Re: [PATCH 4/8] ARM: dts: Add dwmmc DT nodes for exynos5420 SOC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 21, 2013 at 3:40 PM, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
> Hi Yuvaraj,
>
> On Wednesday 21 of August 2013 12:05:33 Yuvaraj Kumar C D wrote:
>> This patch adds the device tree node entries for exynos5420 SOC.
>> Exynos5420 has a different version of DWMMC controller,so a new
>> compatible string is used to distinguish it from the prior SOC's.
>
> Is this patch a v3 of [1]?
>
> [1] - http://thread.gmane.org/gmane.linux.kernel.mmc/21981
>
> Why it is named patch 4/8?
>
Please ignore this patch. patch 4/8 was accidental.

>> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/mmc/exynos-dw-mshc.txt     |    2 +
>>  arch/arm/boot/dts/exynos5420-smdk5420.dts          |   41
>> ++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi
>> |   33 ++++++++++++++++ 3 files changed, 76 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index
>> 6d1c098..84cd56f 100644
>> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
>> @@ -16,6 +16,8 @@ Required Properties:
>>         specific extensions.
>>       - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
>> specific extensions.
>> +     - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
>> +       specific extensions.
>>
>>  * samsung,dw-mshc-ciu-div: Specifies the divider value for the card
>> interface unit (ciu) clock. This property is applicable only for Exynos5
>> SoC's and diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 08607df..4530700
>> 100644
>> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
>> @@ -30,4 +30,45 @@
>>                       clock-frequency = <24000000>;
>>               };
>>       };
>> +
>> +     dwmmc0@12200000 {
>> +             num-slots = <1>;
>> +             broken-cd;
>> +             bypass-smu;
>> +             supports-highspeed;
>> +             fifo-depth = <0x80>;
>> +             card-detect-delay = <200>;
>> +             samsung,dw-mshc-ciu-div = <3>;
>> +             samsung,dw-mshc-sdr-timing = <0 4>;
>> +             samsung,dw-mshc-ddr-timing = <0 2>;
>> +             pinctrl-names = "default";
>> +             pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
>
> See below.
>
>> +
>> +             slot@0 {
>> +                     reg = <0>;
>> +                     bus-width = <8>;
>> +             };
>> +     };
>> +
>> +     dwmmc1@12210000 {
>> +             status = "disabled";
>
> You should rather keep things the other way around. A board dts shouldn't
> care about peripherals it doesn't use, so any peripheral requiring board-
> specific data in its node should have status set as "disabled" at top level
> and then overridden to "okay" at level in which it has all the required
> properties to operate (in board dts in this case).
>
>> +     };
>> +
>> +     dwmmc2@12220000 {
>> +             num-slots = <1>;
>> +             supports-highspeed;
>> +             fifo-depth = <0x80>;
>> +             card-detect-delay = <200>;
>> +             samsung,dw-mshc-ciu-div = <3>;
>> +             samsung,dw-mshc-sdr-timing = <2 3>;
>> +             samsung,dw-mshc-ddr-timing = <1 2>;
>> +             pinctrl-names = "default";
>> +             pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>
> Here would go status = "okay".
>
>> +
>> +             slot@0 {
>> +                     reg = <0>;
>> +                     bus-width = <4>;
>> +             };
>> +     };
>> +
>>  };
>> diff --git a/arch/arm/boot/dts/exynos5420.dtsi
>> b/arch/arm/boot/dts/exynos5420.dtsi index 9e90d1e..8559aa8 100644
>> --- a/arch/arm/boot/dts/exynos5420.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420.dtsi
>> @@ -19,6 +19,9 @@
>>       compatible = "samsung,exynos5420";
>>
>>       aliases {
>> +             mshc0 = &dwmmc_0;
>> +             mshc1 = &dwmmc_1;
>> +             mshc2 = &dwmmc_2;
>>               pinctrl0 = &pinctrl_0;
>>               pinctrl1 = &pinctrl_1;
>>               pinctrl2 = &pinctrl_2;
>> @@ -65,6 +68,36 @@
>>               #clock-cells = <1>;
>>       };
>>
>> +     dwmmc_0: dwmmc0@12200000 {
>> +             compatible = "samsung,exynos5420-dw-mshc";
>> +             interrupts = <0 75 0>;
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +             reg = <0x12200000 0x2000>;
>> +             clocks = <&clock 351>, <&clock 132>;
>> +             clock-names = "biu", "ciu";
>
> Here would go status = "disabled" in this case.
>
>> +     };
>> +
>> +     dwmmc_1: dwmmc1@12210000 {
>> +             compatible = "samsung,exynos5420-dw-mshc";
>> +             interrupts = <0 76 0>;
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +             reg = <0x12210000 0x2000>;
>> +             clocks = <&clock 352>, <&clock 133>;
>> +             clock-names = "biu", "ciu";
>
> ...
>
>> +     };
>> +
>> +     dwmmc_2: dwmmc2@12220000 {
>> +             compatible = "samsung,exynos5420-dw-mshc";
>> +             interrupts = <0 77 0>;
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +             reg = <0x12220000 0x2000>;
>> +             clocks = <&clock 353>, <&clock 134>;
>> +             clock-names = "biu", "ciu";
>
> ...
>
> Best regards,
> Tomasz
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux