Hi Kukjin,
On Thursday 06 of June 2013 12:49:23 Kukjin Kim wrote:
> As we discussed in mailing list, non-DT for EXYNOS SoCs will not be
> supported from v3.11. This patch removes regarding files for non-DT
> including board files and defconfig.
>
> Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> Cc: Tomasz Figa <t.figa@xxxxxxxxxxx>
> Cc: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> Cc: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> Cc: Arnd Bergmann <arnd@xxxxxxxx>
> Cc: Olof Johansson <olof@xxxxxxxxx>
> Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
> ---
>
> It's time to remove non-DT stuff for EXYNOS SoCs.
> If no objection on this, this will be sent to arm-soc in a couple of
> days.
I like it.
I will make sure that there are no regressions (although I don't see any
reason why there could be any, but just in case) on Exynos 4 on Monday at
work and give my Tested-by.
Best regards,
Tomasz
> - Kukjin
>
> arch/arm/configs/exynos4_defconfig | 68 --
> arch/arm/mach-exynos/Kconfig | 320 +------
> arch/arm/mach-exynos/Makefile | 26 -
> arch/arm/mach-exynos/common.c | 10 -
> arch/arm/mach-exynos/dev-ahci.c | 255 -----
> arch/arm/mach-exynos/dev-ohci.c | 52 --
> arch/arm/mach-exynos/dma.c | 322 -------
> arch/arm/mach-exynos/mach-armlex4210.c | 207 -----
> arch/arm/mach-exynos/mach-nuri.c | 1388
> ---------------------------- arch/arm/mach-exynos/mach-origen.c
> | 823 ----------------- arch/arm/mach-exynos/mach-smdk4x12.c |
> 396 --------
> arch/arm/mach-exynos/mach-smdkv310.c | 444 ---------
> arch/arm/mach-exynos/mach-universal_c210.c | 1159
> ----------------------- arch/arm/mach-exynos/pm_domains.c |
> 7 -
> arch/arm/mach-exynos/setup-fimc.c | 44 -
> arch/arm/mach-exynos/setup-fimd0.c | 43 -
> arch/arm/mach-exynos/setup-i2c1.c | 23 -
> arch/arm/mach-exynos/setup-i2c2.c | 23 -
> arch/arm/mach-exynos/setup-i2c3.c | 23 -
> arch/arm/mach-exynos/setup-i2c4.c | 23 -
> arch/arm/mach-exynos/setup-i2c5.c | 23 -
> arch/arm/mach-exynos/setup-i2c6.c | 23 -
> arch/arm/mach-exynos/setup-i2c7.c | 23 -
> arch/arm/mach-exynos/setup-keypad.c | 36 -
> arch/arm/mach-exynos/setup-sdhci-gpio.c | 152 ---
> arch/arm/mach-exynos/setup-spi.c | 45 -
> arch/arm/mach-exynos/setup-usb-phy.c | 223 -----
> 27 files changed, 1 insertion(+), 6180 deletions(-)
> delete mode 100644 arch/arm/configs/exynos4_defconfig
> delete mode 100644 arch/arm/mach-exynos/dev-ahci.c
> delete mode 100644 arch/arm/mach-exynos/dev-ohci.c
> delete mode 100644 arch/arm/mach-exynos/dma.c
> delete mode 100644 arch/arm/mach-exynos/mach-armlex4210.c
> delete mode 100644 arch/arm/mach-exynos/mach-nuri.c
> delete mode 100644 arch/arm/mach-exynos/mach-origen.c
> delete mode 100644 arch/arm/mach-exynos/mach-smdk4x12.c
> delete mode 100644 arch/arm/mach-exynos/mach-smdkv310.c
> delete mode 100644 arch/arm/mach-exynos/mach-universal_c210.c
> delete mode 100644 arch/arm/mach-exynos/setup-fimc.c
> delete mode 100644 arch/arm/mach-exynos/setup-fimd0.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c1.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c2.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c3.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c4.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c5.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c6.c
> delete mode 100644 arch/arm/mach-exynos/setup-i2c7.c
> delete mode 100644 arch/arm/mach-exynos/setup-keypad.c
> delete mode 100644 arch/arm/mach-exynos/setup-sdhci-gpio.c
> delete mode 100644 arch/arm/mach-exynos/setup-spi.c
> delete mode 100644 arch/arm/mach-exynos/setup-usb-phy.c
>
> diff --git a/arch/arm/configs/exynos4_defconfig
> b/arch/arm/configs/exynos4_defconfig deleted file mode 100644
> index bffe68e..0000000
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index ff18fc2..41fd73f 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -84,329 +84,11 @@ config SOC_EXYNOS5440
> help
> Enable EXYNOS5440 SoC support
>
> -config EXYNOS_ATAGS
> - bool "ATAGS based boot for EXYNOS (deprecated)"
> - depends on !ARCH_MULTIPLATFORM
> - depends on ATAGS
> - default y
> - help
> - The EXYNOS platform is moving towards being completely probed
> - through device tree. This enables support for board files using
> - the traditional ATAGS boot format.
> - Note that this option is not available for multiplatform builds.
> -
> -if EXYNOS_ATAGS
> -
> -config EXYNOS_DEV_DMA
> - bool
> - help
> - Compile in amba device definitions for DMA controller
> -
> -config EXYNOS4_DEV_AHCI
> - bool
> - help
> - Compile in platform device definitions for AHCI
> -
> -config EXYNOS4_SETUP_FIMD0
> - bool
> - help
> - Common setup code for FIMD0.
> -
> -config EXYNOS4_DEV_USB_OHCI
> - bool
> - help
> - Compile in platform device definition for USB OHCI
> -
> -config EXYNOS4_SETUP_I2C1
> - bool
> - help
> - Common setup code for i2c bus 1.
> -
> -config EXYNOS4_SETUP_I2C2
> - bool
> - help
> - Common setup code for i2c bus 2.
> -
> -config EXYNOS4_SETUP_I2C3
> - bool
> - help
> - Common setup code for i2c bus 3.
> -
> -config EXYNOS4_SETUP_I2C4
> - bool
> - help
> - Common setup code for i2c bus 4.
> -
> -config EXYNOS4_SETUP_I2C5
> - bool
> - help
> - Common setup code for i2c bus 5.
> -
> -config EXYNOS4_SETUP_I2C6
> - bool
> - help
> - Common setup code for i2c bus 6.
> -
> -config EXYNOS4_SETUP_I2C7
> - bool
> - help
> - Common setup code for i2c bus 7.
> -
> -config EXYNOS4_SETUP_KEYPAD
> - bool
> - help
> - Common setup code for keypad.
> -
> -config EXYNOS4_SETUP_SDHCI
> - bool
> - select EXYNOS4_SETUP_SDHCI_GPIO
> - help
> - Internal helper functions for EXYNOS4 based SDHCI systems.
> -
> -config EXYNOS4_SETUP_SDHCI_GPIO
> - bool
> - help
> - Common setup code for SDHCI gpio.
> -
> -config EXYNOS4_SETUP_FIMC
> - bool
> - help
> - Common setup code for the camera interfaces.
> -
> -config EXYNOS4_SETUP_USB_PHY
> - bool
> - help
> - Common setup code for USB PHY controller
> -
> -config EXYNOS_SETUP_SPI
> - bool
> - help
> - Common setup code for SPI GPIO configurations.
> -
> -# machine support
> -
> -if ARCH_EXYNOS4
> -
> -comment "EXYNOS4210 Boards"
> -
> -config MACH_SMDKC210
> - bool "SMDKC210"
> - select MACH_SMDKV310
> - help
> - Machine support for Samsung SMDKC210
> -
> -config MACH_SMDKV310
> - bool "SMDKV310"
> - select CPU_EXYNOS4210
> - select EXYNOS4_DEV_AHCI
> - select EXYNOS4_DEV_USB_OHCI
> - select EXYNOS4_SETUP_FIMD0
> - select EXYNOS4_SETUP_I2C1
> - select EXYNOS4_SETUP_KEYPAD
> - select EXYNOS4_SETUP_SDHCI
> - select EXYNOS4_SETUP_USB_PHY
> - select EXYNOS_DEV_DMA
> - select EXYNOS_DEV_SYSMMU
> - select S3C24XX_PWM
> - select S3C_DEV_HSMMC
> - select S3C_DEV_HSMMC1
> - select S3C_DEV_HSMMC2
> - select S3C_DEV_HSMMC3
> - select S3C_DEV_I2C1
> - select S3C_DEV_RTC
> - select S3C_DEV_USB_HSOTG
> - select S3C_DEV_WDT
> - select S5P_DEV_FIMC0
> - select S5P_DEV_FIMC1
> - select S5P_DEV_FIMC2
> - select S5P_DEV_FIMC3
> - select S5P_DEV_FIMD0
> - select S5P_DEV_G2D
> - select S5P_DEV_I2C_HDMIPHY
> - select S5P_DEV_JPEG
> - select S5P_DEV_MFC
> - select S5P_DEV_TV
> - select S5P_DEV_USB_EHCI
> - select SAMSUNG_DEV_BACKLIGHT
> - select SAMSUNG_DEV_KEYPAD
> - select SAMSUNG_DEV_PWM
> - help
> - Machine support for Samsung SMDKV310
> -
> -config MACH_ARMLEX4210
> - bool "ARMLEX4210"
> - select CPU_EXYNOS4210
> - select EXYNOS4_DEV_AHCI
> - select EXYNOS4_SETUP_SDHCI
> - select EXYNOS_DEV_DMA
> - select S3C_DEV_HSMMC
> - select S3C_DEV_HSMMC2
> - select S3C_DEV_HSMMC3
> - select S3C_DEV_RTC
> - select S3C_DEV_WDT
> - help
> - Machine support for Samsung ARMLEX4210 based on EXYNOS4210
> -
> -config MACH_UNIVERSAL_C210
> - bool "Mobile UNIVERSAL_C210 Board"
> - select CLKSRC_MMIO
> - select CLKSRC_SAMSUNG_PWM
> - select CPU_EXYNOS4210
> - select EXYNOS4_SETUP_FIMC
> - select EXYNOS4_SETUP_FIMD0
> - select EXYNOS4_SETUP_I2C1
> - select EXYNOS4_SETUP_I2C3
> - select EXYNOS4_SETUP_I2C5
> - select EXYNOS4_SETUP_SDHCI
> - select EXYNOS4_SETUP_USB_PHY
> - select EXYNOS_DEV_DMA
> - select EXYNOS_DEV_SYSMMU
> - select S3C_DEV_HSMMC
> - select S3C_DEV_HSMMC2
> - select S3C_DEV_HSMMC3
> - select S3C_DEV_I2C1
> - select S3C_DEV_I2C3
> - select S3C_DEV_I2C5
> - select S3C_DEV_USB_HSOTG
> - select S5P_DEV_CSIS0
> - select S5P_DEV_FIMC0
> - select S5P_DEV_FIMC1
> - select S5P_DEV_FIMC2
> - select S5P_DEV_FIMC3
> - select S5P_DEV_FIMD0
> - select S5P_DEV_G2D
> - select S5P_DEV_I2C_HDMIPHY
> - select S5P_DEV_JPEG
> - select S5P_DEV_MFC
> - select S5P_DEV_ONENAND
> - select S5P_DEV_TV
> - select S5P_GPIO_INT
> - select S5P_SETUP_MIPIPHY
> - help
> - Machine support for Samsung Mobile Universal S5PC210 Reference
> - Board.
> -
> -config MACH_NURI
> - bool "Mobile NURI Board"
> - select CPU_EXYNOS4210
> - select EXYNOS4_SETUP_FIMC
> - select EXYNOS4_SETUP_FIMD0
> - select EXYNOS4_SETUP_I2C1
> - select EXYNOS4_SETUP_I2C3
> - select EXYNOS4_SETUP_I2C5
> - select EXYNOS4_SETUP_I2C6
> - select EXYNOS4_SETUP_SDHCI
> - select EXYNOS4_SETUP_USB_PHY
> - select EXYNOS_DEV_DMA
> - select S3C_DEV_HSMMC
> - select S3C_DEV_HSMMC2
> - select S3C_DEV_HSMMC3
> - select S3C_DEV_I2C1
> - select S3C_DEV_I2C3
> - select S3C_DEV_I2C5
> - select S3C_DEV_I2C6
> - select S3C_DEV_RTC
> - select S3C_DEV_USB_HSOTG
> - select S3C_DEV_WDT
> - select S5P_DEV_CSIS0
> - select S5P_DEV_FIMC0
> - select S5P_DEV_FIMC1
> - select S5P_DEV_FIMC2
> - select S5P_DEV_FIMC3
> - select S5P_DEV_FIMD0
> - select S5P_DEV_G2D
> - select S5P_DEV_JPEG
> - select S5P_DEV_MFC
> - select S5P_DEV_USB_EHCI
> - select S5P_GPIO_INT
> - select S5P_SETUP_MIPIPHY
> - select SAMSUNG_DEV_ADC
> - select SAMSUNG_DEV_PWM
> - help
> - Machine support for Samsung Mobile NURI Board.
> -
> -config MACH_ORIGEN
> - bool "ORIGEN"
> - select CPU_EXYNOS4210
> - select EXYNOS4_DEV_USB_OHCI
> - select EXYNOS4_SETUP_FIMD0
> - select EXYNOS4_SETUP_SDHCI
> - select EXYNOS4_SETUP_USB_PHY
> - select EXYNOS_DEV_DMA
> - select EXYNOS_DEV_SYSMMU
> - select S3C24XX_PWM
> - select S3C_DEV_HSMMC
> - select S3C_DEV_HSMMC2
> - select S3C_DEV_RTC
> - select S3C_DEV_USB_HSOTG
> - select S3C_DEV_WDT
> - select S5P_DEV_FIMC0
> - select S5P_DEV_FIMC1
> - select S5P_DEV_FIMC2
> - select S5P_DEV_FIMC3
> - select S5P_DEV_FIMD0
> - select S5P_DEV_G2D
> - select S5P_DEV_I2C_HDMIPHY
> - select S5P_DEV_JPEG
> - select S5P_DEV_MFC
> - select S5P_DEV_TV
> - select S5P_DEV_USB_EHCI
> - select SAMSUNG_DEV_BACKLIGHT
> - select SAMSUNG_DEV_PWM
> - help
> - Machine support for ORIGEN based on Samsung EXYNOS4210
> -
> -comment "EXYNOS4212 Boards"
> -
> -config MACH_SMDK4212
> - bool "SMDK4212"
> - select EXYNOS4_SETUP_FIMD0
> - select EXYNOS4_SETUP_I2C1
> - select EXYNOS4_SETUP_I2C3
> - select EXYNOS4_SETUP_I2C7
> - select EXYNOS4_SETUP_KEYPAD
> - select EXYNOS4_SETUP_SDHCI
> - select EXYNOS4_SETUP_USB_PHY
> - select EXYNOS_DEV_DMA
> - select EXYNOS_DEV_SYSMMU
> - select S3C24XX_PWM
> - select S3C_DEV_HSMMC2
> - select S3C_DEV_HSMMC3
> - select S3C_DEV_I2C1
> - select S3C_DEV_I2C3
> - select S3C_DEV_I2C7
> - select S3C_DEV_RTC
> - select S3C_DEV_USB_HSOTG
> - select S3C_DEV_WDT
> - select S5P_DEV_FIMC0
> - select S5P_DEV_FIMC1
> - select S5P_DEV_FIMC2
> - select S5P_DEV_FIMC3
> - select S5P_DEV_FIMD0
> - select S5P_DEV_MFC
> - select SAMSUNG_DEV_BACKLIGHT
> - select SAMSUNG_DEV_KEYPAD
> - select SAMSUNG_DEV_PWM
> - select SOC_EXYNOS4212
> - help
> - Machine support for Samsung SMDK4212
> -
> -comment "EXYNOS4412 Boards"
> -
> -config MACH_SMDK4412
> - bool "SMDK4412"
> - select MACH_SMDK4212
> - select SOC_EXYNOS4412
> - help
> - Machine support for Samsung SMDK4412
> -endif
> -
> -endif
> -
> comment "Flattened Device Tree based board for EXYNOS SoCs"
>
> config MACH_EXYNOS4_DT
> bool "Samsung Exynos4 Machine using device tree"
> + default y
> depends on ARCH_EXYNOS4
> select ARM_AMBA
> select CLKSRC_OF
> diff --git a/arch/arm/mach-exynos/Makefile
> b/arch/arm/mach-exynos/Makefile index b09b027..9811f87 100644
> --- a/arch/arm/mach-exynos/Makefile
> +++ b/arch/arm/mach-exynos/Makefile
> @@ -32,16 +32,6 @@ AFLAGS_exynos-smc.o :=-Wa,-
march=armv7-a$(plus_sec)
>
> # machine support
>
> -obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o
> -obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
> -obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
> -obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
> -obj-$(CONFIG_MACH_NURI) += mach-nuri.o
> -obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
> -
> -obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
> -obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
> -
> obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
> obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
>
> @@ -49,21 +39,5 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-
exynos5-dt.o
>
> obj-y += dev-uart.o
> obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
> -obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
> -obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o
> -obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
>
> obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
> -obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
> -obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
> -obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
> -obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o
> -obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o
> -obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o
> -obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o
> -obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o
> -obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o
> -obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
> -obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
> -obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
> -obj-$(CONFIG_EXYNOS_SETUP_SPI) += setup-spi.o
> diff --git a/arch/arm/mach-exynos/common.c
> b/arch/arm/mach-exynos/common.c index 027c9e7..de7c7d3 100644
> --- a/arch/arm/mach-exynos/common.c
> +++ b/arch/arm/mach-exynos/common.c
> @@ -353,7 +353,6 @@ void __init exynos_init_late(void)
> exynos_pm_late_initcall();
> }
>
> -#ifdef CONFIG_OF
> int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
> int depth, void *data)
> {
> @@ -376,7 +375,6 @@ int __init exynos_fdt_map_chipid(unsigned long node,
> const char *uname, iotable_init(&iodesc, 1);
> return 1;
> }
> -#endif
>
> /*
> * exynos_map_io
> @@ -386,11 +384,9 @@ int __init exynos_fdt_map_chipid(unsigned long
> node, const char *uname,
>
> void __init exynos_init_io(struct map_desc *mach_desc, int size)
> {
> -#ifdef CONFIG_OF
> if (initial_boot_params)
> of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
> else
> -#endif
> iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
>
> if (mach_desc)
> @@ -473,10 +469,8 @@ void __init exynos_init_time(void)
> };
>
> if (of_have_populated_dt()) {
> -#ifdef CONFIG_OF
> of_clk_init(NULL);
> clocksource_of_init();
> -#endif
> } else {
> /* todo: remove after migrating legacy E4 platforms to dt
*/
> #ifdef CONFIG_ARCH_EXYNOS4
> @@ -515,10 +509,8 @@ void __init exynos4_init_irq(void)
>
> if (!of_have_populated_dt())
> gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST,
S5P_VA_GIC_CPU,
> gic_bank_offset, NULL); -#ifdef CONFIG_OF
> else
> irqchip_init();
> -#endif
>
> if (!of_have_populated_dt())
> combiner_init(S5P_VA_COMBINER_BASE, NULL,
> @@ -529,9 +521,7 @@ void __init exynos4_init_irq(void)
>
> void __init exynos5_init_irq(void)
> {
> -#ifdef CONFIG_OF
> irqchip_init();
> -#endif
> gic_arch_extn.irq_set_wake = s3c_irq_wake;
> }
>
> diff --git a/arch/arm/mach-exynos/dev-ahci.c
> b/arch/arm/mach-exynos/dev-ahci.c deleted file mode 100644
> index ce1aad3..0000000
> diff --git a/arch/arm/mach-exynos/dev-ohci.c
> b/arch/arm/mach-exynos/dev-ohci.c deleted file mode 100644
> index d5bc129..0000000
> diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
> deleted file mode 100644
> index 87e07d6..0000000
> diff --git a/arch/arm/mach-exynos/mach-armlex4210.c
> b/arch/arm/mach-exynos/mach-armlex4210.c deleted file mode 100644
> index 5f0f557..0000000
> diff --git a/arch/arm/mach-exynos/mach-nuri.c
> b/arch/arm/mach-exynos/mach-nuri.c deleted file mode 100644
> index 5c8b287..0000000
> diff --git a/arch/arm/mach-exynos/mach-origen.c
> b/arch/arm/mach-exynos/mach-origen.c deleted file mode 100644
> index 27f03ed..0000000
> diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c
> b/arch/arm/mach-exynos/mach-smdk4x12.c deleted file mode 100644
> index 2c8af96..0000000
> diff --git a/arch/arm/mach-exynos/mach-smdkv310.c
> b/arch/arm/mach-exynos/mach-smdkv310.c deleted file mode 100644
> index d95b8cf..0000000
> diff --git a/arch/arm/mach-exynos/mach-universal_c210.c
> b/arch/arm/mach-exynos/mach-universal_c210.c deleted file mode 100644
> index 74ddb2b..0000000
> diff --git a/arch/arm/mach-exynos/pm_domains.c
> b/arch/arm/mach-exynos/pm_domains.c index 9f1351d..beb946d 100644
> --- a/arch/arm/mach-exynos/pm_domains.c
> +++ b/arch/arm/mach-exynos/pm_domains.c
> @@ -84,7 +84,6 @@ static struct exynos_pm_domain PD = {
\
> }, \
> }
>
> -#ifdef CONFIG_OF
> static void exynos_add_device_to_domain(struct exynos_pm_domain *pd,
> struct device *dev)
> {
> @@ -193,12 +192,6 @@ static __init int exynos_pm_dt_parse_domains(void)
>
> return 0;
> }
> -#else
> -static __init int exynos_pm_dt_parse_domains(void)
> -{
> - return 0;
> -}
> -#endif /* CONFIG_OF */
>
> static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct
> platform_device *pdev, struct exynos_pm_domain *pd)
> diff --git a/arch/arm/mach-exynos/setup-fimc.c
> b/arch/arm/mach-exynos/setup-fimc.c deleted file mode 100644
> index 6a45078..0000000
> diff --git a/arch/arm/mach-exynos/setup-fimd0.c
> b/arch/arm/mach-exynos/setup-fimd0.c deleted file mode 100644
> index 5665bb4..0000000
> diff --git a/arch/arm/mach-exynos/setup-i2c1.c
> b/arch/arm/mach-exynos/setup-i2c1.c deleted file mode 100644
> index 8d2279c..0000000
> diff --git a/arch/arm/mach-exynos/setup-i2c2.c
> b/arch/arm/mach-exynos/setup-i2c2.c deleted file mode 100644
> index 0ed62fc..0000000
> diff --git a/arch/arm/mach-exynos/setup-i2c3.c
> b/arch/arm/mach-exynos/setup-i2c3.c deleted file mode 100644
> index 7787fd2..0000000
> diff --git a/arch/arm/mach-exynos/setup-i2c4.c
> b/arch/arm/mach-exynos/setup-i2c4.c deleted file mode 100644
> index edc847f..0000000
> diff --git a/arch/arm/mach-exynos/setup-i2c5.c
> b/arch/arm/mach-exynos/setup-i2c5.c deleted file mode 100644
> index d88af7f..0000000
> diff --git a/arch/arm/mach-exynos/setup-i2c6.c
> b/arch/arm/mach-exynos/setup-i2c6.c deleted file mode 100644
> index c590286..0000000
> diff --git a/arch/arm/mach-exynos/setup-i2c7.c
> b/arch/arm/mach-exynos/setup-i2c7.c deleted file mode 100644
> index 1bba755..0000000
> diff --git a/arch/arm/mach-exynos/setup-keypad.c
> b/arch/arm/mach-exynos/setup-keypad.c deleted file mode 100644
> index 7862bfb..0000000
> diff --git a/arch/arm/mach-exynos/setup-sdhci-gpio.c
> b/arch/arm/mach-exynos/setup-sdhci-gpio.c deleted file mode 100644
> index d5b98c8..0000000
> diff --git a/arch/arm/mach-exynos/setup-spi.c
> b/arch/arm/mach-exynos/setup-spi.c deleted file mode 100644
> index 4999829..0000000
> diff --git a/arch/arm/mach-exynos/setup-usb-phy.c
> b/arch/arm/mach-exynos/setup-usb-phy.c deleted file mode 100644
> index 6af4066..0000000
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
