> -----Original Message----- > From: Bartlomiej Zolnierkiewicz [mailto:b.zolnierkie@xxxxxxxxxxx] > Sent: Saturday, August 03, 2013 2:14 AM > > Hi, > > On Friday, July 26, 2013 08:28:19 PM Cho KyongHo wrote: > > Signed-off-by: Cho KyongHo <pullip.cho@xxxxxxxxxxx> > > --- > > .../bindings/iommu/samsung,exynos4210-sysmmu.txt | 103 +++++++ > > arch/arm/boot/dts/exynos4.dtsi | 122 ++++++++ > > arch/arm/boot/dts/exynos4210.dtsi | 25 ++ > > arch/arm/boot/dts/exynos4x12.dtsi | 76 +++++ > > arch/arm/boot/dts/exynos5250.dtsi | 291 ++++++++++++++++++++ > > 5 files changed, 617 insertions(+), 0 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt > > > > diff --git a/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt > > b/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt > > new file mode 100644 > > index 0000000..92f0a33 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iommu/samsung,exynos4210-sysmmu.txt > > @@ -0,0 +1,103 @@ > > +Samsung Exynos4210 IOMMU H/W, System MMU (System Memory Management Unit) > > + > > +Samsung's Exynos architecture contains System MMU that enables scattered > > +physical memory chunks visible as a contiguous region to DMA-capable peripheral > > +devices like MFC, FIMC, FIMD, GScaler, FIMC-IS and so forth. > > + > > +System MMU is a sort of IOMMU and support identical translation table format to > > +ARMv7 translation tables with minimum set of page properties including access > > +permissions, shareability and security protection. In addition, System MMU has > > +another capabilities like L2 TLB or block-fetch buffers to minimize translation > > +latency. > > + > > +A System MMU is dedicated to a single master peripheral device. Thus, it is > > +important to specify the correct System MMU in the device node of its master > > +device. Whereas a System MMU is dedicated to a master device, the master device > > +may have more than one System MMU. > > + > > +Required properties: > > +- compatible: Should be "samsung,exynos4210-sysmmu" > > +- reg: A tuple of base address and size of System MMU registers. > > +- interrupt-parent: The phandle of the interrupt controller of System MMU > > +- interrupts: A tuple of numbers that indicates the interrupt source. > > +- clock-names: Should be "sysmmu" if the System MMU is needed to gate its clock. > > + Please refer to the following documents: > > + Documentation/devicetree/bindings/clock/clock-bindings.txt > > + Documentation/devicetree/bindings/clock/exynos4-clock.txt > > + Documentation/devicetree/bindings/clock/exynos5250-clock.txt > > + Optional "master" if the clock to the System MMU is gated by > > + another gate clock other than "sysmmu". The System MMU driver > > + sets "master" the parent of "sysmmu". > > + Exynos4 SoCs, there needs no "master" clocks. > > + Exynos5 SoCs, some System MMUs must have "master" clocks. > > +- clocks: Required if the System MMU is needed to gate its clock. > > + Please refer to the documents listed above. > > +- samsung,power-domain: Required if the System MMU is needed to gate its power. > > + Please refer to the following document: > > + Documentation/devicetree/bindings/arm/exynos/power_domain.txt > > + > > +Required properties for the master peripheral devices: > > +- iommu: phandles to the System MMUs of the device > > + > > +Examples: > > +A System MMU is dedicated to a single master device. > > + gsc_0: gsc@0x13e00000 { > > + compatible = "samsung,exynos5-gsc"; > > + reg = <0x13e00000 0x1000>; > > + interrupts = <0 85 0>; > > + samsung,power-domain = <&pd_gsc>; > > + clocks = <&clock 256>; > > + clock-names = "gscl"; > > + iommu = <&sysmmu_gsc1>; > > + }; > > + > > + sysmmu_gsc0: sysmmu@13E80000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13E80000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-gsc0"; > > + interrupts = <2 0>; > > + clock-names = "sysmmu", "master"; > > + clocks = <&clock 262>, <&clock 256>; > > + samsung,power-domain = <&pd_gsc>; > > + status = "ok"; > > + }; > > + > > +MFC has 2 System MMUs for each port that MFC is attached. Thus it seems natural > > +to define 2 System MMUs for each port of the MFC: > > Marek Szyprowski (added to cc:) has a patch fixing MFC to create separate > mfc_l and mfc_r devices (like it was in the past). Using this patch it > would be possible to bind sysmmu_mfc_l to mfc_l device and sysmmu_mfc_r to > mfc_r device. This probably also requires adding some MFC specific handling > in a device tree node and to the new master's device PM ops (in patch #10) > as previously (in our trees) sysmmu_mfc r device was set as parent of > sysmmu_mfc_l device which in turn was a parent for main MFC device (to make > runtime Power Management work). However because MFC is the only device > requiring use of multiple System MMUs above changes would allow us (unless > I'm missing something?) to use just one System MMU device per struct > exynos_iommu_client instance (making driver a lot simpler). > Does it mean that we can make the exynos-iommu driver simpler with Marek Szyprowski's patch? It is welcome but I don't think it covers all topologies of System MMU and master H/W. Those are getting more complex. > > + mfc: codec@13400000 { > > + compatible = "samsung,mfc-v5"; > > + reg = <0x13400000 0x10000>; > > + interrupts = <0 94 0>; > > + samsung,power-domain = <&pd_mfc>; > > + clocks = <&clock 170>, <&clock 273>; > > + clock-names = "sclk_mfc", "mfc"; > > + status = "ok"; > > + iommu = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; > > + }; > > + > > + sysmmu_mfc_l: sysmmu@13620000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13620000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-mfc-l"; > > + interrupts = <5 5>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 274>; > > + samsung,power-domain = <&pd_mfc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_mfc_r: sysmmu@13630000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13630000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-mfc-r"; > > + interrupts = <5 6>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 275>; > > + samsung,power-domain = <&pd_mfc>; > > + status = "ok"; > > + }; > > + > > diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi > > index 359694c..ba74ee8 100644 > > --- a/arch/arm/boot/dts/exynos4.dtsi > > +++ b/arch/arm/boot/dts/exynos4.dtsi > > @@ -161,6 +161,7 @@ > > interrupts = <0 94 0>; > > samsung,power-domain = <&pd_mfc>; > > status = "disabled"; > > + iommu = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; > > }; > > > > serial@13800000 { > > @@ -395,5 +396,126 @@ > > clock-names = "sclk_fimd", "fimd"; > > samsung,power-domain = <&pd_lcd0>; > > status = "disabled"; > > + iommu = <&sysmmu_fimd0>; > > + }; > > + > > + sysmmu_mfc_l: sysmmu@13620000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13620000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-mfc-l"; > > + interrupts = <5 5>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 274>; > > + samsung,power-domain = <&pd_mfc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_mfc_r: sysmmu@13630000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13630000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-mfc-r"; > > + interrupts = <5 6>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 275>; > > + samsung,power-domain = <&pd_mfc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_tv: sysmmu@13E20000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13E20000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-tv"; > > + interrupts = <5 4>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 272>; > > + samsung,power-domain = <&pd_tv>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc0: sysmmu@11A20000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x11A20000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc0"; > > + interrupts = <4 2>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 263>; > > + samsung,power-domain = <&pd_cam>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc1: sysmmu@11A30000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x11A30000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc1"; > > + interrupts = <4 3>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 264>; > > + samsung,power-domain = <&pd_cam>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc2: sysmmu@11A40000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x11A40000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc2"; > > + interrupts = <4 4>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 265>; > > + samsung,power-domain = <&pd_cam>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc3: sysmmu@11A50000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x11A50000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc3"; > > + interrupts = <4 5>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 266>; > > + samsung,power-domain = <&pd_cam>; > > + status = "ok"; > > + }; > > + > > + sysmmu_jpeg: sysmmu@11A60000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x11A60000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-jpeg"; > > + interrupts = <4 6>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 267>; > > + samsung,power-domain = <&pd_cam>; > > + status = "ok"; > > + }; > > + > > + sysmmu_rotator: sysmmu@12A30000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x12A30000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-rotator"; > > + interrupts = <5 0>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 281>; > > + samsung,power-domain = <&pd_lcd0>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimd0: sysmmu@11E20000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x11E20000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimd0"; > > + interrupts = <5 2>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 287>; > > + samsung,power-domain = <&pd_lcd0>; > > + status = "ok"; > > }; > > }; > > diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi > > index 54710de..09b13da 100644 > > --- a/arch/arm/boot/dts/exynos4210.dtsi > > +++ b/arch/arm/boot/dts/exynos4210.dtsi > > @@ -119,5 +119,30 @@ > > reg = <0x12800000 0x1000>; > > interrupts = <0 89 0>; > > status = "disabled"; > > + iommu = <&sysmmu_g2d>; > > + }; > > + > > + sysmmu_g2d: sysmmu@12A20000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x12A20000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-g2d"; > > + interrupts = <4 7>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 280>; > > + samsung,power-domain = <&pd_lcd0>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimd1: sysmmu@12220000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimd1"; > > + reg = <0x12220000 0x1000>; > > + interrupts = <5 3>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 291>; > > + samsung,power-domain = <&pd_lcd1>; > > + status = "ok"; > > }; > > }; > > diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi > > index e3380a7..681db32 100644 > > --- a/arch/arm/boot/dts/exynos4x12.dtsi > > +++ b/arch/arm/boot/dts/exynos4x12.dtsi > > @@ -79,4 +79,80 @@ > > interrupts = <0 89 0>; > > status = "disabled"; > > }; > > + > > + sysmmu_g2d: sysmmu@10A40000{ > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x10A40000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-g2d"; > > + interrupts = <4 7>; > > + clock-names = "sysmmu"; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_isp: sysmmu@12260000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x12260000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_isp"; > > + interrupts = <16 2>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 362>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_drc: sysmmu@12270000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x12270000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_drc"; > > + interrupts = <16 3>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 363>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_fd: sysmmu@122A0000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x122A0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_fd"; > > + interrupts = <16 4>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 364>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_mcuctl: sysmmu@122B0000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x122B0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_mcuctl"; > > + interrupts = <16 5>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 376>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_lite0: sysmmu@123B0000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x123B0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_lite0"; > > + interrupts = <16 0>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 366>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_lite1: sysmmu@123C0000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x123C0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_lite1"; > > + interrupts = <16 1>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 365>; > > + status = "ok"; > > + }; > > }; > > diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi > > index fc9fb3d..130d23d 100644 > > --- a/arch/arm/boot/dts/exynos5250.dtsi > > +++ b/arch/arm/boot/dts/exynos5250.dtsi > > @@ -66,6 +66,16 @@ > > reg = <0x10044040 0x20>; > > }; > > > > + pd_isp: mfc-power-domain@0x10044020 { > > + compatible = "samsung,exynos4210-pd"; > > + reg = <0x10044020 0x20>; > > + }; > > + > > + pd_disp1: mfc-power-domain@0x100440A0 { > > + compatible = "samsung,exynos4210-pd"; > > + reg = <0x100440A0 0x20>; > > + }; > > + > > clock: clock-controller@0x10010000 { > > compatible = "samsung,exynos5250-clock"; > > reg = <0x10010000 0x30000>; > > @@ -180,6 +190,7 @@ > > reg = <0x11000000 0x10000>; > > interrupts = <0 96 0>; > > samsung,power-domain = <&pd_mfc>; > > + iommu = <&sysmmu_mfc_l &sysmmu_mfc_l>; > > Shouldn't it be: > > iommu = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; > > ? Oh. yes you are right. Thanks. > > Best regards, > -- > Bartlomiej Zolnierkiewicz > Samsung R&D Institute Poland > Samsung Electronics > > > }; > > > > rtc { > > @@ -571,6 +582,7 @@ > > samsung,power-domain = <&pd_gsc>; > > clocks = <&clock 256>; > > clock-names = "gscl"; > > + iommu = <&sysmmu_gsc1>; > > }; > > > > gsc_1: gsc@0x13e10000 { > > @@ -580,6 +592,7 @@ > > samsung,power-domain = <&pd_gsc>; > > clocks = <&clock 257>; > > clock-names = "gscl"; > > + iommu = <&sysmmu_gsc1>; > > }; > > > > gsc_2: gsc@0x13e20000 { > > @@ -589,6 +602,7 @@ > > samsung,power-domain = <&pd_gsc>; > > clocks = <&clock 258>; > > clock-names = "gscl"; > > + iommu = <&sysmmu_gsc2>; > > }; > > > > gsc_3: gsc@0x13e30000 { > > @@ -598,6 +612,7 @@ > > samsung,power-domain = <&pd_gsc>; > > clocks = <&clock 259>; > > clock-names = "gscl"; > > + iommu = <&sysmmu_gsc3>; > > }; > > > > hdmi { > > @@ -614,6 +629,7 @@ > > compatible = "samsung,exynos5-mixer"; > > reg = <0x14450000 0x10000>; > > interrupts = <0 94 0>; > > + iommu = <&sysmmu_tv>; > > }; > > > > dp-controller { > > @@ -638,5 +654,280 @@ > > interrupts = <18 4>, <18 5>, <18 6>; > > clocks = <&clock 133>, <&clock 339>; > > clock-names = "sclk_fimd", "fimd"; > > + iommu = <&sysmmu_fimd1>; > > + }; > > + > > + sysmmu_mfc_l: sysmmu@11210000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x11210000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-mfc_l"; > > + interrupts = <8 5>; > > + clock-names = "sysmmu", "master"; > > + clocks = <&clock 267>, <&clock 266>; > > + samsung,power-domain = <&pd_mfc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_mfc_r: sysmmu@11200000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x11200000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-mfc_r"; > > + interrupts = <6 2>; > > + clock-names = "sysmmu", "master"; > > + clocks = <&clock 268>, <&clock 266>; > > + samsung,power-domain = <&pd_mfc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_tv: sysmmu@14650000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x14650000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-tv"; > > + interrupts = <7 4>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 349>; > > + samsung,power-domain = <&pd_disp1>; > > + status = "ok"; > > + }; > > + > > + sysmmu_gsc0: sysmmu@13E80000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13E80000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-gsc0"; > > + interrupts = <2 0>; > > + clock-names = "sysmmu", "master"; > > + clocks = <&clock 262>, <&clock 256>; > > + samsung,power-domain = <&pd_gsc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_gsc1: sysmmu@13E90000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13E90000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-gsc1"; > > + interrupts = <2 2>; > > + clock-names = "sysmmu", "master"; > > + clocks = <&clock 263>, <&clock 257>; > > + samsung,power-domain = <&pd_gsc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_gsc2: sysmmu@13EA0000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13EA0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-gsc2"; > > + interrupts = <2 4>; > > + clock-names = "sysmmu", "master"; > > + clocks = <&clock 264>, <&clock 258>; > > + samsung,power-domain = <&pd_gsc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_gsc3: sysmmu@13EB0000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13EB0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-gsc3"; > > + interrupts = <2 6>; > > + clock-names = "sysmmu", "master"; > > + clocks = <&clock 265>, <&clock 259>; > > + samsung,power-domain = <&pd_gsc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimd1: sysmmu@14640000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x14640000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimd1"; > > + interrupts = <3 2>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 350>; > > + samsung,power-domain = <&pd_disp1>; > > + status = "ok"; > > + }; > > + > > + sysmmu_rotator: sysmmu@11D40000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x11D40000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-rotator"; > > + interrupts = <4 0>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 272>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_isp: sysmmu@13260000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13260000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_isp"; > > + interrupts = <10 6>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 361>; > > + samsung,power-domain = <&pd_isp>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_drc: sysmmu@13270000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13270000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_drc"; > > + interrupts = <11 6>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 362>; > > + samsung,power-domain = <&pd_isp>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_fd: sysmmu@132A0000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x132A0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_fd"; > > + interrupts = <5 0>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 363>; > > + samsung,power-domain = <&pd_isp>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_scc: sysmmu@13280000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13280000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_scalerc"; > > + interrupts = <5 2>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 364>; > > + samsung,power-domain = <&pd_isp>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_scp: sysmmu@13290000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13290000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_scalerp"; > > + interrupts = <3 6>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 365>; > > + samsung,power-domain = <&pd_isp>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_mcuctl: sysmmu@132B0000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x132B0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_mcuctl"; > > + interrupts = <5 4>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 366>; > > + samsung,power-domain = <&pd_isp>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_odc: sysmmu@132C0000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x132C0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_odc"; > > + interrupts = <11 0>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 367>; > > + samsung,power-domain = <&pd_isp>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_dis0: sysmmu@132D0000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x132D0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_dis0"; > > + interrupts = <10 4>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 368>; > > + samsung,power-domain = <&pd_isp>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_dis1: sysmmu@132E0000{ > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x132E0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_dis1"; > > + interrupts = <9 4>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 369>; > > + samsung,power-domain = <&pd_isp>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_3dnr: sysmmu@132F0000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x132F0000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_3dnr"; > > + interrupts = <5 6>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 370>; > > + samsung,power-domain = <&pd_isp>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_lite0: sysmmu@13C40000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13C40000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_lite0"; > > + interrupts = <3 4>; > > + clock-names = "sysmmu", "master"; > > + clocks = <&clock 346>, <&clock 345>; > > + samsung,power-domain = <&pd_gsc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_lite1: sysmmu@13C50000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x13C50000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-fimc_lite1"; > > + interrupts = <24 1>; > > + clock-names = "sysmmu", "master"; > > + clocks = <&clock 347>, <&clock 345>; > > + samsung,power-domain = <&pd_gsc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_jpeg: sysmmu@11F20000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x11F20000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-jpeg"; > > + interrupts = <4 2>; > > + clock-names = "sysmmu", "master"; > > + clocks = <&clock 273>, <&clock 270>; > > + samsung,power-domain = <&pd_gsc>; > > + status = "ok"; > > + }; > > + > > + sysmmu_fimc_2d: sysmmu@10A60000 { > > + compatible = "samsung,exynos4210-sysmmu"; > > + reg = <0x10A60000 0x1000>; > > + interrupt-parent = <&combiner>; > > + interrupt-names = "sysmmu-2d"; > > + interrupts = <24 5>; > > + clock-names = "sysmmu"; > > + clocks = <&clock 361>; > > + status = "ok"; > > }; > > }; -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |