Hi Thomas,
On Wednesday, March 06, 2013, Thomas Abraham wrote:
> With device core now able to setup the default pin configuration,
> the pin configuration code based on the deprecated Samsung specific
> gpio bindings is removed.
'setup_bus' callback is still useful in dw_mci_drv_data?
Considering the purpose, it would be good to remove.
And, could you change commit prefix for consistency?
dwmmc -> dw_mmc
Thanks,
Seungwon Jeon
>
> Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
> ---
> drivers/mmc/host/dw_mmc-exynos.c | 38 --------------------------------------
> 1 files changed, 0 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
> index 72fd0f2..467d043 100644
> --- a/drivers/mmc/host/dw_mmc-exynos.c
> +++ b/drivers/mmc/host/dw_mmc-exynos.c
> @@ -152,43 +152,6 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host)
> return 0;
> }
>
> -static int dw_mci_exynos_setup_bus(struct dw_mci *host,
> - struct device_node *slot_np, u8 bus_width)
> -{
> - int idx, gpio, ret;
> -
> - if (!slot_np)
> - return -EINVAL;
> -
> - /* cmd + clock + bus-width pins */
> - for (idx = 0; idx < NUM_PINS(bus_width); idx++) {
> - gpio = of_get_gpio(slot_np, idx);
> - if (!gpio_is_valid(gpio)) {
> - dev_err(host->dev, "invalid gpio: %d\n", gpio);
> - return -EINVAL;
> - }
> -
> - ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus");
> - if (ret) {
> - dev_err(host->dev, "gpio [%d] request failed\n", gpio);
> - return -EBUSY;
> - }
> - }
> -
> - if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
> - return 0;
> -
> - gpio = of_get_named_gpio(slot_np, "samsung,cd-pinmux-gpio", 0);
> - if (gpio_is_valid(gpio)) {
> - if (devm_gpio_request(host->dev, gpio, "dw-mci-cd"))
> - dev_err(host->dev, "gpio [%d] request failed\n", gpio);
> - } else {
> - dev_info(host->dev, "cd gpio not available");
> - }
> -
> - return 0;
> -}
> -
> /* Exynos5250 controller specific capabilities */
> static unsigned long exynos5250_dwmmc_caps[4] = {
> MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
> @@ -205,7 +168,6 @@ static const struct dw_mci_drv_data exynos5250_drv_data = {
> .prepare_command = dw_mci_exynos_prepare_command,
> .set_ios = dw_mci_exynos_set_ios,
> .parse_dt = dw_mci_exynos_parse_dt,
> - .setup_bus = dw_mci_exynos_setup_bus,
> };
>
> static const struct of_device_id dw_mci_exynos_match[] = {
> --
> 1.6.6.rc2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
