[PATCH V5 11/30] thermal: exynos: Support thermal tripping

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



TMU urgently sends active-high signal (thermal trip) to PMU, and thermal
tripping by hardware logic. Thermal tripping means that PMU cuts off the
whole power of SoC by controlling external voltage regulator.

Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Signed-off-by: Jonghwan Choi <jhbird.choi@xxxxxxxxxxx>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
---
 drivers/thermal/samsung/exynos_tmu.c      |   45 +++++++++++++++++++++++++---
 drivers/thermal/samsung/exynos_tmu_data.c |    2 +
 drivers/thermal/samsung/exynos_tmu_data.h |    2 +
 3 files changed, 44 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 6fd776f..33f494e 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -117,7 +117,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct exynos_tmu_platform_data *pdata = data->pdata;
 	const struct exynos_tmu_registers *reg = pdata->registers;
-	unsigned int status, trim_info;
+	unsigned int status, trim_info = 0, con;
 	unsigned int rising_threshold = 0, falling_threshold = 0;
 	int ret = 0, threshold_code, i, trigger_levs = 0;
 
@@ -144,10 +144,26 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 			(data->temp_error2 != 0))
 		data->temp_error1 = pdata->efuse_value;
 
-	/* Count trigger levels to be enabled */
-	for (i = 0; i < MAX_THRESHOLD_LEVS; i++)
-		if (pdata->trigger_levels[i])
+	if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
+		dev_err(&pdev->dev, "Invalid max trigger level\n");
+		goto out;
+	}
+
+	for (i = 0; i < pdata->max_trigger_level; i++) {
+		if (!pdata->trigger_levels[i])
+			continue;
+
+		if ((pdata->trigger_type[i] == HW_TRIP) &&
+		(!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
+			dev_err(&pdev->dev, "Invalid hw trigger level\n");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/* Count trigger levels except the HW trip*/
+		if (!(pdata->trigger_type[i] == HW_TRIP))
 			trigger_levs++;
+	}
 
 	if (data->soc == SOC_ARCH_EXYNOS4210) {
 		/* Write temperature code for threshold */
@@ -165,7 +181,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 		writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
 	} else if (data->soc == SOC_ARCH_EXYNOS) {
 		/* Write temperature code for rising and falling threshold */
-		for (i = 0; i < trigger_levs; i++) {
+		for (i = 0;
+		i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
 			threshold_code = temp_to_code(data,
 						pdata->trigger_levels[i]);
 			if (threshold_code < 0) {
@@ -191,6 +208,24 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 		writel((reg->inten_rise_mask << reg->inten_rise_shift) |
 			(reg->inten_fall_mask << reg->inten_fall_shift),
 				data->base + reg->tmu_intclear);
+
+		/* if last threshold limit is also present */
+		i = pdata->max_trigger_level - 1;
+		if (pdata->trigger_levels[i] &&
+				(pdata->trigger_type[i] == HW_TRIP)) {
+			threshold_code = temp_to_code(data,
+						pdata->trigger_levels[i]);
+			if (threshold_code < 0) {
+				ret = threshold_code;
+				goto out;
+			}
+			rising_threshold |= threshold_code << 8 * i;
+			writel(rising_threshold,
+				data->base + reg->threshold_th0);
+			con = readl(data->base + reg->tmu_ctrl);
+			con |= (1 << reg->therm_trip_en_shift);
+			writel(con, data->base + reg->tmu_ctrl);
+		}
 	}
 out:
 	clk_disable(data->clk);
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 589a519..e7cb1cc 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -123,6 +123,7 @@ struct exynos_tmu_platform_data const exynos5250_default_tmu_data = {
 	.trigger_levels[0] = 85,
 	.trigger_levels[1] = 103,
 	.trigger_levels[2] = 110,
+	.trigger_levels[3] = 120,
 	.trigger_enable[0] = 1,
 	.trigger_enable[1] = 1,
 	.trigger_enable[2] = 1,
@@ -130,6 +131,7 @@ struct exynos_tmu_platform_data const exynos5250_default_tmu_data = {
 	.trigger_type[0] = THROTTLE_ACTIVE,
 	.trigger_type[1] = THROTTLE_ACTIVE,
 	.trigger_type[2] = SW_TRIP,
+	.trigger_type[3] = HW_TRIP,
 	.max_trigger_level = 4,
 	.gain = 8,
 	.reference_voltage = 16,
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index 0e2244f..4acf070 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -91,6 +91,8 @@
 #define EXYNOS_EMUL_DATA_MASK	0xFF
 #define EXYNOS_EMUL_ENABLE	0x1
 
+#define EXYNOS_MAX_TRIGGER_PER_REG	4
+
 #if defined(CONFIG_CPU_EXYNOS4210)
 extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data;
 #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux