Add separate nodes for the CAMCLK pin and turn off pull-up on camera
ports A, B. The video bus pins and the clock output (CAMCLK) pin need
separate nodes since full camera port is not used in some configurations,
e.g. for MIPI CSI-2 bus only CAMCLK is required and data/clock signal
use separate dedicated pins.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 40 ++++++++++++++++++++++++-----
1 file changed, 33 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 704290f..50eaa95 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -401,13 +401,26 @@
samsung,pin-drv = <0>;
};
- cam_port_a: cam-port-a {
+ cam_port_a_io: cam-port-a-io {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
- "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
- "gpj1-4";
+ "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_port_a_clk_active: cam-port-a-clk-active {
+ samsung,pins = "gpj1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ cam_port_a_clk_idle: cam-port-a-clk-idle {
+ samsung,pins = "gpj1-3";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
@@ -778,16 +791,29 @@
samsung,pin-drv = <3>;
};
- cam_port_b: cam-port-b {
+ cam_port_b_io: cam-port-b-io {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
- "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
- "gpm2-2";
+ "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
+ cam_port_b_clk_active: cam-port-b-clk-active {
+ samsung,pins = "gpm2-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ cam_port_b_clk_idle: cam-port-b-clk-idle {
+ samsung,pins = "gpm2-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
eint0: ext-int0 {
samsung,pins = "gpx0-0";
samsung,pin-function = <0xf>;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
