On 8 June 2013 17:08, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote: > On Thursday 06 of June 2013 16:31:24 Chander Kashyap wrote: >> Add initial device tree nodes for Exynos5420 SoC and SMDK5420 board. >> >> Signed-off-by: Chander Kashyap <chander.kashyap@xxxxxxxxxx> >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/exynos5420-smdk5420.dts | 40 ++++++++++++ >> arch/arm/boot/dts/exynos5420.dtsi | 101 >> +++++++++++++++++++++++++++++ 3 files changed, 142 insertions(+) >> create mode 100644 arch/arm/boot/dts/exynos5420-smdk5420.dts >> create mode 100644 arch/arm/boot/dts/exynos5420.dtsi >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index cb31259..304ba4d 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ >> exynos5250-arndale.dtb \ >> exynos5440-sd5v1.dtb \ >> exynos5250-smdk5250.dtb \ >> + exynos5420-smdk5420.dtb \ > > Please keep the sorting order. > >> exynos5250-snow.dtb \ > > Here is the correct place for exynos5440-*. I will sort it. > >> exynos5440-ssdk5440.dtb >> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ >> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts >> b/arch/arm/boot/dts/exynos5420-smdk5420.dts new file mode 100644 >> index 0000000..b14e775 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts >> @@ -0,0 +1,40 @@ >> +/* >> + * SAMSUNG SMDK5420 board device tree source >> + * >> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as + >> * published by the Free Software Foundation. >> +*/ >> + >> +/dts-v1/; >> +/include/ "exynos5420.dtsi" > > #include "exynos5420.dtsi" > >> + >> +/ { >> + model = "Samsung SMDK5420 board based on EXYNOS5420"; >> + compatible = "samsung,smdk5420", "samsung,exynos5420"; >> + >> + memory { >> + reg = <0x20000000 0x10000000 >> + 0x30000000 0x10000000 >> + 0x40000000 0x10000000 >> + 0x50000000 0x10000000 >> + 0x60000000 0x10000000 >> + 0x70000000 0x10000000 >> + 0x80000000 0x10000000 >> + 0x90000000 0x10000000>; >> + }; >> + >> + chosen { >> + bootargs = "console=ttySAC2,115200 init=/linuxrc"; >> + }; >> + >> + fixed-rate-clocks { >> + oscclk { >> + compatible = "samsung,exynos5420-oscclk"; >> + clock-frequency = <24000000>; >> + }; >> + }; >> +}; >> diff --git a/arch/arm/boot/dts/exynos5420.dtsi >> b/arch/arm/boot/dts/exynos5420.dtsi new file mode 100644 >> index 0000000..577dfe5 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5420.dtsi >> @@ -0,0 +1,101 @@ >> +/* >> + * SAMSUNG EXYNOS5420 SoC device tree source >> + * >> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file. >> + * EXYNOS5420 based board files can include this file and provide >> + * values for board specfic bindings. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as + >> * published by the Free Software Foundation. >> +*/ > > nitpick: missing space to keep the alignment of stars > >> + >> +/include/ "skeleton.dtsi" >> +/include/ "exynos5.dtsi" > > #include and IMHO skeleton.dtsi should be already included from > exynos5.dtsi. > >> +/ { >> + compatible = "samsung,exynos5420"; >> + >> + clock: clock-controller@0x10010000 { >> + compatible = "samsung,exynos5420-clock"; >> + reg = <0x10010000 0x30000>; >> + #clock-cells = <1>; >> + }; >> + >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + cpu0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a15"; >> + reg = <0x0>; >> + clock-frequency = <800000000>; > > Hmm. I don't remember seeing this property in CPU bindings, but maybe I'm > missing something. Anyway this makes little sense, since on every board > this frequency may be different. Not even saying about CPU frequency > scaling that would change it. Well this is used to calculate cpu capacity. > >> + }; >> + >> + cpu1: cpu@1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a15"; >> + reg = <0x1>; >> + clock-frequency = <800000000>; >> + }; >> + >> + cpu2: cpu@2 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a15"; >> + reg = <0x2>; >> + clock-frequency = <800000000>; >> + }; >> + >> + cpu3: cpu@3 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a15"; >> + reg = <0x3>; >> + clock-frequency = <800000000>; >> + }; >> + }; >> + >> + mct@101C0000 { >> + compatible = "samsung,exynos4210-mct"; >> + reg = <0x101C0000 0x800>; >> + interrupt-controller; >> + #interrups-cells = <2>; >> + interrupt-parent = <&mct_map>; >> + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, >> + <4 0>, <5 0>, <6 0>, <7 0>; >> + clocks = <&clock 1>, <&clock 315>; >> + clock-names = "fin_pll", "mct"; >> + >> + mct_map: mct-map { >> + #interrupt-cells = <2>; > > Why do you need 2 cells here, if second one is unused in the map and kept > as 0? > >> + #address-cells = <0>; >> + #size-cells = <0>; >> + interrupt-map = <0x0 0 &combiner 23 3>, >> + <0x1 0 &combiner 23 4>, >> + <0x2 0 &combiner 25 2>, >> + <0x3 0 &combiner 25 3>, >> + <0x4 0 &gic 0 120 0>, >> + <0x5 0 &gic 0 121 0>, >> + <0x6 0 &gic 0 122 0>, >> + <0x7 0 &gic 0 123 0>; > > Having #interrupt-cells = <1> would allow to simplify the map to: > > interrupt-map = <0 &combiner 23 3>, > <1 &combiner 23 4>, > <2 &combiner 25 2>, > <3 &combiner 25 3>, > <4 &gic 0 120 0>, > <5 &gic 0 121 0>, > <6 &gic 0 122 0>, > <7 &gic 0 123 0>; > > and interrupt specifiers in mct node to: > > interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>; > I will do the necessary changer. >> + }; >> + }; >> + >> + serial@12C00000 { >> + clocks = <&clock 257>, <&clock 128>; > > This looks a bit awkward without the clock-names property here. See my > comments to patch 03/13. I will move the clock names and number to same place. > > Best regards, > Tomasz > >> + }; >> + >> + serial@12C10000 { >> + clocks = <&clock 258>, <&clock 129>; >> + }; >> + >> + serial@12C20000 { >> + clocks = <&clock 259>, <&clock 130>; >> + }; >> + >> + serial@12C30000 { >> + clocks = <&clock 260>, <&clock 131>; >> + }; >> +}; Thanks for the review. -- with warm regards, Chander Kashyap -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |