This patch adds dma maxburst size initialization. The maxburst should be set by MODE_CFGn.DMA_TYPE, because the pl330 dma driver supports burst mode. Signed-off-by: Hyeonkook Kim <hk619.kim@xxxxxxxxxxx> --- drivers/spi/spi-s3c64xx.c | 18 ++++++++++++++++++ 1 files changed, 18 insertions(+), 0 deletions(-) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index e862ab8..5e6cafe 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -287,10 +287,20 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma, struct s3c64xx_spi_driver_data *sdd; struct samsung_dma_prep info; struct samsung_dma_config config; + void __iomem *regs; + unsigned int mode_cfg; if (dma->direction == DMA_DEV_TO_MEM) { sdd = container_of((void *)dma, struct s3c64xx_spi_driver_data, rx_dma); + + regs = sdd->regs; + mode_cfg = readl(regs + S3C64XX_SPI_MODE_CFG); + if (mode_cfg & S3C64XX_SPI_MODE_4BURST) + config.maxburst = 4; + else + config.maxburst = 1; + config.direction = sdd->rx_dma.direction; config.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA; config.width = sdd->cur_bpw / 8; @@ -298,6 +308,14 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma, } else { sdd = container_of((void *)dma, struct s3c64xx_spi_driver_data, tx_dma); + + regs = sdd->regs; + mode_cfg = readl(regs + S3C64XX_SPI_MODE_CFG); + if (mode_cfg & S3C64XX_SPI_MODE_4BURST) + config.maxburst = 4; + else + config.maxburst = 1; + config.direction = sdd->tx_dma.direction; config.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA; config.width = sdd->cur_bpw / 8; -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html