On Tue, Mar 26, 2013 at 07:59:56PM +0530, Prasanna Kumar wrote: > From: Jaemin Yoo <jmin.yoo@xxxxxxxxxxx> > > SMBus read and write are supported by the emulation layer of i2c > framework if the controller doesn't have SMBus features. > > I2C_M_RECV_LEN flag is used to let i2c drivers know rx length is not > yet determined but will be read to the first byte in rx buffer. > > s3c2410 doesn't handle this flag. So only one byte is read from slave. > There fore following two features are added to the driver code. > > 1. skip rx length check if I2C_M_RECV_LEN is set and the length is 1. > 2. add actual bytes to the rx length after reading first bytes if > I2C_M_RECV_LEN. > > I2C_M_RECV_LEN is only set for SMBus command. So this code does not > affect legacy codes which only use i2c command for s3c2410. > > Signed-off-by: Jaemin Yoo <jmin.yoo@xxxxxxxxxxx> > Tested-by: Prasanna Kumar <prasanna.ps@xxxxxxxxxxx> Applied to for-next, thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |