout_d1_bus", CLK_GATE_D1_4, 11, 0, 0),
> +	GATE(CCAN0, "ccan0", "dout_d1_bus", CLK_GATE_D1_4, 10, 0, 0),
> +	GATE(IRDA, "irda", "dout_d1_bus", CLK_GATE_D1_4, 9, 0, 0),
> +	GATE(SPI2, "spi2", "dout_d1_bus", CLK_GATE_D1_4, 8, 0, 0),
> +	GATE(SPI1, "spi1", "dout_d1_bus", CLK_GATE_D1_4, 7, 0, 0),
> +	GATE(SPI0, "spi0", "dout_d1_bus", CLK_GATE_D1_4, 6, 0, 0),
> +	GATE(I2C_HDMI, "i2c_hdmi", "dout_d1_bus", CLK_GATE_D1_4, 5, 0, 0),
> +	GATE(I2C, "i2c", "dout_d1_bus", CLK_GATE_D1_4, 4, 0, 0),
> +
> +	GATE(UART3, "uart3", "dout_pclk1", CLK_GATE_D1_4, 3, 0, 0),
> +	GATE(UART2, "uart2", "dout_pclk1", CLK_GATE_D1_4, 2, 0, 0),
> +	GATE(UART1, "uart1", "dout_pclk1", CLK_GATE_D1_4, 1, 0, 0),
> +	GATE(UART0, "uart0", "dout_pclk1", CLK_GATE_D1_4, 0, 0, 0),
> +
> +	GATE(KEYIF, "keyif", "dout_pclk1", CLK_GATE_D1_5, 8, 0, 0),
> +	GATE(TSADC, "tsadc", "dout_pclk1", CLK_GATE_D1_5, 7, 0, 0),
> +	GATE(SPDIF, "spdif", "dout_pclk1", CLK_GATE_D1_5, 6, 0, 0),
> +	GATE(PCM1, "pcm1", "dout_pclk1", CLK_GATE_D1_5, 5, 0, 0),
> +	GATE(PCM0, "pcm0", "dout_pclk1", CLK_GATE_D1_5, 4, 0, 0),
> +	GATE(AC97, "ac97", "dout_pclk1", CLK_GATE_D1_5, 3, 0, 0),
> +	GATE(I2S2, "i2s2", "dout_pclk1", CLK_GATE_D1_5, 2, 0, 0),
> +	GATE(I2S1, "i2s1", "dout_pclk1", CLK_GATE_D1_5, 1, 0, 0),
> +	GATE(I2S0, "i2s0", "dout_pclk1", CLK_GATE_D1_5, 4, 0, 0),
> +
> +	GATE(I2S_2, "i2s_2", "dout_pclk2", CLK_GATE_D2_0, 1, 0, 0),
> +
> +	GATE(SCLK_MMC2_48, "sclk_mmc2_48", "clk48m",
> +					CLK_GATE_SCLK_0, 17, 0, 0),
> +	GATE(SCLK_MMC1_48, "sclk_mmc1_48", "clk48m",
> +					CLK_GATE_SCLK_0, 16, 0, 0),
> +	GATE(SCLK_MMC0_48, "sclk_mmc0_48", "clk48m",
> +					CLK_GATE_SCLK_0, 15, 0, 0),
> +	GATE(SCLK_MMC2, "sclk_mmc2", "dout_mmc2", CLK_GATE_SCLK_0, 14, 0, 0),
> +	GATE(SCLK_MMC1, "sclk_mmc1", "dout_mmc1", CLK_GATE_SCLK_0, 13, 0, 0),
> +	GATE(SCLK_MMC0, "sclk_mmc0", "dout_mmc0", CLK_GATE_SCLK_0, 12, 0, 0),
> +	GATE(SCLK_USBHOST, "sclk_usbhost", "dout_uhost",
> +					CLK_GATE_SCLK_0, 11, 0, 0),
> +	GATE(SCLK_IRDA, "sclk_irda", "dout_irda", CLK_GATE_SCLK_0, 10, 0, 0),
> +	GATE(SCLK_SPI2_48, "sclk_spi2_48", "clk48m",
> +					CLK_GATE_SCLK_0, 9, 0, 0),
> +	GATE(SCLK_SPI1_48, "sclk_spi1_48", "clk48m",
> +					CLK_GATE_SCLK_0, 8, 0, 0),
> +	GATE(SCLK_SPI0_48, "sclk_spi0_48", "clk48m",
> +					CLK_GATE_SCLK_0, 7, 0, 0),
> +	GATE(SCLK_SPI2, "sclk_spi2", "dout_spi2", CLK_GATE_SCLK_0, 6, 0, 0),
> +	GATE(SCLK_SPI1, "sclk_spi1", "dout_spi1", CLK_GATE_SCLK_0, 5, 0, 0),
> +	GATE(SCLK_SPI0, "sclk_spi0", "dout_spi0", CLK_GATE_SCLK_0, 4, 0, 0),
> +	GATE(SCLK_UART, "sclk_uart", "dout_uart", CLK_GATE_SCLK_0, 3, 0, 0),
> +	GATE(SCLK_ONENAND, "sclk_onenand", "dout_onenand",
> +					CLK_GATE_SCLK_0, 2, 0, 0),
> +	GATE(SCLK_PWI, "sclk_pwi", "dout_pwi", CLK_GATE_SCLK_0, 1, 0, 0),
> +	GATE(SCLK_HPM, "sclk_hpm", "dout_d1_bus", CLK_GATE_SCLK_0, 0, 0, 0),
> +
> +	GATE(SCLK_CAM, "sclk_cam", "dout_cam", CLK_GATE_SCLK_1, 12, 0, 0),
> +	GATE(SCLK_SPDIF, "sclk_spdif", "mout_spdif",
> +					CLK_GATE_SCLK_1, 11, 0, 0),
> +	GATE(SCLK_AUDIO2, "sclk_audio2", "dout_audio2",
> +					CLK_GATE_SCLK_1, 10, 0, 0),
> +	GATE(SCLK_AUDIO1, "sclk_audio1", "dout_audio1",
> +					CLK_GATE_SCLK_1, 9, 0, 0),
> +	GATE(SCLK_AUDIO0, "sclk_audio0", "dout_audio0",
> +					CLK_GATE_SCLK_1, 8, 0, 0),
> +	GATE(SCLK_HDMI, "sclk_hdmi", "dout_hdmi", CLK_GATE_SCLK_1, 7, 0, 0),
> +	GATE(SCLK_MIXER, "sclk_mixer", "mout_mixer",
> +					CLK_GATE_SCLK_1, 6, 0, 0),
> +	GATE(SCLK_VDAC54, "sclk_vdac54", "vclk54", CLK_GATE_SCLK_1, 5, 0, 0),
> +	GATE(SCLK_TV54, "sclk_tv54", "vclk54", CLK_GATE_SCLK_1, 4, 0, 0),
> +	GATE(SCLK_FIMC2, "sclk_fimc2", "dout_fimc2", CLK_GATE_SCLK_1, 3, 0, 0),
> +	GATE(SCLK_FIMC1, "sclk_fimc1", "dout_fimc1", CLK_GATE_SCLK_1, 2, 0,
> 0), +	GATE(SCLK_FIMC0, "sclk_fimc0", "dout_fimc0", CLK_GATE_SCLK_1, 1,
> 0, 0), +	GATE(SCLK_LCD, "sclk_lcd", "dout_lcd", CLK_GATE_SCLK_1, 0, 0,
> 0), +};
> +
> +/* list of all parent clock list */
> +static struct samsung_clock_alias s5pc100_clock_aliases[] = {
> +	ALIAS(FIMC0, "s5pc100-fimc.0", "fimc"),
> +	ALIAS(FIMC1, "s5pc100-fimc.1", "fimc"),
> +	ALIAS(FIMC2, "s5pc100-fimc.2", "fimc"),
> +	ALIAS(MOUT_FIMC2, NULL, "mout_fimc2"),
> +	ALIAS(MOUT_FIMC1, NULL, "mout_fimc1"),
> +	ALIAS(MOUT_FIMC0, NULL, "mout_fimc0"),
> +	ALIAS(SCLK_FIMC0, "s5pc100-fimc.0", "sclk_fimc"),
> +	ALIAS(SCLK_FIMC1, "s5pc100-fimc.1", "sclk_fimc"),
> +	ALIAS(SCLK_FIMC2, "s5pc100-fimc.2", "sclk_fimc"),
> +
> +	ALIAS(MOUT_APLL, NULL, "mout_apll"),
> +	ALIAS(MOUT_MPLL, NULL, "mout_mpll"),
> +	ALIAS(MOUT_EPLL, NULL, "mout_epll"),
> +	ALIAS(MOUT_HPLL, NULL, "mout_hpll"),
> +	ALIAS(MOUT_HPLL, NULL, "sclk_hpll"),
> +	ALIAS(UART0, "s3c6400-uart.0", "uart"),
> +	ALIAS(UART1, "s3c6400-uart.1", "uart"),
> +	ALIAS(UART2, "s3c6400-uart.2", "uart"),
> +	ALIAS(UART3, "s3c6400-uart.3", "uart"),
> +	ALIAS(UART0, "s3c6400-uart.0", "clk_uart_baud0"),
> +	ALIAS(UART1, "s3c6400-uart.1", "clk_uart_baud0"),
> +	ALIAS(UART2, "s3c6400-uart.2", "clk_uart_baud0"),
> +	ALIAS(UART3, "s3c6400-uart.3", "clk_uart_baud0"),
> +	ALIAS(UART0, "s3c6400-uart.0", "clk_uart_baud2"),
> +	ALIAS(UART1, "s3c6400-uart.1", "clk_uart_baud2"),
> +	ALIAS(UART2, "s3c6400-uart.2", "clk_uart_baud2"),
> +	ALIAS(UART3, "s3c6400-uart.3", "clk_uart_baud2"),
> +	ALIAS(SCLK_UART, "s3c6400-uart.0", "clk_uart_baud3"),
> +	ALIAS(SCLK_UART, "s3c6400-uart.1", "clk_uart_baud3"),
> +	ALIAS(SCLK_UART, "s3c6400-uart.2", "clk_uart_baud3"),
> +	ALIAS(SCLK_UART, "s3c6400-uart.3", "clk_uart_baud3"),
> +
> +	ALIAS(HSMMC0, "s3c-sdhci.0", "hsmmc"),
> +	ALIAS(HSMMC1, "s3c-sdhci.1", "hsmmc"),
> +	ALIAS(HSMMC2, "s3c-sdhci.2", "hsmmc"),
> +	ALIAS(HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"),
> +	ALIAS(HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"),
> +	ALIAS(HSMMC2, "s3c-sdhci.2", "mmc_busclk.0"),
> +	ALIAS(SCLK_MMC0, "s3c-sdhci.0", "mmc_busclk.2"),
> +	ALIAS(SCLK_MMC1, "s3c-sdhci.1", "mmc_busclk.2"),
> +	ALIAS(SCLK_MMC2, "s3c-sdhci.2", "mmc_busclk.2"),
> +	ALIAS(SCLK_MMC0_48, "s3c-sdhci.0", "mmc_busclk.3"),
> +	ALIAS(SCLK_MMC1_48, "s3c-sdhci.1", "mmc_busclk.3"),
> +	ALIAS(SCLK_MMC2_48, "s3c-sdhci.2", "mmc_busclk.3"),
> +
> +	ALIAS(SPI0, "s5pc100-spi.0", "spi"),
> +	ALIAS(SPI1, "s5pc100-spi.1", "spi"),
> +	ALIAS(SPI2, "s5pc100-spi.2", "spi"),
> +	ALIAS(SPI0, "s5pc100-spi.0", "spi_busclk0"),
> +	ALIAS(SPI1, "s5pc100-spi.1", "spi_busclk0"),
> +	ALIAS(SPI2, "s5pc100-spi.2", "spi_busclk0"),
> +	ALIAS(SCLK_SPI0_48, "s5pc100-spi.0", "spi_busclk1"),
> +	ALIAS(SCLK_SPI1_48, "s5pc100-spi.1", "spi_busclk1"),
> +	ALIAS(SCLK_SPI2_48, "s5pc100-spi.2", "spi_busclk1"),
> +	ALIAS(SCLK_SPI0, "s5pc100-spi.0", "spi_busclk2"),
> +	ALIAS(SCLK_SPI1, "s5pc100-spi.1", "spi_busclk2"),
> +	ALIAS(SCLK_SPI2, "s5pc100-spi.2", "spi_busclk2"),
> +	ALIAS(PDMA0, "dma-pl330.0", "apb_pclk"),
> +	ALIAS(PDMA1, "dma-pl330.1", "apb_pclk"),
> +	ALIAS(PWM, NULL, "timers"),
> +
> +	ALIAS(JPEG, NULL, "jpeg"),
> +	ALIAS(MFC, "s5p-mfc", "mfc"),
> +	ALIAS(TV, "s5p-sdo", "dac"),
> +	ALIAS(MIXER, "s5p-mixer", "mixer"),
> +	ALIAS(VP, "s5p-mixer", "vp"),
> +	ALIAS(HDMI, "s5p-hdmi", "hdmi"),
> +	ALIAS(SCLK_HDMI, "s5p-hdmi", "hdmiphy"),
> +
> +	ALIAS(USB_OTG, NULL, "otg"),
> +	ALIAS(USB_HOST, NULL, "usb-host"),
> +	ALIAS(USB_HOST, NULL, "usbhost"),
> +	ALIAS(LCDCON, "s5pc100-fb", "lcd"),
> +	ALIAS(CFCON, NULL, "cfcon"),
> +	ALIAS(SYSTIMER, NULL, "systimer"),
> +	ALIAS(WDT, NULL, "watchdog"),
> +	ALIAS(RTC, NULL, "rtc"),
> +	ALIAS(I2C, "s3c2440-i2c.0", "i2c"),
> +	ALIAS(CCAN0, NULL, "ccan"),
> +	ALIAS(CCAN1, NULL, "ccan"),
> +	ALIAS(I2C_HDMI, "s3c2440-i2c.1", "i2c"),
> +	ALIAS(HSITX, NULL, "hsitx"),
> +	ALIAS(HSIRX, NULL, "hsirx"),
> +	ALIAS(TSADC, NULL, "adc"),
> +	ALIAS(KEYIF, "s5pc100-keypad", "keypad"),
> +	ALIAS(I2S0, "samsung-i2s.0", "iis"),
> +	ALIAS(I2S1, "samsung-i2s.1", "iis"),
> +	ALIAS(I2S2, "samsung-i2s.2", "iis"),
> +	ALIAS(SPDIF, NULL, "spdif"),
> +	ALIAS(ROTATOR, NULL, "rot"),
> +	ALIAS(DOUT_ARM, NULL, "armclk"),
> +	ALIAS(SCLK_AUDIO0, "soc-audio.0", "sclk_audio"),
> +	ALIAS(SCLK_AUDIO1, "soc-audio.1", "sclk_audio"),
> +	ALIAS(SCLK_AUDIO2, "soc-audio.2", "sclk_audio"),
> +	ALIAS(KEYIF, NULL, "keypad"),
> +
> +	ALIAS(MFC, "s5p-mfc", "sclk_mfc"),
> +	ALIAS(G2D, "s5p-g2d", "fimg2d"),
> +

nit: Stray blank line.

> +};
> +
> +static unsigned long s5pc100_get_xom(void)
> +{
> +	unsigned long xom = 0;
> +	struct device_node *np;
> +
> +	np = of_find_compatible_node(NULL, NULL, "samsung,s5pc100-chipid");
> +	if (np) {
> +		void __iomem *chipid_base = of_iomap(np, 0);
> +
> +		if (!chipid_base)
> +			panic("%s: failed to map chipid\n", __func__);
> +		else {
> +			xom = readl(chipid_base + 8);
> +			iounmap(chipid_base);
> +		}
> +	}
> +
> +	return xom;
> +}
> +
> +static void __init s5pc100_clk_register_finpll(unsigned long xom)
> +{
> +	struct samsung_fixed_rate_clock fclk;
> +	struct clk *clk;
> +	unsigned long finpll_f = 24000000;
> +	char *parent_name;
> +
> +	parent_name = xom & 1 ? "xusbxti" : "xxti";
> +	clk = clk_get(NULL, parent_name);
> +	if (IS_ERR(clk))
> +		pr_err("%s: failed to lookup parent clock %s, assuming fin_pll clock
> frequency is 24MHz\n", +		__func__, parent_name);
> +	else
> +		finpll_f = clk_get_rate(clk);
> +
> +	fclk.id = FIN_PLL;
> +	fclk.name = "fin_pll";
> +	fclk.parent_name = NULL;
> +	fclk.flags = CLK_IS_ROOT;
> +	fclk.fixed_rate = finpll_f;
> +	samsung_clk_register_fixed_rate(&fclk, 1);
> +

nit: Stray blank line.

> +}
> +
> +static void __init s5pc100_clk_register_fixed_ext(unsigned long xxti_f,
> +						unsigned long xusbxti_f)
> +{
> +	s5pc100_fixed_rate_ext_clks[0].fixed_rate = xxti_f;
> +	s5pc100_fixed_rate_ext_clks[1].fixed_rate = xusbxti_f;
> +	samsung_clk_register_fixed_rate(s5pc100_fixed_rate_ext_clks,
> +				ARRAY_SIZE(s5pc100_fixed_rate_ext_clks));
> +}
> +
> +static struct samsung_pll_clock s5pc100_pll_clks[] __initdata = {
> +	[apll] = PLL(pll_6522x, FOUT_APLL, "fout_apll", "fin_pll",
> +						APLL_LOCK, APLL_CON, NULL),
> +	[mpll] = PLL(pll_6545a, FOUT_MPLL, "fout_mpll", "fin_pll",
> +						MPLL_LOCK, MPLL_CON, NULL),
> +	[epll] = PLL(pll_6545a, FOUT_EPLL, "fout_epll", "fin_pll",
> +						EPLL_LOCK, EPLL_CON, NULL),
> +	[hpll] = PLL(pll_6545a, FOUT_HPLL, "fout_hpll", "mout_href",
> +						HPLL_LOCK, HPLL_CON, NULL),
> +};
> +
> +void __init s5pc100_clk_init(struct device_node *np, unsigned long
> xxti_f, +			unsigned long xusbxti_f, void __iomem *reg_base)
> +{
> +	unsigned long xom = s5pc100_get_xom();

nit: A blank line should be separating variable declarations and code.

> +	if (np) {
> +		reg_base = of_iomap(np, 0);
> +		if (!reg_base)
> +			panic("%s: failed to map registers\n", __func__);
> +	}

nit: A blank line would be nice here.

> +	samsung_clk_init(np, reg_base, NR_CLKS, s5pc100_clk_regs,
> +			ARRAY_SIZE(s5pc100_clk_regs), NULL, 0);

nit: A blank line would be nice here.

> +	/* Register external clocks. */
> +	if (!np)
> +		s5pc100_clk_register_fixed_ext(xxti_f, xusbxti_f);
> +
> +	s5pc100_clk_register_finpll(xom);
> +
> +	/* Register PLLs. */
> +	samsung_clk_register_pll(s5pc100_pll_clks,
> +				ARRAY_SIZE(s5pc100_pll_clks), reg_base);
> +
> +	samsung_clk_register_fixed_rate(s5pc100_fixed_rate_clks,
> +			ARRAY_SIZE(s5pc100_fixed_rate_clks));
> +
> +	samsung_clk_register_mux(s5pc100_mux_clks,
> +			ARRAY_SIZE(s5pc100_mux_clks));
> +
> +	samsung_clk_register_div(s5pc100_div_clks,
> +			ARRAY_SIZE(s5pc100_div_clks));
> +
> +	samsung_clk_register_gate(s5pc100_gate_clks,
> +			ARRAY_SIZE(s5pc100_gate_clks));
> +
> +	samsung_clk_register_alias(s5pc100_clock_aliases,
> +			ARRAY_SIZE(s5pc100_clock_aliases));
> +
> +	pr_info("S5PC100 clocks: mout_apll = %ld, mout_mpll = %ld\n"
> +		"\tmout_epll = %ld, mout_hpll = %ld\n",
> +		_get_rate("mout_apll"), _get_rate("mout_mpll"),
> +		_get_rate("mout_epll"), _get_rate("mout_hpll"));
> +		pr_info("CLK_SRC1: %#x\n", readl(S5P_CLK_SRC1));
> +}

nit: A blank line would be nice here.

> +static void __init s5pc100_clk_dt_init(struct device_node *np)
> +{
> +	s5pc100_clk_init(np, 0, 0, NULL);
> +}
> +CLK_OF_DECLARE(s5pc100_clk, "samsung,s5pc100-clock",
> s5pc100_clk_dt_init); diff --git
> a/include/dt-bindings/clock/samsung,s5pc100-clock.h
> b/include/dt-bindings/clock/samsung,s5pc100-clock.h new file mode 100644
> index 0000000..360b9e7
> --- /dev/null
> +++ b/include/dt-bindings/clock/samsung,s5pc100-clock.h
> @@ -0,0 +1,202 @@
> +/*
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + * Author: Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Device Tree binding constants for Samsung S5PC100 clock controller.
> +*/
> +
> +#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S5PC100_CLOCK_H
> +#define _DT_BINDINGS_CLOCK_SAMSUNG_S5PC100_CLOCK_H
> +
> +
> +

nit: Two stray blank lines.

> +/* Core clocks. */
> +#define FIN_PLL		1
> +#define	FOUT_APLL	2
> +#define	FOUT_MPLL	3
> +#define	FOUT_EPLL	4
> +#define	FOUT_HPLL	5
> +
> +#define	MOUT_ONENAND	6
> +#define	MOUT_HREF	7
> +#define	MOUT_AM	8
> +#define	MOUT_HPLL	9
> +#define	MOUT_EPLL	10
> +#define	MOUT_MPLL	11
> +#define	MOUT_APLL	12
> +
> +#define	MOUT_48M	13
> +#define	MOUT_UHOST	14
> +#define	MOUT_IRDA	15
> +#define	MOUT_SPI2	15
> +#define	MOUT_SPI0	16
> +#define	MOUT_SPI1	17
> +#define	MOUT_UART	18
> +
> +#define	MOUT_MIXER	19
> +#define	MOUT_FIMC2	20
> +#define	MOUT_FIMC1	21
> +#define	MOUT_FIMC0	22
> +#define	MOUT_LCD	23
> +#define	MOUT_MMC2	24
> +#define	MOUT_MMC1	25
> +#define	MOUT_MMC0	26
> +
> +#define	MOUT_SPDIF	27
> +#define	MOUT_AUDIO2	28
> +#define	MOUT_AUDIO1	29
> +#define	MOUT_AUDIO0	30
> +#define	MOUT_I2S_2	31
> +#define	MOUT_HCLK_D2	32
> +#define	MOUT_PWI	33
> +
> +#define	DOUT_SECSS	34
> +#define	DOUT_PCLK0	35
> +#define	DOUT_D0_BUS	36
> +#define	DOUT_ARM	37
> +#define	DOUT_APLL	38
> +#define	DOUT_CAM	39
> +#define	DOUT_ONENAND	40
> +#define	DOUT_PCLK1	41
> +#define	DOUT_D1_BUS	42
> +#define	DOUT_MPLL2	43
> +#define	DOUT_MPLL	44
> +#define	DOUT_APLL2	45
> +#define	DOUT_UHOST	46
> +#define	DOUT_IRDA	47
> +#define	DOUT_SPI2	48
> +#define	DOUT_SPI1	49
> +#define	DOUT_SPI0	50
> +#define	DOUT_UART	51
> +#define	DOUT_HDMI	52
> +#define	DOUT_FIMC2	53
> +#define	DOUT_FIMC1	54
> +#define	DOUT_FIMC0	55
> +#define	DOUT_LCD	56
> +#define	DOUT_MMC2	57
> +#define	DOUT_MMC1	58
> +#define	DOUT_MMC0	59
> +#define	DOUT_AUDIO2	60
> +#define	DOUT_AUDIO1	61
> +#define	DOUT_AUDIO0	62
> +#define	DOUT_I2S_2	63
> +#define	DOUT_HCLK_2	64
> +#define	DOUT_PWI	65
> +
> +#define	CSSYS	65
> +#define	SECSS	66
> +#define	G2D	67
> +#define	MDMA	68
> +#define	CFCON	69
> +#define	TZIC	70
> +#define	INTC	71
> +#define	EBI	72
> +#define	INTMEM	73
> +#define	CSI	74
> +#define	NFCON	75
> +#define	ONENAND	76
> +#define	SROMC	77
> +#define	DMC	78
> +#define	SDM	79
> +#define	SECKEY	80
> +#define	HSMMC2	81
> +#define	HSMMC1	82
> +#define	HSMMC0	83
> +#define	MODEMIF	84
> +#define	USB_OTG	85
> +#define	USB_HOST	86
> +#define	PDMA1	87
> +#define	PDMA0	88
> +#define	G3D	89
> +#define	DSIM	90
> +#define	JPEG	91
> +#define	FIMC2	92
> +#define	FIMC1	93
> +#define	FIMC0	94
> +#define	ROTATOR	95
> +#define	LCDCON	96
> +#define	MFC	97
> +#define	HDMI	98
> +#define	MIXER	99
> +#define	VP	100
> +#define	TV	101
> +#define	RTC	102
> +#define	WDT	103
> +#define	SYSTIMER	104
> +#define	PWM	105
> +#define	IEC	106
> +#define	APC	107
> +#define	GPIO	108
> +#define	CHIPID	109
> +#define	HSIRX	110
> +#define	HSITX	111
> +#define	CCAN1	112
> +#define	CCAN0	113
> +#define	IRDA	114
> +#define	SPI2	115
> +#define	SPI1	116
> +#define	SPI0	117
> +#define	I2C_2	118
> +#define	I2C_HDMI	119
> +#define	I2C	120
> +#define	UART3	121
> +#define	UART2	122
> +#define	UART1	123
> +#define	UART0	124
> +#define	KEYIF	125
> +#define	TSADC	126
> +#define	SPDIF	127
> +#define	PCM1	128
> +#define	PCM0	129
> +#define	AC97	130
> +#define	I2S2	131
> +#define	I2S1	132
> +#define	I2S0	133
> +#define	I2S_2	134
> +#define	HCLK_2	135
> +#define	TSI	136
> +#define	JTAG	137
> +#define	CORESIGHT	138
> +/* Special clock */
> +#define	SCLK_MMC2_48	138
> +#define	SCLK_MMC1_48	139
> +#define	SCLK_MMC0_48	140
> +#define	SCLK_MMC2	141
> +#define	SCLK_MMC1	142
> +#define	SCLK_MMC0	143
> +#define	SCLK_USBHOST	144
> +#define	SCLK_IRDA	145
> +#define	SCLK_SPI2_48	146
> +#define	SCLK_SPI1_48	147
> +#define	SCLK_SPI0_48	148
> +#define	SCLK_SPI2	149
> +#define	SCLK_SPI1	150
> +#define	SCLK_SPI0	151
> +#define	SCLK_UART	152
> +#define	SCLK_ONENAND	153
> +#define	SCLK_PWI	154
> +#define	SCLK_HPM	155
> +
> +#define	SCLK_CAM	157
> +#define	SCLK_SPDIF	158
> +#define	SCLK_AUDIO2	159
> +#define	SCLK_AUDIO1	160
> +#define	SCLK_AUDIO0	161
> +#define	SCLK_HDMI	162
> +#define	SCLK_MIXER	163
> +#define	SCLK_VDAC54	164
> +#define	SCLK_TV54	165
> +#define	SCLK_FIMC2	166
> +#define	SCLK_FIMC1	167
> +#define	SCLK_FIMC0	168
> +#define	SCLK_LCD	169
> +#define	DACPHY	170

Coding style: A lot of tabs after #define.

Best regards,
Tomasz

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux