On 19 June 2013 19:58, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
> On Wednesday 19 of June 2013 19:25:27 Chander Kashyap wrote:
>> On 19 June 2013 19:19, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
>> > On Wednesday 19 of June 2013 14:24:17 Lorenzo Pieralisi wrote:
>> >> On Wed, Jun 19, 2013 at 01:50:57PM +0100, Tomasz Figa wrote:
>> >> > On Wednesday 19 of June 2013 17:39:21 Chander Kashyap wrote:
>> >> > > On 18 June 2013 23:29, Kukjin Kim <kgene.kim@xxxxxxxxxxx> wrote:
>> >> > > > On 06/19/13 02:45, Tomasz Figa wrote:
>> >> > > >> Ccing Arnd and Olof, because I forgot to add them to git
>> >> > > >> send-email...
>> >> > > >>
>> >> > > >> Sorry for the noise.
>> >> > > >>
>> >> > > >> On Tuesday 18 of June 2013 17:26:31 Tomasz Figa wrote:
>> >> > > >>> S5P_ARM_CORE1_* registers affect only core 1. To control
>> >> > > >>> further
>> >> > > >>> cores
>> >> > > >>> properly another registers must be used.
>> >> > > >>>
>> >> > > >>> This patch replaces S5P_ARM_CORE1_* register definitions with
>> >> > > >>> S5P_ARM_CORE_*(x) macro which return addresses of registers
>> >> > > >>> for
>> >> > > >>> specified core.
>> >> > > >>>
>> >> > > >>> This fixes CPU hotplug on quad core Exynos SoCs on which
>> >> > > >>> currently
>> >> > > >>> offlining CPUs 2 or 3 caused CPU 1 to be turned off.
>> >> > > >>
>> >> > > >> Obviously this doesn't happen currently because of the if (cpu
>> >> > > >> ==
>> >> > > >> 1),
>> >> > > >> but>
>> >> > > >
>> >> > > > Yes, not happened...and just note exynos5440 doesn't support
>> >> > > > hotplug :)
>> >> > > > so this is available on exynos4412 and added 5420.
>> >> > > >
>> >> > > >> if logical cpu1 turned out not to be physical cpu1, then it
>> >> > > >> would
>> >> > > >> crash.
>> >> > > >>
>> >> > > >> Best regards,
>> >> > > >> Tomasz
>> >> > > >>
>> >> > > >>> In addition,
>> >> > > >>> bring-up of CPU 2 and 3 is fixed on boards where bootloader
>> >> > > >>> powers
>> >> > > >>> off
>> >> > > >>> secondary cores by default.
>> >> > > >
>> >> > > > I need to test on board about above...
>> >> > > >
>> >> > > >>> Cc: stable@xxxxxxxxxxxxxxx
>> >> > > >>> Signed-off-by: Tomasz Figa<t.figa@xxxxxxxxxxx>
>> >> > > >>> Signed-off-by: Kyungmin Park<kyungmin.park@xxxxxxxxxxx>
>> >> > > >>> ---
>> >> > > >>>
>> >> > > >>> arch/arm/mach-exynos/hotplug.c | 9 +++++----
>> >> > > >>> arch/arm/mach-exynos/include/mach/regs-pmu.h | 10 +++++++---
>> >> > > >>> arch/arm/mach-exynos/platsmp.c | 9 +++++----
>> >> > > >>> 3 files changed, 17 insertions(+), 11 deletions(-)
>> >> > > >>>
>> >> > > >>> diff --git a/arch/arm/mach-exynos/hotplug.c
>> >> > > >>> b/arch/arm/mach-exynos/hotplug.c index af90cfa..c089943 100644
>> >> > > >>> --- a/arch/arm/mach-exynos/hotplug.c
>> >> > > >>> +++ b/arch/arm/mach-exynos/hotplug.c
>> >> > > >>> @@ -93,10 +93,11 @@ static inline void
>> >> > > >>> cpu_leave_lowpower(void)
>> >> > > >>>
>> >> > > >>> static inline void platform_do_lowpower(unsigned int cpu,
>> >> > > >>> int
>> >> > > >>>
>> >> > > >>> *spurious) {
>> >> > > >>>
>> >> > > >>> for (;;) {
>> >> > > >>>
>> >> > > >>> + void __iomem *reg_base;
>> >> > > >>> + unsigned int phys_cpu = cpu_logical_map(cpu);
>> >> > > >>>
>> >> > > >>> - /* make cpu1 to be turned off at next WFI
>> >> > > >>> command
>> >> > > >>> */
>> >> > > >>> - if (cpu == 1)
>> >> > > >>> - __raw_writel(0,
>> >> > > >>> S5P_ARM_CORE1_CONFIGURATION);
>> >> > > >>> + reg_base =
>> >> > > >>> S5P_ARM_CORE_CONFIGURATION(phys_cpu);
>> >> > >
>> >> > > Tomasz,
>> >> > > This will break for non-zero, MPIDR value. Say if MPIDR is 1 then
>> >> > > for
>> >> > > cpu0 phys_cpu value will be 0x100,
>> >> > > and address calculation will be (S5P_ARM_CORE0_CONFIGURATION +
>> >> > > ((0x101) * 0x80)), which is wrong.
>> >>
>> >> Honestly, I did not understand the reasoning above, please clarify.
>> >>
>> >> > Hmm, according to the code initializing __cpu_logical_map[] array
>> >> > this
>> >> > is not true.
>> >> >
>> >> > Here's the code:
>> >> >
>> >> > https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tre
>> >> > e/a
>> >> > rch/arm/kernel/setup.c?id=refs/tags/next-20130619#n468
>> >> >
>> >> > and for used macros and bitmasks:
>> >> >
>> >> > https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tre
>> >> > e/a
>> >> > rch/arm/include/asm/cputype.h?id=refs/tags/next-20130619#n45
>> >> >
>> >> > Now the structure of the MPIDR register:
>> >> >
>> >> > http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0388e
>> >> > /CI
>> >> > HEBGFG.html
>> >> >
>> >> > As you can see, the value read from the register in
>> >> > smp_setup_processor_id() is only the physical CPU ID, so I don't see
>> >> > any
>> >> > problem here.
>> >>
>> >> Define "physical CPU ID" :-)
>> >>
>> >> There is a problem here: the MPIDR is not an index, and the
>> >> cpu_logical_map is populated in arm_dt_init_cpu_maps in:
>> >>
>> >> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/a
>> >> rch /arm/kernel/devtree.c?id=refs/tags/v3.10-rc6
>> >>
>> >> with all affinity levels.
>> >
>> > OK. This is what I was missing. Thanks.
>> >
>> >> You need to perform a mapping between logical cpus and registers
>> >> offset,
>> >> you can't use the cpu_logical_map directly for that.
>> >
>> > Hmm, can't I just extract cluster ID and CPU ID from the MPIDR value
>> > and
>> > use them appropriately to calculate register offsets?
>>
>> That will create problem for multi-cluster systems. Say we have two
>> clusters then with clusterID 0 and 1. So phys-cpu will be 0x0/0x100,
>> 0x1/0x101 ans so on.
>
> I mean, calculate register offset based on two parameters - cluster ID and
> CPU ID, like:
>
> ...
>
> u32 mpidr = cpu_logical_map(cpu);
> u32 phys_cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
>
> if (soc_is_exynosXXXX()) {
> u32 cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
>
> phys_cpu += EXYNOSXXXX_CPUS_PER_CLUSTER * cluster;
> }
>
> reg_base = S5P_ARM_CORE_CONFIGURATION(phys_cpu);
> __raw_writel(0, reg_base);
>
This does not seems to viable solution, as eg. clusterID for
exynos4210 is 0x9 and exynos 4412 is 0xa. But if we wass the cpu nodes
thru DT, the we can comfortably rely on the logical cpu number. Also
EXYNOSXXXX_CPUS_PER_CLUSTER can vary from cluster to cluster.
> ...
>
> Best regards,
> Tomasz
>
>> > Best regards,
>> > Tomasz
>> >
>> >> Next accident waiting to happen is GIC code (CONFIG_GIC_NON_BANKED),
>> >> where cpu_logical_map is used erroneously as an index.
>> >>
>> >> Lorenzo
>>
>> --
>> with warm regards,
>> Chander Kashyap
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
with warm regards,
Chander Kashyap
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
