Tomasz Figa wrote: > > This series is an attempt to move clock support on Samsung S3C64xx SoCs > to Common Clock Framework. > > First, support for PLL types present on S3C64xx SoCs is added to Samsung > Common Clock Framework driver. Then the main clock driver for mentioned > SoCs is introduced. Further patches contain fixes for drivers to make them > compliant with CCF semantics, migration of platform code to use the new > clock driver and removal of old clock management code. > > Depends on: > - [PATCH v4 00/20] Samsung PWM support cleanup > http://thread.gmane.org/gmane.linux.kernel.samsung-soc/20856 > > On S3C6410-based Tiny6410 board (Mini6410-compatible): > > Tested-by: Tomasz Figa <tomasz.figa@xxxxxxxxx> > > For v1: > > Acked-by: Mike Turquette <mturquette@xxxxxxxxxx> > > Changes since v1: > - added patch for read-only muxes, > - exported configurable muxes and dividers, > - defined mout_syncmux as read-only mux, > - in DT-enabled case fixed-clock binding is used to define external > clocks. > > Tomasz Figa (8): > clk: mux: Add support for read-only muxes. > clk: samsung: pll: Add support for PLL6552 and PLL6553 > clk: samsung: Add clock driver for S3C64xx SoCs > ARM: SAMSUNG: Add soc_is_s3c6400/s3c6410 macros > ARM: s3c64xx: dma: Use clk_prepare_enable/clk_disable_unprepare > usb: host: ohci-s3c2410 Use clk_prepare_enable/clk_disable_unprepare > ARM: s3c64xx: Migrate clock handling to Common Clock Framework > ARM: s3c64xx: Remove old clock management code > > .../bindings/clock/samsung,s3c64xx-clock.txt | 77 ++ > arch/arm/Kconfig | 2 +- > arch/arm/mach-s3c64xx/Makefile | 2 +- > arch/arm/mach-s3c64xx/clock.c | 1007 -------------------- > arch/arm/mach-s3c64xx/common.c | 21 +- > arch/arm/mach-s3c64xx/common.h | 12 +- > arch/arm/mach-s3c64xx/dma.c | 4 +- > arch/arm/mach-s3c64xx/include/mach/regs-clock.h | 132 +-- > arch/arm/mach-s3c64xx/mach-anw6410.c | 2 +- > arch/arm/mach-s3c64xx/mach-crag6410.c | 2 +- > arch/arm/mach-s3c64xx/mach-hmt.c | 2 +- > arch/arm/mach-s3c64xx/mach-mini6410.c | 2 +- > arch/arm/mach-s3c64xx/mach-ncp.c | 2 +- > arch/arm/mach-s3c64xx/mach-smartq.c | 11 +- > arch/arm/mach-s3c64xx/mach-smdk6400.c | 2 +- > arch/arm/mach-s3c64xx/mach-smdk6410.c | 2 +- > arch/arm/mach-s3c64xx/pm.c | 21 - > arch/arm/mach-s3c64xx/s3c6400.c | 6 - > arch/arm/mach-s3c64xx/s3c6410.c | 7 - > arch/arm/plat-samsung/include/plat/cpu.h | 4 + > drivers/clk/clk-mux.c | 10 +- > drivers/clk/samsung/Makefile | 1 + > drivers/clk/samsung/clk-pll.c | 160 ++++ > drivers/clk/samsung/clk-pll.h | 4 + > drivers/clk/samsung/clk-s3c64xx.c | 465 +++++++++ > drivers/usb/host/ohci-s3c2410.c | 8 +- > include/dt-bindings/clock/samsung,s3c64xx-clock.h | 178 ++++ > include/linux/clk-provider.h | 2 + > 28 files changed, 943 insertions(+), 1205 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt > delete mode 100644 arch/arm/mach-s3c64xx/clock.c > create mode 100644 drivers/clk/samsung/clk-s3c64xx.c > create mode 100644 include/dt-bindings/clock/samsung,s3c64xx-clock.h > > -- > 1.8.3.2 Looks nice series, thanks. I've applied this whole series including updated v3 2nd and 3rd patches on top of PWM cleanup series. BTW, if I could get ack on 1st and 6th patches, would be helpful :-) Regards, Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |