This patchset adds the pinctrl support to Exynos5420.
This series is rebased and tested on for-next branch of kgene tree.
Changes since V2:
- As Tomasz figa suggested, changed the sd0_bus4, sd1_bus4 and sd2_bus4
nodes in pinctrl file so that gpio pins don't overlap between groups.
- GPIO interrupt register offsets are added for exynos5420_pin_ctrl structure
- Changed the gpio pin count from 8 to 7 for gpz
- Added Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Removed the patch "gpio: samsung: skip gpiolib registration if pinctrl support
is enabled for exynos5420" from the series.
Changes since V1:
- As gpy7 bank supports interrupts, it is defined using EINTG macro
Leela Krishna Amudala (2):
ARM: dts: add pinctrl support to Exynos5420
pinctrl: exynos: add exynos5420 SoC specific data
.../bindings/pinctrl/samsung-pinctrl.txt | 1 +
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 680 ++++++++++++++++++++
arch/arm/boot/dts/exynos5420.dtsi | 45 ++
drivers/pinctrl/pinctrl-exynos.c | 118 ++++
drivers/pinctrl/pinctrl-samsung.c | 2 +
drivers/pinctrl/pinctrl-samsung.h | 1 +
6 files changed, 847 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5420-pinctrl.dtsi
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
