Cc: Pawel, Kumar On 08/16/2013 11:20 AM, Arun Kumar K wrote: > The patch adds the DT binding documentation for Samsung > Exynos5 SoC series imaging subsystem (FIMC-IS). > > Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx> > Reviewed-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> > --- > .../devicetree/bindings/media/exynos5-fimc-is.txt | 47 ++++++++++++++++++++ > 1 file changed, 47 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt > > diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt > new file mode 100644 > index 0000000..bc279b4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt > @@ -0,0 +1,47 @@ > +Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS) > +------------------------------------------------------ > + > +The camera subsystem on Samsung Exynos5 SoC has some changes relative > +to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and > +FIMC-LITE IPs but has a much improved version of FIMC-IS which can > +handle sensor controls and camera post-processing operations. The > +Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many > +post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two > +dedicated scalers (SCC and SCP). > + > +fimc-is node > +------------ > + > +Required properties: > + > +- compatible : must be "samsung,exynos5250-fimc-is" > +- reg : physical base address and size of the memory mapped > + registers > +- interrupt-parent : parent interrupt controller > +- interrupts : fimc-is interrupt to the parent interrupt controller > +- clocks : list of clock specifiers, corresponding to entries in > + clock-names property; > +- clock-names : must contain "isp", "mcu_isp", "isp_div0", "isp_div1", > + "isp_divmpwm", "mcu_isp_div0", "mcu_isp_div1" entries, > + matching entries in the clocks property. > +- samsung,pmu : phandle to the fimc-is pmu node describing the register > + base and size for FIMC-IS PMU. As this is a phandle to the whole SoC Power Management Unit I would amend this to something like: - samsung,pmu : phandle to the Power Management Unit (PMU) node. > + > +i2c-isp (ISP I2C bus controller) nodes > +------------------------------------------ > + > +Required properties: > + > +- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212, > + Exynos4412 and Exynos5250 SoCs; > +- reg : physical base address and length of the registers set; > +- clocks : must contain gate clock specifier for this controller; > +- clock-names : must contain "i2c_isp" entry. > + > +For the i2c-isp node, it is required to specify a pinctrl state named "default", > +according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt. > + > +Device tree nodes of the image sensors controlled directly by the FIMC-IS > +firmware must be child nodes of their corresponding ISP I2C bus controller node. > +The data link of these image sensors must be specified using the common video > +interfaces bindings, defined in video-interfaces.txt. Thanks, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |