Quoting Tushar Behera (2013-04-02 01:20:40)
> In legacy setup, sclk_mmc{0,1,2,3} used PRE_RATIO bit-field (8-bit wide)
> instead of RATIO bit-field (4-bit wide) for dividing clock rate.
>
> With current common clock setup, we are using RATIO bit-field which
> is creating FIFO read errors while accessing eMMC. Changing over to
> use PRE_RATIO bit-field fixes this issue.
>
> dwmmc_exynos 12200000.dwmmc0: data FIFO error (status=00008020)
> mmcblk0: error -5 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0
> end_request: I/O error, dev mmcblk0, sector 1
>
> Signed-off-by: Tushar Behera <tushar.behera@xxxxxxxxxx>
> CC: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
I guess this will be applied through the samsung tree, so:
Acked-by: Mike Turquette <mturquette@xxxxxxxxxx>
> ---
>
> Based on Kukjin's for-next branch.
> commit d58f6a153f40 ("Merge branch 'next/clk-exynos-2' into for-next")
>
> drivers/clk/samsung/clk-exynos5250.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
> index 1152125..2c46fbd 100644
> --- a/drivers/clk/samsung/clk-exynos5250.c
> +++ b/drivers/clk/samsung/clk-exynos5250.c
> @@ -274,10 +274,10 @@ struct samsung_div_clock exynos5250_div_clks[] __initdata = {
> DIV(none, "div_pcm0", "sclk_audio0", DIV_MAU, 4, 8),
> DIV(none, "div_sata", "mout_sata", DIV_FSYS0, 20, 4),
> DIV(none, "div_usb3", "mout_usb3", DIV_FSYS0, 24, 4),
> - DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
> - DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
> - DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
> - DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 16, 4),
> + DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 8, 8),
> + DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 24, 8),
> + DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 8, 8),
> + DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 24, 8),
> DIV(none, "div_uart0", "mout_uart0", DIV_PERIC0, 0, 4),
> DIV(none, "div_uart1", "mout_uart1", DIV_PERIC0, 4, 4),
> DIV(none, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4),
> --
> 1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
