On Thursday 16 of May 2013 10:12:32 Doug Anderson wrote:
> From: Prathyush K <prathyush.k@xxxxxxxxxxx>
>
> Add the irq_set_wake function for exynos pinctrl to configure the
> external interrupt wakeup mask register.
>
> [dianders: minor nit fixes; port to ToT]
>
> Signed-off-by: Prathyush K <prathyush.k@xxxxxxxxxxx>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> ---
> drivers/pinctrl/pinctrl-exynos.c | 45
> ++++++++++++++++++++++++++++-----------
> drivers/pinctrl/pinctrl-exynos.h | 3 ++-
> drivers/pinctrl/pinctrl-samsung.h | 2 ++
> 3 files changed, 37 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-exynos.c
> b/drivers/pinctrl/pinctrl-exynos.c index ac74281..3ebb2ff 100644
> --- a/drivers/pinctrl/pinctrl-exynos.c
> +++ b/drivers/pinctrl/pinctrl-exynos.c
> @@ -30,6 +30,8 @@
> #include <linux/spinlock.h>
> #include <linux/err.h>
>
> +#include <plat/pm.h>
> +
This is not going to work with CONFIG_MULTIPLATFORM.
Now this raises a question what is the preferred way to pass some data
from generic driver to platform code.
I would suggest adding a function called exynos_pinctrl_get_eintmask() (or
whatever) that would return the wake-up mask configured in the driver and
then modify platform code to use it.
> #include "pinctrl-samsung.h"
> #include "pinctrl-exynos.h"
>
> @@ -326,6 +328,24 @@ static int exynos_wkup_irq_set_type(struct irq_data
> *irqd, unsigned int type) return 0;
> }
>
> +static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int
> state) +{
> + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
> + const int eint_num = bank->eint_base + irqd->hwirq;
> + unsigned long bit = 1L << eint_num;
> +
> + pr_info("wake %s for eint %d / %s[%ld]\n",
> + state ? "enabled" : "disabled",
> + eint_num, bank->name, irqd->hwirq);
> +
> + if (!state)
> + s3c_irqwake_eintmask |= bit;
> + else
> + s3c_irqwake_eintmask &= ~bit;
> +
> + return 0;
> +}
> +
> /*
> * irq_chip for wakeup interrupts
> */
> @@ -335,6 +355,7 @@ static struct irq_chip exynos_wkup_irq_chip = {
> .irq_mask = exynos_wkup_irq_mask,
> .irq_ack = exynos_wkup_irq_ack,
> .irq_set_type = exynos_wkup_irq_set_type,
> + .irq_set_wake = exynos_wkup_irq_set_wake,
> };
>
> /* interrupt handler for wakeup interrupts 0..15 */
> @@ -543,10 +564,10 @@ static struct samsung_pin_bank
> exynos4210_pin_banks1[] = { EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
> EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
> EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00, 0),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04, 8),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08, 16),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c, 24),
> };
>
> /* pin banks of exynos4210 pin-controller 2 */
> @@ -629,10 +650,10 @@ static struct samsung_pin_bank
> exynos4x12_pin_banks1[] = { EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
> EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
> EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00, 0),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04, 8),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08, 16),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c, 24),
> };
>
> /* pin banks of exynos4x12 pin-controller 2 */
> @@ -724,10 +745,10 @@ static struct samsung_pin_bank
> exynos5250_pin_banks0[] = { EXYNOS_PIN_BANK_EINTN(8, 0x220, "gpy4"),
> EXYNOS_PIN_BANK_EINTN(8, 0x240, "gpy5"),
> EXYNOS_PIN_BANK_EINTN(8, 0x260, "gpy6"),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
> - EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00, 0),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04, 8),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08, 16),
> + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c, 24),
> };
>
> /* pin banks of exynos5250 pin-controller 1 */
> diff --git a/drivers/pinctrl/pinctrl-exynos.h
> b/drivers/pinctrl/pinctrl-exynos.h index 9b1f77a..d98e9ff 100644
> --- a/drivers/pinctrl/pinctrl-exynos.h
> +++ b/drivers/pinctrl/pinctrl-exynos.h
> @@ -65,13 +65,14 @@
> .name = id \
> }
>
> -#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs) \
> +#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs, base)\
> { \
> .type = &bank_type_alive, \
> .pctl_offset = reg, \
> .nr_pins = pins, \
> .eint_type = EINT_TYPE_WKUP, \
> .eint_offset = offs, \
> + .eint_base = base, \
I can't look at my patch at the moment, but I think I have managed to get
EINT index without adding this extra field.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
