On Thursday 20 of June 2013 17:25:12 Jingoo Han wrote:
> On Thursday, June 20, 2013 5:04 PM, Tomasz Figa wrote:
> > Hi Jingoo,
> >
> > On Thursday 20 of June 2013 16:12:24 Jingoo Han wrote:
> > > Exynos5440 has two PCIe controllers which can be used as root complex
> > > for PCIe interface.
> > >
> > > Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
> > > ---
> > >
> > > arch/arm/boot/dts/exynos5440-ssdk5440.dts | 8 ++++++
> > > arch/arm/boot/dts/exynos5440.dtsi | 40
> > >
> > > ++++++++++++++++++++++++++++- 2 files changed, 47 insertions(+), 1
> > > deletion(-)
> > >
> > > diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
> > > b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index f32cd77..3d93804
> > > 100644
> > > --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
> > > +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
> > > @@ -65,4 +65,12 @@
> > >
> > > clock-frequency = <50000000>;
> > >
> > > };
> > >
> > > };
> > >
> > > +
> > > + pcie0@290000 {
> > > + reset-gpio = <&pin_ctrl 5 0>;
> > > + };
> > > +
> > > + pcie1@2a0000 {
> > > + reset-gpio = <&pin_ctrl 22 0>;
> > > + };
> > >
> > > };
> > >
> > > diff --git a/arch/arm/boot/dts/exynos5440.dtsi
> > > b/arch/arm/boot/dts/exynos5440.dtsi index 03d40c0..6295eda 100644
> > > --- a/arch/arm/boot/dts/exynos5440.dtsi
> > > +++ b/arch/arm/boot/dts/exynos5440.dtsi
> > > @@ -126,7 +126,7 @@
> > >
> > > clock-names = "spi", "spi_busclk0";
> > >
> > > };
> > >
> > > - pinctrl {
> > > + pin_ctrl: pinctrl {
> > >
> > > compatible = "samsung,exynos5440-pinctrl";
> > > reg = <0xE0000 0x1000>;
> > > interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
> > >
> > > @@ -230,4 +230,42 @@
> > >
> > > clocks = <&clock 24>;
> > > clock-names = "usbhost";
> > >
> > > };
> >
> > I think this patch should be split into two:
> > - patch adding just generlic PCIe nodes for Exynos5440,
> > - patch adding label to the pinctrl node (which is a prerequisite) and
> >
> > board-specific properties of PCIe nodes.
>
> Do you mean the following?
>
> 1. patch adding just generlic PCIe nodes for Exynos5440
> [PATCH] ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
>
> arch/arm/boot/dts/exynos5440.dtsi
> +
> + pcie@290000 {
> + compatible = "samsung,exynos5440-pcie";
> + reg = <0x290000 0x1000
> + 0x270000 0x1000
> + 0x271000 0x40>;
> + interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
> + clocks = <&clock 28>, <&clock 27>;
> + clock-names = "pcie", "pcie_bus";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000 /*
> configuration space */ + 0x81000000 0 0 0x40001000 0 0x00010000
> /* downstream I/O */ + 0x82000000 0 0x40011000 0x40011000 0
> 0x1ffef000>; /* non-prefetchable memory */ + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0x0 0 &gic 53>;
> + };
> +
> + pcie@2a0000 {
> + compatible = "samsung,exynos5440-pcie";
> + reg = <0x2a0000 0x1000
> + 0x272000 0x1000
> + 0x271040 0x40>;
> + interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
> + clocks = <&clock 29>, <&clock 27>;
> + clock-names = "pcie", "pcie_bus";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000 /*
> configuration space */ + 0x81000000 0 0 0x60001000 0 0x00010000
> /* downstream I/O */ + 0x82000000 0 0x60011000 0x60011000 0
> 0x1ffef000>; /* non-prefetchable memory */ + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0x0 0 &gic 56>;
> + };
>
>
>
> 2. patch adding label to the pinctrl node (which is a prerequisite) and
> board-specific properties of PCIe nodes.
> [PATCH] ARM: dts: Add pcie controller node for exynos5440-ssdk5440
>
> arch/arm/boot/dts/exynos5440-ssdk5440.dts
> +
> + pcie0@290000 {
> + reset-gpio = <&pin_ctrl 5 0>;
> + };
> +
> + pcie1@2a0000 {
> + reset-gpio = <&pin_ctrl 22 0>;
> + };
>
> arch/arm/boot/dts/exynos5440.dtsi
> - pinctrl {
> + pin_ctrl: pinctrl {
>
Exactly.
> > > +
> > > + pcie0@290000 {
> >
> > Node naming looks incorrect here. The name should be as generic as
> > possible, without any hardware-specific IDs, e.g. pcie, not pcie0. The
> > @290000 suffix is enough to make the node unique.
>
> I see. You are right.
> I will fix it.
Thanks.
Best regards,
Tomasz
> Best regards,
> Jingoo Han
>
> > > + compatible = "samsung,exynos5440-pcie";
> > > + reg = <0x290000 0x1000
> > > + 0x270000 0x1000
> > > + 0x271000 0x40>;
> > > + interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
> > > + clocks = <&clock 28>, <&clock 27>;
> > > + clock-names = "pcie", "pcie_bus";
> > > + #address-cells = <3>;
> > > + #size-cells = <2>;
> > > + device_type = "pci";
> > > + ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000
> >
> > /*
> >
> > > configuration space */ + 0x81000000 0 0
> >
> > 0x40001000 0 0x00010000
> >
> > > /* downstream I/O */ + 0x82000000 0 0x40011000
> >
> > 0x40011000 0
> >
> > > 0x1ffef000>; /* non-prefetchable memory */ + #interrupt-cells =
> >
> > <1>;
> >
> > > + interrupt-map-mask = <0 0 0 0>;
> > > + interrupt-map = <0x0 0 &gic 53>;
> > > + };
> > > +
> > > + pcie1@2a0000 {
> >
> > Same here.
> >
> > Best regards,
> > Tomasz
> >
> > > + compatible = "samsung,exynos5440-pcie";
> > > + reg = <0x2a0000 0x1000
> > > + 0x272000 0x1000
> > > + 0x271040 0x40>;
> > > + interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
> > > + clocks = <&clock 29>, <&clock 27>;
> > > + clock-names = "pcie", "pcie_bus";
> > > + #address-cells = <3>;
> > > + #size-cells = <2>;
> > > + device_type = "pci";
> > > + ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000
> >
> > /*
> >
> > > configuration space */ + 0x81000000 0 0
> >
> > 0x60001000 0 0x00010000
> >
> > > /* downstream I/O */ + 0x82000000 0 0x60011000
> >
> > 0x60011000 0
> >
> > > 0x1ffef000>; /* non-prefetchable memory */ + #interrupt-cells =
> >
> > <1>;
> >
> > > + interrupt-map-mask = <0 0 0 0>;
> > > + interrupt-map = <0x0 0 &gic 56>;
> > > + };
> > >
> > > };
>
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
