Hi Tomasz, Thanks for reviewing the patchset/ On Thu, Jun 13, 2013 at 2:28 AM, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote: > Hi Leela Krishna, > > On Wednesday 12 of June 2013 20:21:26 Leela Krishna Amudala wrote: >> Add the required pin configuration support to Exynos5420 using pinctrl >> interface. >> >> Signed-off-by: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx> >> --- >> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 680 >> +++++++++++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi >> | 45 ++ >> 2 files changed, 725 insertions(+) >> create mode 100644 arch/arm/boot/dts/exynos5420-pinctrl.dtsi >> >> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi >> b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi new file mode 100644 >> index 0000000..23b7521 >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi >> @@ -0,0 +1,680 @@ >> +/* >> + * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source >> + * >> + * Copyright (c) 2013 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed >> as device + * tree nodes are listed in this file. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as + >> * published by the Free Software Foundation. >> +*/ >> + >> +/ { >> + pinctrl@13400000 { >> + gpy7: gpy7 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; > > According to patch 2/3, this bank doesn't support interrupts, as it's > defined using EINTN macro. Which variant is correct? > Its my mistake, gpy7 will support interrupts, so I'll change EINTN to EINTG in other patch. >> + }; >> + >> + gpx0: gpx0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + interrupt-parent = <&combiner>; >> + #interrupt-cells = <2>; >> + interrupts = <23 0>, <24 0>, <25 0>, <25 1>, >> + <26 0>, <26 1>, <27 0>, <27 1>; >> + }; >> + >> + gpx1: gpx1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + interrupt-parent = <&combiner>; >> + #interrupt-cells = <2>; >> + interrupts = <28 0>, <28 1>, <29 0>, <29 1>, >> + <30 0>, <30 1>, <31 0>, <31 1>; >> + }; >> + >> + gpx2: gpx2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpx3: gpx3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + }; >> + >> + pinctrl@13410000 { >> + gpc0: gpc0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc1: gpc1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc2: gpc2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc3: gpc3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpc4: gpc4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpd1: gpd1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpy0: gpy0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> + >> + gpy1: gpy1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> + >> + gpy2: gpy2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> + >> + gpy3: gpy3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> + >> + gpy4: gpy4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> + >> + gpy5: gpy5 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> + >> + gpy6: gpy6 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + }; >> + >> + sd0_clk: sd0-clk { >> + samsung,pins = "gpc0-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_cmd: sd0-cmd { >> + samsung,pins = "gpc0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_cd: sd0-cd { >> + samsung,pins = "gpc0-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus1: sd0-bus-width1 { >> + samsung,pins = "gpc0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus4: sd0-bus-width4 { >> + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", > "gpc0-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd0_bus8: sd0-bus-width8 { >> + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", > "gpc3-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; > > > It seems like there is some inconsequence here, because sd0_bus4 setting > includes pins of sd0_bus1, while sd0_bus8 doesn't include pins of > sd0_bus4. > > I think it should be defined either first or second way, not mixed, but I > don't have any strong preference over any of them. > > CCing some people to hopefully get some more opinion on this. > I'll check and post the appropriate changes to this. Best Wishes, Leela Krishna Amudala. >> + sd1_clk: sd1-clk { >> + samsung,pins = "gpc1-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_cmd: sd1-cmd { >> + samsung,pins = "gpc1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_cd: sd1-cd { >> + samsung,pins = "gpc1-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_int: sd1-int { >> + samsung,pins = "gpd1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + sd1_bus1: sd1-bus-width1 { >> + samsung,pins = "gpc1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus4: sd1-bus-width4 { >> + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5", > "gpc1-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd1_bus8: sd1-bus-width8 { >> + samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", > "gpd1-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; > > Same here. > > Rest of the patch looks fine to me. > > Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx> > > Best regards, > Tomasz > >> + sd2_clk: sd2-clk { >> + samsung,pins = "gpc2-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_cmd: sd2-cmd { >> + samsung,pins = "gpc2-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_cd: sd2-cd { >> + samsung,pins = "gpc2-2"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_bus1: sd2-bus-width1 { >> + samsung,pins = "gpc2-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + >> + sd2_bus4: sd2-bus-width4 { >> + samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", > "gpc2-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <3>; >> + }; >> + }; >> + >> + pinctrl@14000000 { >> + gpe0: gpe0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpe1: gpe1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf0: gpf0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpf1: gpf1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpg0: gpg0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpg1: gpg1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpg2: gpg2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpj4: gpj4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + cam_gpio_a: cam-gpio-a { >> + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", > "gpe0-3", >> + "gpe0-4", "gpe0-5", "gpe0-6", > "gpe0-7", >> + "gpe1-0", "gpe1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_gpio_b: cam-gpio-b { >> + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", > "gpf0-3", >> + "gpf1-0", "gpf1-1", "gpf1-2", > "gpf1-3"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_i2c2_bus: cam-i2c2-bus { >> + samsung,pins = "gpf0-4", "gpf0-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + cam_spi1_bus: cam-spi1-bus { >> + samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", > "gpf0-3"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_i2c1_bus: cam-i2c1-bus { >> + samsung,pins = "gpf0-2", "gpf0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_i2c0_bus: cam-i2c0-bus { >> + samsung,pins = "gpf0-0", "gpf0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_spi0_bus: cam-spi0-bus { >> + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", > "gpf1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + cam_bayrgb_bus: cam-bayrgb-bus { >> + samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", > "gpg0-3", >> + "gpg0-4", "gpg0-5", "gpg0-6", > "gpg0-7", >> + "gpg1-0", "gpg1-1", "gpg1-2", > "gpg1-3", >> + "gpg1-4", "gpg1-5", "gpg1-6", > "gpg1-7", >> + "gpg2-0"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + }; >> + >> + pinctrl@14010000 { >> + gpa0: gpa0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpa1: gpa1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpa2: gpa2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb0: gpb0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb1: gpb1 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb2: gpb2 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb3: gpb3 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gpb4: gpb4 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + gph0: gph0 { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + uart0_data: uart0-data { >> + samsung,pins = "gpa0-0", "gpa0-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart0_fctl: uart0-fctl { >> + samsung,pins = "gpa0-2", "gpa0-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart1_data: uart1-data { >> + samsung,pins = "gpa0-4", "gpa0-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart1_fctl: uart1-fctl { >> + samsung,pins = "gpa0-6", "gpa0-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c2_bus: i2c2-bus { >> + samsung,pins = "gpa0-6", "gpa0-7"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart2_data: uart2-data { >> + samsung,pins = "gpa1-0", "gpa1-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart2_fctl: uart2-fctl { >> + samsung,pins = "gpa1-2", "gpa1-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c3_bus: i2c3-bus { >> + samsung,pins = "gpa1-2", "gpa1-3"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + uart3_data: uart3-data { >> + samsung,pins = "gpa1-4", "gpa1-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi0_bus: spi0-bus { >> + samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", > "gpa2-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi1_bus: spi1-bus { >> + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c4_hs_bus: i2c4-hs-bus { >> + samsung,pins = "gpa2-0", "gpa2-1"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c5_hs_bus: i2c5-hs-bus { >> + samsung,pins = "gpa2-2", "gpa2-3"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2s1_bus: i2s1-bus { >> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", > "gpb0-3", >> + "gpb0-4"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pcm1_bus: pcm1-bus { >> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", > "gpb0-3", >> + "gpb0-4"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2s2_bus: i2s2-bus { >> + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", > "gpb1-3", >> + "gpb1-4"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + pcm2_bus: pcm2-bus { >> + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", > "gpb1-3", >> + "gpb1-4"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spdif_bus: spdif-bus { >> + samsung,pins = "gpb1-0", "gpb1-1"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + spi2_bus: spi2-bus { >> + samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4"; >> + samsung,pin-function = <5>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c6_hs_bus: i2c6-hs-bus { >> + samsung,pins = "gpb1-3", "gpb1-4"; >> + samsung,pin-function = <4>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c7_hs_bus: i2c7-hs-bus { >> + samsung,pins = "gpb2-2", "gpb2-3"; >> + samsung,pin-function = <3>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c0_bus: i2c0-bus { >> + samsung,pins = "gpb3-0", "gpb3-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c1_bus: i2c1-bus { >> + samsung,pins = "gpb3-2", "gpb3-3"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c8_hs_bus: i2c8-hs-bus { >> + samsung,pins = "gpb3-4", "gpb3-5"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c9_hs_bus: i2c9-hs-bus { >> + samsung,pins = "gpb3-6", "gpb3-7"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + >> + i2c10_hs_bus: i2c10-hs-bus { >> + samsung,pins = "gpb4-0", "gpb4-1"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <3>; >> + samsung,pin-drv = <0>; >> + }; >> + }; >> + >> + pinctrl@03860000 { >> + gpz: gpz { >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + }; >> + >> + i2s0_bus: i2s0-bus { >> + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", >> + "gpz-4", "gpz-5", "gpz-6"; >> + samsung,pin-function = <2>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> + }; >> +}; >> diff --git a/arch/arm/boot/dts/exynos5420.dtsi >> b/arch/arm/boot/dts/exynos5420.dtsi index 577dfe5..e7bf7c7 100644 >> --- a/arch/arm/boot/dts/exynos5420.dtsi >> +++ b/arch/arm/boot/dts/exynos5420.dtsi >> @@ -15,9 +15,18 @@ >> >> /include/ "skeleton.dtsi" >> /include/ "exynos5.dtsi" >> +/include/ "exynos5420-pinctrl.dtsi" >> / { >> compatible = "samsung,exynos5420"; >> >> + aliases { >> + pinctrl0 = &pinctrl_0; >> + pinctrl1 = &pinctrl_1; >> + pinctrl2 = &pinctrl_2; >> + pinctrl3 = &pinctrl_3; >> + pinctrl4 = &pinctrl_4; >> + }; >> + >> clock: clock-controller@0x10010000 { >> compatible = "samsung,exynos5420-clock"; >> reg = <0x10010000 0x30000>; >> @@ -83,6 +92,42 @@ >> }; >> }; >> >> + pinctrl_0: pinctrl@13400000 { >> + compatible = "samsung,exynos5420-pinctrl"; >> + reg = <0x13400000 0x1000>; >> + interrupts = <0 45 0>; >> + >> + wakeup-interrupt-controller { >> + compatible = "samsung,exynos4210-wakeup-eint"; >> + interrupt-parent = <&gic>; >> + interrupts = <0 32 0>; >> + }; >> + }; >> + >> + pinctrl_1: pinctrl@13410000 { >> + compatible = "samsung,exynos5420-pinctrl"; >> + reg = <0x13410000 0x1000>; >> + interrupts = <0 78 0>; >> + }; >> + >> + pinctrl_2: pinctrl@14000000 { >> + compatible = "samsung,exynos5420-pinctrl"; >> + reg = <0x14000000 0x1000>; >> + interrupts = <0 46 0>; >> + }; >> + >> + pinctrl_3: pinctrl@14010000 { >> + compatible = "samsung,exynos5420-pinctrl"; >> + reg = <0x14010000 0x1000>; >> + interrupts = <0 50 0>; >> + }; >> + >> + pinctrl_4: pinctrl@03860000 { >> + compatible = "samsung,exynos5420-pinctrl"; >> + reg = <0x03860000 0x1000>; >> + interrupts = <0 47 0>; >> + }; >> + >> serial@12C00000 { >> clocks = <&clock 257>, <&clock 128>; >> }; > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |