Re: [PATCH 1/4] pinctrl: Add s5pv210 support to pinctrl-exynos

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/27/2013 11:30 AM, Sylwester Nawrocki wrote:
Hi,

Just a few nits...

On 08/27/2013 11:19 AM, Mateusz Krawczuk wrote:
This patch implements pinctrl for s5pv210 and adds required device tree bindings.
Would be good to wrap this to not exceed 80 columns.

Signed-off-by: Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
---
[...]
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index a74b3cb..fc3e1d7 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -660,6 +660,64 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
  			exynos_pinctrl_resume_bank(drvdata, bank);
  }
+/* pin banks of s5pv210 pin-controller */
+static struct samsung_pin_bank s5pv210_pin_banks0[] = {
Couldn't it be 'static const' ?
Using static const cause warning: initialization discards ‘const’ qualifier from pointer target type

+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
+	EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18),
+	EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c),
How about consistently using lower case for the hex numbers ?
Thanks, I will use lower case.

--
Thanks,
Sylwester

Best regards,
Mateusz
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux