On 8 June 2013 16:35, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote:
> Hi Chander,
>
> On Thursday 06 of June 2013 16:31:16 Chander Kashyap wrote:
>> The CPU power control register address calculation for secondary CPUs is
>> generalized by calculating the register address using secondary cpu
>> logical number.
>>
>> Signed-off-by: Chander Kashyap <chander.kashyap@xxxxxxxxxx>
>> ---
>> arch/arm/mach-exynos/include/mach/regs-pmu.h | 6 ++++++
>> arch/arm/mach-exynos/platsmp.c | 10 +++++-----
>> 2 files changed, 11 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h
>> b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 3f30aa1..b77f72c
>> 100644
>> --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
>> +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
>> @@ -125,11 +125,17 @@
>> #define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
>>
>> #define S5P_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000)
>> +#define S5P_ARM_CORE0_STATUS S5P_PMUREG(0x2004)
>> #define S5P_ARM_CORE0_OPTION S5P_PMUREG(0x2008)
>> #define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080)
>> #define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084)
>> #define S5P_ARM_CORE1_OPTION S5P_PMUREG(0x2088)
>
> I would simply drop all those CORE1 definitions. This would have the nice
> side effect of showing all the occurencies of this issue in other files as
> well.
>
>>
>> +#define S5P_ARM_CORE_CONFIGURATION(_nr) \
>> + (S5P_ARM_CORE0_CONFIGURATION + (_nr) * 0x80)
>> +#define S5P_ARM_CORE_STATUS(_nr) \
>> + (S5P_ARM_CORE0_STATUS + (_nr) * 0x80)
>> +
>> #define S5P_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
>> #define S5P_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
>> #define S5P_CAM_OPTION S5P_PMUREG(0x3C08)
>> diff --git a/arch/arm/mach-exynos/platsmp.c
>> b/arch/arm/mach-exynos/platsmp.c index d9c6d0a..1a4e4e5 100644
>> --- a/arch/arm/mach-exynos/platsmp.c
>> +++ b/arch/arm/mach-exynos/platsmp.c
>> @@ -109,14 +109,14 @@ static int __cpuinit
>> exynos_boot_secondary(unsigned int cpu, struct task_struct */
>> write_pen_release(phys_cpu);
>>
>> - if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN))
> {
>> + if (!(__raw_readl(S5P_ARM_CORE_STATUS(cpu)) &
>
> Shouldn't phys_cpu be used here, not cpu?
phys_cpu is physical cpu-id.When MPIDR will be taken into consideration,
the phys_cpu will leead to wrong offset. Hence in my opinion logical
cpu number should be used.
>
>> S5P_CORE_LOCAL_PWR_EN))
>> { __raw_writel(S5P_CORE_LOCAL_PWR_EN,
>> - S5P_ARM_CORE1_CONFIGURATION);
>> + S5P_ARM_CORE_CONFIGURATION(cpu));
>
> Ditto.
>
>>
>> timeout = 10;
>>
>> - /* wait max 10 ms until cpu1 is on */
>> - while ((__raw_readl(S5P_ARM_CORE1_STATUS)
>> + /* wait max 10 ms until secondary cpu is on */
>> + while ((__raw_readl(S5P_ARM_CORE_STATUS(cpu))
>
> Ditto.
>
>> & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN)
> {
>> if (timeout-- == 0)
>> break;
>> @@ -125,7 +125,7 @@ static int __cpuinit exynos_boot_secondary(unsigned
>> int cpu, struct task_struct }
>>
>> if (timeout == 0) {
>> - printk(KERN_ERR "cpu1 power enable failed");
>> + pr_err("secondary cpu power enable failed\n");
>
> This is not really related to this patch, but I'm not strongly against
> including this fixup in this patch.
>
>> spin_unlock(&boot_lock);
>> return -ETIMEDOUT;
>> }
>
> By the way, I was just about to send similar patch that we have in our
> internal tree and you were faster :) . Mine also fixes the same problem in
> mach-exynos/hotplug.c where CORE1 registers are used.
>
> Now the question is: Are you going to address all those things or we could
> just drop this patch from the series and apply mine instead, which has all
> the things already done?
Good, I will drop this patch from the series. You can send it along
your patches.
thanks.
>
> Best regards,
> Tomasz
>
--
with warm regards,
Chander Kashyap
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
