With device core now able to setup the default pin configuration,
the pin configuration code based on the deprecated Samsung specific
gpio bindings is removed.
Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
Tested-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
Hi Doug, Seungwon,
I apologize for the delaying in following up on the review comment.
The setup_bus callback support has been removed in this patch. I did
intend to retain the support for setup_bus callback in the previous
version of this patch since any new platform that might use this
driver and need such a callback would have this callback ready for
use. But it seems removing the setup_bus callback is preferred, so
I am fine with it.
Thomas.
drivers/mmc/host/dw_mmc-exynos.c | 38 --------------------------------------
drivers/mmc/host/dw_mmc.c | 14 +-------------
drivers/mmc/host/dw_mmc.h | 3 ---
3 files changed, 1 insertions(+), 54 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 72fd0f2..467d043 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -152,43 +152,6 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host)
return 0;
}
-static int dw_mci_exynos_setup_bus(struct dw_mci *host,
- struct device_node *slot_np, u8 bus_width)
-{
- int idx, gpio, ret;
-
- if (!slot_np)
- return -EINVAL;
-
- /* cmd + clock + bus-width pins */
- for (idx = 0; idx < NUM_PINS(bus_width); idx++) {
- gpio = of_get_gpio(slot_np, idx);
- if (!gpio_is_valid(gpio)) {
- dev_err(host->dev, "invalid gpio: %d\n", gpio);
- return -EINVAL;
- }
-
- ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus");
- if (ret) {
- dev_err(host->dev, "gpio [%d] request failed\n", gpio);
- return -EBUSY;
- }
- }
-
- if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
- return 0;
-
- gpio = of_get_named_gpio(slot_np, "samsung,cd-pinmux-gpio", 0);
- if (gpio_is_valid(gpio)) {
- if (devm_gpio_request(host->dev, gpio, "dw-mci-cd"))
- dev_err(host->dev, "gpio [%d] request failed\n", gpio);
- } else {
- dev_info(host->dev, "cd gpio not available");
- }
-
- return 0;
-}
-
/* Exynos5250 controller specific capabilities */
static unsigned long exynos5250_dwmmc_caps[4] = {
MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
@@ -205,7 +168,6 @@ static const struct dw_mci_drv_data exynos5250_drv_data = {
.prepare_command = dw_mci_exynos_prepare_command,
.set_ios = dw_mci_exynos_set_ios,
.parse_dt = dw_mci_exynos_parse_dt,
- .setup_bus = dw_mci_exynos_setup_bus,
};
static const struct of_device_id dw_mci_exynos_match[] = {
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 9834221..adb1b7d 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1878,7 +1878,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
struct mmc_host *mmc;
struct dw_mci_slot *slot;
const struct dw_mci_drv_data *drv_data = host->drv_data;
- int ctrl_id, ret;
+ int ctrl_id;
u8 bus_width;
mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
@@ -1935,14 +1935,6 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
else
bus_width = 1;
- if (drv_data && drv_data->setup_bus) {
- struct device_node *slot_np;
- slot_np = dw_mci_of_find_slot_node(host->dev, slot->id);
- ret = drv_data->setup_bus(host, slot_np, bus_width);
- if (ret)
- goto err_setup_bus;
- }
-
switch (bus_width) {
case 8:
mmc->caps |= MMC_CAP_8_BIT_DATA;
@@ -2006,10 +1998,6 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
queue_work(host->card_workqueue, &host->card_work);
return 0;
-
-err_setup_bus:
- mmc_free_host(mmc);
- return -EINVAL;
}
static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 53b8fd9..0b74189 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -190,7 +190,6 @@ extern int dw_mci_resume(struct dw_mci *host);
* @prepare_command: handle CMD register extensions.
* @set_ios: handle bus specific extensions.
* @parse_dt: parse implementation specific device tree properties.
- * @setup_bus: initialize io-interface
*
* Provide controller implementation specific extensions. The usage of this
* data structure is fully optional and usage of each member in this structure
@@ -203,7 +202,5 @@ struct dw_mci_drv_data {
void (*prepare_command)(struct dw_mci *host, u32 *cmdr);
void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
int (*parse_dt)(struct dw_mci *host);
- int (*setup_bus)(struct dw_mci *host,
- struct device_node *slot_np, u8 bus_width);
};
#endif /* _DW_MMC_H_ */
--
1.6.6.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
