On Friday 16 of August 2013 14:02:03 Mike Turquette wrote: > Quoting Tomasz Figa (2013-08-16 03:44:44) > > > Hi Mike, > > > > On Monday 05 of August 2013 11:06:25 Mike Turquette wrote: > > > Quoting Kukjin Kim (2013-08-05 10:01:36) > > > > > > > On 07/23/13 08:49, Tomasz Figa wrote: > > > > > This series is an attempt to move clock support on Samsung > > > > > S3C64xx > > > > > SoCs > > > > > to Common Clock Framework. > > > > > > > > > > First, support for PLL types present on S3C64xx SoCs is added to > > > > > Samsung > > > > > Common Clock Framework driver. Then the main clock driver for > > > > > mentioned > > > > > SoCs is introduced. Further patches contain fixes for drivers to > > > > > make > > > > > them compliant with CCF semantics, migration of platform code to > > > > > use > > > > > the new clock driver and removal of old clock management code. > > > > > > > > > > Depends on: > > > > > - [PATCH v4 00/20] Samsung PWM support cleanup > > > > > > > > > > http://thread.gmane.org/gmane.linux.kernel.samsung-soc/20856 > > > > > > > > > > On S3C6410-based Tiny6410 board (Mini6410-compatible): > > > > > > > > > > Tested-by: Tomasz Figa<tomasz.figa@xxxxxxxxx> > > > > > > > > > > For v1: > > > > > > > > > > Acked-by: Mike Turquette<mturquette@xxxxxxxxxx> > > > > > > > > > > Changes since v1: > > > > > - added patch for read-only muxes, > > > > > - exported configurable muxes and dividers, > > > > > - defined mout_syncmux as read-only mux, > > > > > - in DT-enabled case fixed-clock binding is used to define > > > > > external > > > > > clocks.> > > > > > > > > > > > Tomasz Figa (8): > > > > > clk: mux: Add support for read-only muxes. > > > > > clk: samsung: pll: Add support for PLL6552 and PLL6553 > > > > > clk: samsung: Add clock driver for S3C64xx SoCs > > > > > ARM: SAMSUNG: Add soc_is_s3c6400/s3c6410 macros > > > > > ARM: s3c64xx: dma: Use > > > > > clk_prepare_enable/clk_disable_unprepare > > > > > usb: host: ohci-s3c2410 Use > > > > > clk_prepare_enable/clk_disable_unprepare > > > > > ARM: s3c64xx: Migrate clock handling to Common Clock > > > > > Framework > > > > > ARM: s3c64xx: Remove old clock management code > > > > > > > > > > .../bindings/clock/samsung,s3c64xx-clock.txt | 77 ++ > > > > > arch/arm/Kconfig | 2 +- > > > > > arch/arm/mach-s3c64xx/Makefile | 2 +- > > > > > arch/arm/mach-s3c64xx/clock.c | 1007 > > > > > -------------------- arch/arm/mach-s3c64xx/common.c > > > > > > > > > > | 21 +- > > > > > > > > > > arch/arm/mach-s3c64xx/common.h | 12 +- > > > > > arch/arm/mach-s3c64xx/dma.c | 4 +- > > > > > arch/arm/mach-s3c64xx/include/mach/regs-clock.h | 132 +-- > > > > > arch/arm/mach-s3c64xx/mach-anw6410.c | 2 +- > > > > > arch/arm/mach-s3c64xx/mach-crag6410.c | 2 +- > > > > > arch/arm/mach-s3c64xx/mach-hmt.c | 2 +- > > > > > arch/arm/mach-s3c64xx/mach-mini6410.c | 2 +- > > > > > arch/arm/mach-s3c64xx/mach-ncp.c | 2 +- > > > > > arch/arm/mach-s3c64xx/mach-smartq.c | 11 +- > > > > > arch/arm/mach-s3c64xx/mach-smdk6400.c | 2 +- > > > > > arch/arm/mach-s3c64xx/mach-smdk6410.c | 2 +- > > > > > arch/arm/mach-s3c64xx/pm.c | 21 - > > > > > arch/arm/mach-s3c64xx/s3c6400.c | 6 - > > > > > arch/arm/mach-s3c64xx/s3c6410.c | 7 - > > > > > arch/arm/plat-samsung/include/plat/cpu.h | 4 + > > > > > drivers/clk/clk-mux.c | 10 +- > > > > > drivers/clk/samsung/Makefile | 1 + > > > > > drivers/clk/samsung/clk-pll.c | 160 ++++ > > > > > drivers/clk/samsung/clk-pll.h | 4 + > > > > > drivers/clk/samsung/clk-s3c64xx.c | 465 > > > > > +++++++++ > > > > > drivers/usb/host/ohci-s3c2410.c | 8 +- > > > > > include/dt-bindings/clock/samsung,s3c64xx-clock.h | 178 ++++ > > > > > include/linux/clk-provider.h | 2 + > > > > > 28 files changed, 943 insertions(+), 1205 deletions(-) > > > > > create mode 100644 > > > > > Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock. > > > > > txt > > > > > delete mode 100644 arch/arm/mach-s3c64xx/clock.c > > > > > create mode 100644 drivers/clk/samsung/clk-s3c64xx.c > > > > > create mode 100644 > > > > > include/dt-bindings/clock/samsung,s3c64xx-clock.h > > > > > > > > Basically, this series looks good to me, but I'm not sure how this > > > > should be handled because of dependency with PWM cleanup and clk > > > > stuff > > > > in clk tree now... > > > > > > Patches 1-3 can go into the clk tree. 4-6 should go through their > > > respective trees. > > > > It looks like version 2 of patch 2/8 has been applied by mistake, > > breaking compilation (and operation) of the clock driver added in > > patch 3/8. > Ugh. My mistake. Happens. Thanks for fast response. > > Could you please fix this up? Thanks in advance. > > This is a little tricky since I published the clk-next-s3c64xx branch as > a stable branch for Samsung which I think has been merged to the > Samsung tree already. Right, this somewhat limits our options. Although I'm not really sure whether Kukjin already has pushed it to his public tree. > So what are the options? > > One option is to create a fixup patch that just manages the delta > between V2 and V3. I can then add this to the top of clk-next-s3c64xx > and re-merge it into clk-next. Then the Samsung tree will need to > re-merge that dependency branch. Well, I can make a "convert PLL65xx to new registration method" patch, that would be basically the delta. If this could be merged before patch 7/8, no regression would be introduced. > Do you have a better idea? Not really. Maybe let's ask Kukjin whether he has already merged it to his tree. Kukjin, have you? Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |