On Wed, Jun 19, 2013 at 04:18:25PM +0530, Naveen Krishna Chatradhi wrote:
> Adds support for High Speed I2C driver found in Exynos5 and
> later SoCs from Samsung.
>
> Driver only supports Device Tree method.
>
> Changes since v1:
> 1. Added FIFO functionality
> 2. Added High speed mode functionality
> 3. Remove SMBUS_QUICK
> 4. Remove the debugfs functionality
> 5. Use devm_* functions where ever possible
> 6. Driver is free from GPIO configs
> 7. Use OF data string "clock-frequency" to get the bus operating frequencies
> 8. Split the clock divisor calculation function
> 9. Add resets for the failed transacton cases
> 10. Removed retries as core does retries if -EAGAIN is returned
> 11. Removed mode from device tree info (use speed to distinguish
> the mode of operation)
> 12. Use wait_for_completion_timeout as the interruptible case is not tested well
> 13. few other bug fixes and cosmetic changes
>
> Signed-off-by: Taekgyun Ko <taeggyun.ko@xxxxxxxxxxx>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
> Reviewed-by: Simon Glass <sjg@xxxxxxxxxx>
> Tested-by: Andrew Bresticker <abrestic@xxxxxxxxxx>
> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
> Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxx>
> ---
>
> +Optional properties:
> + - clock-frequency: Desired operating frequency in Hz of the bus.
> + -> If not specified, the default value is 100khz in fast-speed mode and
> + 1Mhz in high-speed mode.
? If not specified, the default is 100kHz. There is no way to get 1MHz,
or?
...
> +static int exynos5_i2c_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct exynos5_i2c *i2c;
> + struct resource *mem;
> + unsigned int op_clock;
My compiler says:
drivers/i2c/busses/i2c-exynos5.c: In function ‘exynos5_i2c_probe’:
drivers/i2c/busses/i2c-exynos5.c:687:5: warning: ‘op_clock’ may be used uninitialized in this function [-Wuninitialized]
so...
> + int ret;
> +
> + if (!np) {
> + dev_err(&pdev->dev, "no device node\n");
> + return -ENOENT;
> + }
> +
> + i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL);
> + if (!i2c) {
> + dev_err(&pdev->dev, "no memory for state\n");
> + return -ENOMEM;
> + }
> +
> + if (of_property_read_u32(np, "clock-frequency", &op_clock)) {
> + i2c->speed_mode = HSI2C_FAST_SPD;
> + i2c->fs_clock = HSI2C_FS_TX_CLOCK;
> + }
> +
> + if (op_clock >= HSI2C_HS_TX_CLOCK) {
... this should be 'else if'
> + i2c->speed_mode = HSI2C_HIGH_SPD;
> + i2c->fs_clock = HSI2C_FS_TX_CLOCK;
> + i2c->hs_clock = op_clock;
> + } else {
> + i2c->speed_mode = HSI2C_FAST_SPD;
> + i2c->fs_clock = op_clock;
> + }
...
> + i2c->bus_id = of_alias_get_id(i2c->adap.dev.of_node, "hsi2c");
Huh, the core already gets an alias for you. Can't you use 'adap.nr'?
Rest looks good.
Thanks!
Attachment:
signature.asc
Description: Digital signature
