Hey Amit,
On 26-03-2013 07:33, Amit Daniel Kachhap wrote:
This code modifies the thermal driver to have multiple thermal zone
support by replacing the global thermal zone varibale with device data
s/varibale/variable
member of thermal_zone_device.
Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
I understand the idea of your patch but I also see that you do at least
to major changes. One is to set the thermal_device.devdata. The second
is to split your internal reference private_data into driver_data and
pzone_data. Is it possible to split this patch into two, one per
modification? So it is easier to review your changes?
---
drivers/thermal/exynos_thermal.c | 65 ++++++++++++++++++++++---------------
1 files changed, 39 insertions(+), 26 deletions(-)
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
index 1cd7837..dc9b91b 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -148,7 +148,8 @@ struct thermal_sensor_conf {
int (*write_emul_temp)(void *drv_data, unsigned long temp);
struct thermal_trip_point_conf trip_data;
struct thermal_cooling_conf cooling_data;
- void *private_data;
+ void *driver_data;
+ void *pzone_data;
};
struct exynos_thermal_zone {
@@ -161,14 +162,14 @@ struct exynos_thermal_zone {
bool bind;
};
-static struct exynos_thermal_zone *th_zone;
-static void exynos_unregister_thermal(void);
+static void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf);
static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
/* Get mode callback functions for thermal zone */
static int exynos_get_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode *mode)
{
+ struct exynos_thermal_zone *th_zone = thermal->devdata;
if (th_zone)
*mode = th_zone->mode;
return 0;
@@ -178,25 +179,26 @@ static int exynos_get_mode(struct thermal_zone_device *thermal,
static int exynos_set_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode mode)
{
- if (!th_zone->therm_dev) {
+ struct exynos_thermal_zone *th_zone = thermal->devdata;
+ if (!th_zone) {
pr_notice("thermal zone not registered\n");
return 0;
}
- mutex_lock(&th_zone->therm_dev->lock);
+ mutex_lock(&thermal->lock);
if (mode == THERMAL_DEVICE_ENABLED &&
!th_zone->sensor_conf->trip_data.trigger_falling)
- th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
+ thermal->polling_delay = IDLE_INTERVAL;
else
- th_zone->therm_dev->polling_delay = 0;
+ thermal->polling_delay = 0;
- mutex_unlock(&th_zone->therm_dev->lock);
+ mutex_unlock(&thermal->lock);
th_zone->mode = mode;
- thermal_zone_device_update(th_zone->therm_dev);
+ thermal_zone_device_update(thermal);
pr_info("thermal polling set for duration=%d msec\n",
- th_zone->therm_dev->polling_delay);
+ thermal->polling_delay);
return 0;
}
@@ -223,6 +225,8 @@ static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
unsigned long *temp)
{
+ struct exynos_thermal_zone *th_zone = thermal->devdata;
+
if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
return -EINVAL;
@@ -269,6 +273,7 @@ static int exynos_bind(struct thermal_zone_device *thermal,
{
int ret = 0, i, tab_size, level;
struct freq_clip_table *tab_ptr, *clip_data;
+ struct exynos_thermal_zone *th_zone = thermal->devdata;
struct thermal_sensor_conf *data = th_zone->sensor_conf;
tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
@@ -315,6 +320,7 @@ static int exynos_unbind(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev)
{
int ret = 0, i, tab_size;
+ struct exynos_thermal_zone *th_zone = thermal->devdata;
struct thermal_sensor_conf *data = th_zone->sensor_conf;
if (th_zone->bind == false)
@@ -357,13 +363,14 @@ static int exynos_unbind(struct thermal_zone_device *thermal,
static int exynos_get_temp(struct thermal_zone_device *thermal,
unsigned long *temp)
{
+ struct exynos_thermal_zone *th_zone = thermal->devdata;
void *data;
if (!th_zone->sensor_conf) {
pr_info("Temperature sensor not initialised\n");
return -EINVAL;
}
- data = th_zone->sensor_conf->private_data;
+ data = th_zone->sensor_conf->driver_data;
*temp = th_zone->sensor_conf->read_temperature(data);
/* convert the temperature into millicelsius */
*temp = *temp * MCELSIUS;
@@ -376,12 +383,13 @@ static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
{
void *data;
int ret = -EINVAL;
+ struct exynos_thermal_zone *th_zone = thermal->devdata;
if (!th_zone->sensor_conf) {
pr_info("Temperature sensor not initialised\n");
return -EINVAL;
}
- data = th_zone->sensor_conf->private_data;
+ data = th_zone->sensor_conf->driver_data;
if (th_zone->sensor_conf->write_emul_temp)
ret = th_zone->sensor_conf->write_emul_temp(data, temp);
return ret;
@@ -391,7 +399,7 @@ static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
static int exynos_get_trend(struct thermal_zone_device *thermal,
int trip, enum thermal_trend *trend)
{
- int ret;
+ int ret = 0;
unsigned long trip_temp;
ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
@@ -403,7 +411,7 @@ static int exynos_get_trend(struct thermal_zone_device *thermal,
else
*trend = THERMAL_TREND_DROP_FULL;
- return 0;
+ return ret;
}
/* Operation callback functions for thermal zone */
static struct thermal_zone_device_ops const exynos_dev_ops = {
@@ -423,11 +431,12 @@ static struct thermal_zone_device_ops const exynos_dev_ops = {
* This function may be called from interrupt based temperature sensor
* when threshold is changed.
*/
-static void exynos_report_trigger(void)
+static void exynos_report_trigger(struct thermal_sensor_conf *conf)
{
unsigned int i;
char data[10];
char *envp[] = { data, NULL };
+ struct exynos_thermal_zone *th_zone = conf->pzone_data;
if (!th_zone || !th_zone->therm_dev)
return;
@@ -468,6 +477,7 @@ static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
{
int ret;
struct cpumask mask_val;
+ struct exynos_thermal_zone *th_zone;
if (!sensor_conf || !sensor_conf->read_temperature) {
pr_err("Temperature sensor not initialised\n");
@@ -489,7 +499,7 @@ static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
th_zone->cool_dev_size++;
th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
- EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
+ EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0,
sensor_conf->trip_data.trigger_falling ?
0 : IDLE_INTERVAL);
@@ -499,20 +509,22 @@ static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
goto err_unregister;
}
th_zone->mode = THERMAL_DEVICE_ENABLED;
+ sensor_conf->pzone_data = th_zone;
pr_info("Exynos: Kernel Thermal management registered\n");
return 0;
err_unregister:
- exynos_unregister_thermal();
+ exynos_unregister_thermal(sensor_conf);
return ret;
}
/* Un-Register with the in-kernel thermal management */
-static void exynos_unregister_thermal(void)
+static void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf)
{
int i;
+ struct exynos_thermal_zone *th_zone = sensor_conf->pzone_data;
if (!th_zone)
return;
@@ -774,12 +786,18 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
{ return -EINVAL; }
#endif/*CONFIG_THERMAL_EMULATION*/
+static struct thermal_sensor_conf exynos_sensor_conf = {
+ .name = "exynos-therm",
+ .read_temperature = (int (*)(void *))exynos_tmu_read,
+ .write_emul_temp = exynos_tmu_set_emulation,
+};
+
Assuming you have only one exynos_sensor_conf and this is the parameter
for each call to exynos_register_thermal, if you plan to add support to
different pzone_data, then the above needs to be allocated. Or there is
no point in having this.
static void exynos_tmu_work(struct work_struct *work)
{
struct exynos_tmu_data *data = container_of(work,
struct exynos_tmu_data, irq_work);
- exynos_report_trigger();
+ exynos_report_trigger(&exynos_sensor_conf);
mutex_lock(&data->lock);
clk_enable(data->clk);
if (data->soc == SOC_ARCH_EXYNOS)
@@ -804,11 +822,6 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id)
return IRQ_HANDLED;
}
-static struct thermal_sensor_conf exynos_sensor_conf = {
- .name = "exynos-therm",
- .read_temperature = (int (*)(void *))exynos_tmu_read,
- .write_emul_temp = exynos_tmu_set_emulation,
-};
#if defined(CONFIG_CPU_EXYNOS4210)
static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
@@ -987,7 +1000,7 @@ static int exynos_tmu_probe(struct platform_device *pdev)
exynos_tmu_control(pdev, true);
/* Register the sensor with thermal management interface */
- (&exynos_sensor_conf)->private_data = data;
+ (&exynos_sensor_conf)->driver_data = data;
exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en +
pdata->trigger_level1_en + pdata->trigger_level2_en +
pdata->trigger_level3_en;
@@ -1026,7 +1039,7 @@ static int exynos_tmu_remove(struct platform_device *pdev)
exynos_tmu_control(pdev, false);
- exynos_unregister_thermal();
+ exynos_unregister_thermal(&exynos_sensor_conf);
clk_put(data->clk);
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
