This patch modifies TMU controller to add changes needed to work with exynos5440 platform. This sensor registers 3 instance of the tmu controller with the thermal zone and hence reports 3 temperature output. This controller supports upto five trip points. For critical threshold the driver uses the core driver thermal framework for shutdown. Acked-by: Jonghwa Lee <jonghwa3.lee@xxxxxxxxxxx> Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx> Signed-off-by: Jungseok Lee <jays.lee@xxxxxxxxxxx> Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx> --- .../devicetree/bindings/thermal/exynos-thermal.txt | 24 ++++++++- drivers/thermal/samsung/exynos_thermal_common.h | 2 +- drivers/thermal/samsung/exynos_tmu.c | 54 +++++++++++++++++--- drivers/thermal/samsung/exynos_tmu.h | 6 ++ drivers/thermal/samsung/exynos_tmu_data.h | 36 +++++++++++++ 5 files changed, 112 insertions(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index 0ea33f7..e6386ea 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -6,6 +6,7 @@ "samsung,exynos4412-tmu" "samsung,exynos4210-tmu" "samsung,exynos5250-tmu" + "samsung,exynos5440-tmu" - interrupt-parent : The phandle for the interrupt controller - reg : Address range of the thermal registers. For soc's which has multiple instances of TMU and some registers are shared across all TMU's like @@ -16,7 +17,7 @@ - clocks : The main clock for TMU device - clock-names : Thermal system clock name -Example: +Example 1): tmu@100C0000 { compatible = "samsung,exynos4412-tmu"; @@ -27,3 +28,24 @@ Example: clock-names = "tmu_apbif"; status = "disabled"; }; + +Example 2): + + tmuctrl_0: tmuctrl@160118 { + compatible = "samsung,exynos5440-tmu"; + reg = <0x160118 0x230>, <0x160368 0x10>; + interrupts = <0 58 0>; + clocks = <&clock 21>; + clock-names = "tmu_apbif"; + }; + +Note: For multi-instance tmu each instance should have an alias correctly +numbered in "aliases" node. + +Example: + +aliases { + tmuctrl0 = &tmuctrl_0; + tmuctrl1 = &tmuctrl_1; + tmuctrl2 = &tmuctrl_2; +}; diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h index 0c189d6..7d7c29a 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.h +++ b/drivers/thermal/samsung/exynos_thermal_common.h @@ -27,7 +27,7 @@ #define SENSOR_NAME_LEN 16 #define MAX_TRIP_COUNT 8 #define MAX_COOLING_DEVICE 4 -#define MAX_THRESHOLD_LEVS 4 +#define MAX_THRESHOLD_LEVS 5 #define ACTIVE_INTERVAL 500 #define IDLE_INTERVAL 10000 diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 150a869..db4035d 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -156,7 +156,26 @@ static int exynos_tmu_initialize(struct platform_device *pdev) __raw_writel(1, data->base + reg->triminfo_ctrl); /* Save trimming info in order to perform calibration */ - trim_info = readl(data->base + reg->triminfo_data); + if (data->soc == SOC_ARCH_EXYNOS5440) { + /* + * For exynos5440 soc triminfo value is swapped between TMU0 and + * TMU2, so the below logic is needed. + */ + switch (data->id) { + case 0: + trim_info = readl(data->base + + EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); + break; + case 1: + trim_info = readl(data->base + reg->triminfo_data); + break; + case 2: + trim_info = readl(data->base - + EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); + } + } else { + trim_info = readl(data->base + reg->triminfo_data); + } data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) & EXYNOS_TMU_TEMP_MASK); @@ -201,7 +220,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev) reg->threshold_th0 + i * sizeof(reg->threshold_th0)); writel(reg->inten_rise_mask, data->base + reg->tmu_intclear); - } else if (data->soc == SOC_ARCH_EXYNOS) { + } else if (data->soc == SOC_ARCH_EXYNOS || + data->soc == SOC_ARCH_EXYNOS5440) { /* Write temperature code for rising and falling threshold */ for (i = 0; i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) { @@ -241,14 +261,24 @@ static int exynos_tmu_initialize(struct platform_device *pdev) ret = threshold_code; goto out; } - rising_threshold |= threshold_code << 8 * i; - writel(rising_threshold, - data->base + reg->threshold_th0); + if (data->soc == SOC_ARCH_EXYNOS) { + rising_threshold |= threshold_code << 8 * i; + writel(rising_threshold, + data->base + reg->threshold_th0); + } else if (data->soc == SOC_ARCH_EXYNOS5440) { + rising_threshold = + threshold_code << reg->threshold_th3_l0_shift; + writel(rising_threshold, + data->base + reg->threshold_th2); + } con = readl(data->base + reg->tmu_ctrl); con |= (1 << reg->therm_trip_en_shift); writel(con, data->base + reg->tmu_ctrl); } } + /*Clear the PMIN in the common TMU register*/ + if (reg->tmu_pmin && !data->id) + writel(0, data->base_common + reg->tmu_pmin); out: clk_disable(data->clk); mutex_unlock(&data->lock); @@ -377,7 +407,14 @@ static void exynos_tmu_work(struct work_struct *work) struct exynos_tmu_data, irq_work); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int val_irq; + unsigned int val_irq, val_type; + + /* Find which sensor generated this interrupt */ + if (reg->tmu_irqstatus) { + val_type = readl(data->base_common + reg->tmu_irqstatus); + if (!((val_type >> data->id) & 0x1)) + goto out; + } exynos_report_trigger(data->reg_conf); mutex_lock(&data->lock); @@ -390,7 +427,7 @@ static void exynos_tmu_work(struct work_struct *work) clk_disable(data->clk); mutex_unlock(&data->lock); - +out: enable_irq(data->irq); } @@ -544,7 +581,8 @@ static int exynos_tmu_probe(struct platform_device *pdev) return ret; if (pdata->type == SOC_ARCH_EXYNOS || - pdata->type == SOC_ARCH_EXYNOS4210) + pdata->type == SOC_ARCH_EXYNOS4210 || + pdata->type == SOC_ARCH_EXYNOS5440) data->soc = pdata->type; else { ret = -EINVAL; diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index 6f55673..73aaed7 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -38,6 +38,7 @@ enum calibration_mode { enum soc_type { SOC_ARCH_EXYNOS4210 = 1, SOC_ARCH_EXYNOS, + SOC_ARCH_EXYNOS5440, }; /** @@ -129,6 +130,8 @@ enum soc_type { * @emul_temp_shift: shift bits of emulation temperature. * @emul_time_shift: shift bits of emulation time. * @emul_time_mask: mask bits of emulation time. + * @tmu_irqstatus: register to find which TMU generated interrupts. + * @tmu_pmin: register to get/set the Pmin value. */ struct exynos_tmu_registers { u32 triminfo_data; @@ -196,6 +199,9 @@ struct exynos_tmu_registers { u32 emul_temp_shift; u32 emul_time_shift; u32 emul_time_mask; + + u32 tmu_irqstatus; + u32 tmu_pmin; }; /** diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index 139dbbb..ad263e9 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -93,6 +93,42 @@ #define EXYNOS_MAX_TRIGGER_PER_REG 4 +/*exynos5440 specific registers*/ +#define EXYNOS5440_TMU_S0_7_TRIM 0x000 +#define EXYNOS5440_TMU_S0_7_CTRL 0x020 +#define EXYNOS5440_TMU_S0_7_DEBUG 0x040 +#define EXYNOS5440_TMU_S0_7_STATUS 0x060 +#define EXYNOS5440_TMU_S0_7_TEMP 0x0f0 +#define EXYNOS5440_TMU_S0_7_TH0 0x110 +#define EXYNOS5440_TMU_S0_7_TH1 0x130 +#define EXYNOS5440_TMU_S0_7_TH2 0x150 +#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0 +#define EXYNOS5440_TMU_S0_7_IRQEN 0x210 +#define EXYNOS5440_TMU_S0_7_IRQ 0x230 +/* exynos5440 common registers */ +#define EXYNOS5440_TMU_IRQ_STATUS 0x000 +#define EXYNOS5440_TMU_PMIN 0x004 +#define EXYNOS5440_TMU_TEMP 0x008 + +#define EXYNOS5440_TMU_RISE_INT_MASK 0xf +#define EXYNOS5440_TMU_RISE_INT_SHIFT 0 +#define EXYNOS5440_TMU_FALL_INT_MASK 0xf +#define EXYNOS5440_TMU_FALL_INT_SHIFT 4 +#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0 +#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1 +#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2 +#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3 +#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4 +#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5 +#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6 +#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7 +#define EXYNOS5440_TMU_TH_RISE0_SHIFT 0 +#define EXYNOS5440_TMU_TH_RISE1_SHIFT 8 +#define EXYNOS5440_TMU_TH_RISE2_SHIFT 16 +#define EXYNOS5440_TMU_TH_RISE3_SHIFT 24 +#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 +#define EXYNOS5440_EFUSE_SWAP_OFFSET 8 + #if defined(CONFIG_CPU_EXYNOS4210) extern struct exynos_tmu_init_data const exynos4210_default_tmu_data; #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data) -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html