Re: [PATCH] USB: ehci-s5p: Fix phy reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Alexander,

On Tue, Mar 12, 2013 at 6:09 PM, Alexander Graf <agraf@xxxxxxx> wrote:
> -       err = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "ehci_vbus_gpio");
> -       if (err)
> +       /* reset pulls the line down, then up again */
> +       err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, "ehci_vbus_gpio");
> +       if (err) {
>                 dev_err(&pdev->dev, "can't request ehci vbus gpio %d", gpio);
> +               return;
> +       }
> +       mdelay(1);
> +       __gpio_set_value(gpio, 1);
> +       gpio_free(gpio);

Freeing the gpio is a little on the iffy side since you actually care
about keeping the value.  Perhaps you can change this to
devm_gpio_request_one() and avoid the free?  I was about to submit a
patch to do just that (since otherwise you run into trouble if you
ever defer the probe) but then ran across your patch.

Thanks!

-Doug
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux