Since the _get_rate() helper has been modified to use __clk_lookup()
internally, checking of PLL input rates can be done using it and so the
registration code can be simplified.
Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
drivers/clk/samsung/clk-exynos5250.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index a9916a4..00a80e4 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -543,8 +543,6 @@ static struct of_device_id ext_clk_match[] __initdata = {
static void __init exynos5250_clk_init(struct device_node *np)
{
void __iomem *reg_base;
- struct clk *vpllsrc;
- unsigned long fin_pll_rate, mout_vpllsrc_rate = 0;
if (np) {
reg_base = of_iomap(np, 0);
@@ -563,16 +561,10 @@ static void __init exynos5250_clk_init(struct device_node *np)
samsung_clk_register_mux(exynos5250_pll_pmux_clks,
ARRAY_SIZE(exynos5250_pll_pmux_clks));
- fin_pll_rate = _get_rate("fin_pll");
-
- if (fin_pll_rate == 24 * MHZ)
+ if (_get_rate("fin_pll") == 24 * MHZ)
exynos5250_plls[epll].rate_table = epll_24mhz_tbl;
- vpllsrc = __clk_lookup("mout_vpllsrc");
- if (vpllsrc)
- mout_vpllsrc_rate = clk_get_rate(vpllsrc);
-
- if (mout_vpllsrc_rate == 24 * MHZ)
+ if (_get_rate("mout_vpllsrc") == 24 * MHZ)
exynos5250_plls[vpll].rate_table = vpll_24mhz_tbl;
samsung_clk_register_pll(exynos5250_plls, ARRAY_SIZE(exynos5250_plls),
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
