With this patch, it is at par with Exynos5250 and Exynos4 clocks
where sclk_pixel ID is assigned to a divider clock but in real,
sclk_pixel is listed under gate clocks (enum value).
Alternate to this, I can allocate a new ID, div_pixel, listed under
new category of Divider Clocks for Exyno4, 5250 and 5420.
div_pixel ID can be assigned to pixel clock dividers for all 3 SoCs.
This ID can be accessed by hdmi driver as usual. While sclk_pixel
ID can be left unused for Exyno4, 5250 as there are no pixel clock
gates. And, For 5420, sclk_pixel can optionally be used to
enable/disable the pixel clock gate.
Regards,
Rahul Sharma.
On Tue, Jun 18, 2013 at 8:03 PM, Rahul Sharma <rahul.sharma@xxxxxxxxxxx> wrote:
> sclk_pixel is used to represent pixel clock divider on all exynos
> SoCs not as a gate clock. It is queried in driver to pass as the
> parent to hdmi clock while switching between parents. A new ID can
> be asssigned Pixel gate clock which is currently not in use. Pixel
> clock gate is default 'on'.
>
> Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
> ---
> drivers/clk/samsung/clk-exynos5420.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> index 59cf177..edd0696 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -434,7 +434,7 @@ struct samsung_div_clock exynos5420_div_clks[] __initdata = {
> DIV(none, "dout_fimd1", "mout_fimd1", DIV_DISP10, 0, 4),
> DIV(none, "dout_mipi1", "mout_mipi1", DIV_DISP10, 16, 8),
> DIV(none, "dout_dp1", "mout_dp1", DIV_DISP10, 24, 4),
> - DIV(none, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4),
> + DIV(sclk_pixel, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4),
>
> /* Audio Block */
> DIV(none, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4),
> @@ -570,7 +570,7 @@ struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
> GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0),
> GATE(sclk_hdmi, "sclk_hdmi", "mout_hdmi",
> GATE_TOP_SCLK_DISP1, 9, CLK_SET_RATE_PARENT, 0),
> - GATE(sclk_pixel, "sclk_pixel", "dout_hdmi_pixel",
> + GATE(none, "sclk_pixel", "dout_hdmi_pixel",
> GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0),
> GATE(sclk_dp1, "sclk_dp1", "dout_dp1",
> GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),
> --
> 1.7.10.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
