Please ignore the unfinished previous mail.
On 13 February 2013 08:18, Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx> wrote:
> On 13 February 2013 02:37, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>> On Wed, Jan 23, 2013 at 04:58:06AM -0000, Naveen Krishna Chatradhi wrote:
>>> This patch add an ADC IP found on EXYNOS5 series socs from Samsung.
>>> Also adds the Documentation for device tree bindings.
>>>
>>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
>>>
>>> ---
>>> Changes since v1:
>>>
>>> 1. Fixed comments from Lars
>>> 2. Added support for ADC on EXYNOS5410
>>>
>>> Changes since v2:
>>>
>>> 1. Changed the instance name for (struct iio_dev *) to indio_dev
>>> 2. Changed devm_request_irq to request_irq
>>>
>>> Few doubts regarding the mappings and child device handling.
>>> Kindly, suggest me better methods.
>>>
>>> .../bindings/arm/samsung/exynos5-adc.txt | 37 ++
>>> drivers/iio/adc/Kconfig | 7 +
>>> drivers/iio/adc/Makefile | 1 +
>>> drivers/iio/adc/exynos5_adc.c | 464 ++++++++++++++++++++
>>> 4 files changed, 509 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>>> create mode 100644 drivers/iio/adc/exynos5_adc.c
>>>
>>> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>>> new file mode 100644
>>> index 0000000..9a5b515
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos5-adc.txt
>>> @@ -0,0 +1,37 @@
>>> +Samsung Exynos5 Analog to Digital Converter bindings
>>> +
>>> +Required properties:
>>> +- compatible: Must be "samsung,exynos5250-adc" for exynos5250 controllers.
>>> +- reg: Contains ADC register address range (base address and
>>> + length).
>>> +- interrupts: Contains the interrupt information for the timer. The
>>> + format is being dependent on which interrupt controller
>>> + the Samsung device uses.
>>> +
>>> +Note: child nodes can be added for auto probing from device tree.
>>> +
>>> +Example: adding device info in dtsi file
>>> +
>>> +adc@12D10000 {
>>> + compatible = "samsung,exynos5250-adc";
>>> + reg = <0x12D10000 0x100>;
>>> + interrupts = <0 106 0>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> +};
>>> +
>>> +
>>> +Example: Adding child nodes in dts file
>>> +
>>> +adc@12D10000 {
>>> +
>>> + /* NTC thermistor is a hwmon device */
>>> + ncp15wb473@0 {
>>> + compatible = "ntc,ncp15wb473";
>>> + reg = <0x0>;
>>> + pullup-uV = <1800000>;
>>> + pullup-ohm = <47000>;
>>> + pulldown-ohm = <0>;
>>> + };
>>> +};
>>
>> How about:
>>
>> adc: adc@12D10000 {
>> compatible = "samsung,exynos5250-adc";
>> reg = <0x12D10000 0x100>;
>> interrupts = <0 106 0>;
>> #io-channel-cells = <1>;
>> };
>>
>> ...
>>
>> ncp15wb473@0 {
>> compatible = "ntc,ncp15wb473";
>> reg = <0x0>; /* is this needed ? */
>> io-channels = <&adc 0>;
>> io-channel-names = "adc";
>> pullup-uV = <1800000>; /* uV or uv ? */
>> pullup-ohm = <47000>;
>> pulldown-ohm = <0>;
>> };
>>
>> The ncp15wb473 driver would then use either iio_channel_get_all() to get the iio
>> channel list or, if it only supports one adc channel per instance, iio_channel_get().
>>
>> In that context, it would probably make sense to rework the ntc_thermistor
>> driver to support both DT as well as direct instantiation using access functions
>> and platform data (as it does today).
>>
>> Also see https://patchwork.kernel.org/patch/2112171/.
Hello Guenter,
I've rebase my adc driver on top of your (OF for IIO patch)
My setup is like the below one. kindly, help me find the right device
tree node params
One ADC controller with 8 channels,
4 NTC thermistors are connected to channel 3, 4, 5 and 6 of ADC respectively
ADC ch - 0
ADC ch - 1
ADC ch - 2
ADC ch - 3 ------------------NTC
ADC ch - 4 ------------------NTC
ADC ch - 5 ------------------NTC
ADC ch - 6 ------------------NTC
ADC ch - 7
I've started off with something like this.
adc0: adc@12D10000 {
compatible = "samsung,exynos5250-adc";
reg = <0x12D10000 0x100>;
interrupts = <0 106 0>;
#io-channel-cells = <1>;
};
adc0: adc@12D10000 {
vdd-supply = <&buck5_reg>;
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
io-channels = <&adc0 3>;
io-channel-names = "adc3";
pullup-uV = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
id = <3>;
};
ncp15wb473@1 {
compatible = "ntc,ncp15wb473";
pullup-uV = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc0 4>;
io-channel-names = "adc4";
id = <4>;
};
ncp15wb473@2 {
compatible = "ntc,ncp15wb473";
pullup-uV = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc0 5>;
io-channel-names = "adc5";
id = <5>;
};
ncp15wb473@3 {
compatible = "ntc,ncp15wb473";
pullup-uV = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc0 6>;
io-channel-names = "adc6";
id = <6>;
};
};
ADC driver will use of_platform_populate() to populate the child nodes
(ntc thermistors in my case)
I've modified the NTC driver to support DT. in probe
chan = iio_channel_get(&pdev->dev, "adcX");
and using "id" field to use respective ADC channel to do the raw_read()
Issue:
1. I get weird device names for thermistors starting from ncp15wb473.2
to ncp15wb473.5
2. ADC doesn't looks like creating valid channels
Any clues please
>>
>> Thanks,
>> Guenter
> Yes Guenter, I will rebase and submit the ADC driver based on your patch set.
>>
>>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>>> index fe822a1..33ceabf 100644
>>> --- a/drivers/iio/adc/Kconfig
>>> +++ b/drivers/iio/adc/Kconfig
>>> @@ -91,6 +91,13 @@ config AT91_ADC
>>> help
>>> Say yes here to build support for Atmel AT91 ADC.
>>>
>>> +config EXYNOS5_ADC
>>> + bool "Exynos5 ADC driver support"
>>> + help
>>> + Core support for the ADC block found in the Samsung EXYNOS5 series
>>> + of SoCs for drivers such as the touchscreen and hwmon to use to share
>>> + this resource.
>>> +
>>> config LP8788_ADC
>>> bool "LP8788 ADC driver"
>>> depends on MFD_LP8788
>>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>>> index 2d5f100..5b4a4f6 100644
>>> --- a/drivers/iio/adc/Makefile
>>> +++ b/drivers/iio/adc/Makefile
>>> @@ -10,6 +10,7 @@ obj-$(CONFIG_AD7791) += ad7791.o
>>> obj-$(CONFIG_AD7793) += ad7793.o
>>> obj-$(CONFIG_AD7887) += ad7887.o
>>> obj-$(CONFIG_AT91_ADC) += at91_adc.o
>>> +obj-$(CONFIG_EXYNOS5_ADC) += exynos5_adc.o
>>> obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
>>> obj-$(CONFIG_MAX1363) += max1363.o
>>> obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
>>> diff --git a/drivers/iio/adc/exynos5_adc.c b/drivers/iio/adc/exynos5_adc.c
>>> new file mode 100644
>>> index 0000000..8982675
>>> --- /dev/null
>>> +++ b/drivers/iio/adc/exynos5_adc.c
>>> @@ -0,0 +1,464 @@
>>> +/*
>>> + * exynos5_adc.c - Support for ADC in EXYNOS5 SoCs
>>> + *
>>> + * 8 ~ 10 channel, 10/12-bit ADC
>>> + *
>>> + * Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License
>>> + * along with this program; if not, write to the Free Software
>>> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>>> + */
>>> +
>>> +#include <linux/module.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/io.h>
>>> +#include <linux/clk.h>
>>> +#include <linux/completion.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_irq.h>
>>> +#include <linux/regulator/consumer.h>
>>> +#include <linux/of_platform.h>
>>> +
>>> +#include <linux/iio/iio.h>
>>> +#include <linux/iio/machine.h>
>>> +#include <linux/iio/driver.h>
>>> +
>>> +enum adc_version {
>>> + ADC_V1,
>>> + ADC_V2
>>> +};
>>> +
>>> +/* EXYNOS5250 ADC_V1 registers definitions */
>>> +#define ADC_V1_CON(x) ((x) + 0x00)
>>> +#define ADC_V1_DLY(x) ((x) + 0x08)
>>> +#define ADC_V1_DATX(x) ((x) + 0x0C)
>>> +#define ADC_V1_INTCLR(x) ((x) + 0x18)
>>> +#define ADC_V1_MUX(x) ((x) + 0x1c)
>>> +
>>> +/* EXYNOS5410 ADC_V2 registers definitions */
>>> +#define ADC_V2_CON1(x) ((x) + 0x00)
>>> +#define ADC_V2_CON2(x) ((x) + 0x04)
>>> +#define ADC_V2_STAT(x) ((x) + 0x08)
>>> +#define ADC_V2_INT_EN(x) ((x) + 0x10)
>>> +#define ADC_V2_INT_ST(x) ((x) + 0x14)
>>> +#define ADC_V2_VER(x) ((x) + 0x20)
>>> +
>>> +/* Bit definitions for ADC_V1 */
>>> +#define ADC_V1_CON_RES (1u << 16)
>>> +#define ADC_V1_CON_PRSCEN (1u << 14)
>>> +#define ADC_V1_CON_PRSCLV(x) (((x) & 0xFF) << 6)
>>> +#define ADC_V1_CON_STANDBY (1u << 2)
>>> +
>>> +/* Bit definitions for ADC_V2 */
>>> +#define ADC_V2_CON1_SOFT_RESET (1u << 2)
>>> +
>>> +#define ADC_V2_CON2_OSEL (1u << 10)
>>> +#define ADC_V2_CON2_ESEL (1u << 9)
>>> +#define ADC_V2_CON2_HIGHF (1u << 8)
>>> +#define ADC_V2_CON2_C_TIME(x) (((x) & 7) << 4)
>>> +#define ADC_V2_CON2_ACH_SEL(x) (((x) & 0xF) << 0)
>>> +#define ADC_V2_CON2_ACH_MASK 0xF
>>> +
>>> +/* Bit definitions common for ADC_V1 and ADC_V2 */
>>> +#define ADC_V1_CON_EN_START (1u << 0)
>>> +#define ADC_V1_DATX_MASK 0xFFF
>>> +
>>> +struct exynos5_adc {
>>> + void __iomem *regs;
>>> + struct clk *clk;
>>> + unsigned int irq;
>>> + struct regulator *vdd;
>>> +
>>> + struct completion completion;
>>> +
>>> + struct iio_map *map;
>>> + u32 value;
>>> + unsigned int version;
>>> +};
>>> +
>>> +static const struct of_device_id exynos5_adc_match[] = {
>>> + { .compatible = "samsung,exynos5250-adc", .data = (void *)ADC_V1 },
>>> + { .compatible = "samsung,exynos5410-adc", .data = (void *)ADC_V2 },
>>> + {},
>>> +};
>>> +MODULE_DEVICE_TABLE(of, exynos5_adc_match);
>>> +
>>> +static inline unsigned int exynos5_adc_get_version(struct platform_device *pdev)
>>> +{
>>> + const struct of_device_id *match;
>>> +
>>> + match = of_match_node(exynos5_adc_match, pdev->dev.of_node);
>>> + return (unsigned int)match->data;
>>> +}
>>> +
>>> +/* default maps used by iio consumer (ex: ntc-thermistor driver) */
>>> +static struct iio_map exynos5_adc_iio_maps[] = {
>>> + {
>>> + .consumer_dev_name = "0.ncp15wb473",
>>> + .consumer_channel = "adc3",
>>> + .adc_channel_label = "adc3",
>>> + },
>>> + {
>>> + .consumer_dev_name = "1.ncp15wb473",
>>> + .consumer_channel = "adc4",
>>> + .adc_channel_label = "adc4",
>>> + },
>>> + {
>>> + .consumer_dev_name = "2.ncp15wb473",
>>> + .consumer_channel = "adc5",
>>> + .adc_channel_label = "adc5",
>>> + },
>>> + {
>>> + .consumer_dev_name = "3.ncp15wb473",
>>> + .consumer_channel = "adc6",
>>> + .adc_channel_label = "adc6",
>>> + },
>>> + {},
>>> +};
>>> +
>>> +static int exynos5_read_raw(struct iio_dev *indio_dev,
>>> + struct iio_chan_spec const *chan,
>>> + int *val,
>>> + int *val2,
>>> + long mask)
>>> +{
>>> + struct exynos5_adc *info = iio_priv(indio_dev);
>>> + u32 con1, con2;
>>> +
>>> + if (mask == IIO_CHAN_INFO_RAW) {
>>> + mutex_lock(&indio_dev->mlock);
>>> +
>>> + /* Select the channel to be used and Trigger conversion */
>>> + if (info->version == ADC_V2) {
>>> + con2 = readl(ADC_V2_CON2(info->regs));
>>> + con2 &= ~ADC_V2_CON2_ACH_MASK;
>>> + con2 |= ADC_V2_CON2_ACH_SEL(chan->address);
>>> + writel(con2, ADC_V2_CON2(info->regs));
>>> +
>>> + con1 = readl(ADC_V2_CON1(info->regs));
>>> + writel(con1 | ADC_V1_CON_EN_START,
>>> + ADC_V2_CON1(info->regs));
>>> + } else {
>>> + writel(chan->address, ADC_V1_MUX(info->regs));
>>> +
>>> + con1 = readl(ADC_V1_CON(info->regs));
>>> + writel(con1 | ADC_V1_CON_EN_START,
>>> + ADC_V1_CON(info->regs));
>>> + }
>>> +
>>> + wait_for_completion(&info->completion);
>>> + *val = info->value;
>>> +
>>> + mutex_unlock(&indio_dev->mlock);
>>> +
>>> + return IIO_VAL_INT;
>>> + }
>>> +
>>> + return -EINVAL;
>>> +}
>>> +
>>> +static irqreturn_t exynos5_adc_isr(int irq, void *dev_id)
>>> +{
>>> + struct exynos5_adc *info = (struct exynos5_adc *)dev_id;
>>> +
>>> + /* Read value */
>>> + info->value = readl(ADC_V1_DATX(info->regs)) &
>>> + ADC_V1_DATX_MASK;
>>> + /* clear irq */
>>> + if (info->version == ADC_V2)
>>> + writel(1, ADC_V2_INT_ST(info->regs));
>>> + else
>>> + writel(1, ADC_V1_INTCLR(info->regs));
>>> +
>>> + complete(&info->completion);
>>> +
>>> + return IRQ_HANDLED;
>>> +}
>>> +
>>> +static int exynos5_adc_reg_access(struct iio_dev *indio_dev,
>>> + unsigned reg, unsigned writeval,
>>> + unsigned *readval)
>>> +{
>>> + struct exynos5_adc *info = iio_priv(indio_dev);
>>> + u32 ret;
>>> +
>>> + mutex_lock(&indio_dev->mlock);
>>> +
>>> + if (readval != NULL) {
>>> + ret = readl(info->regs + reg);
>>> + *readval = ret;
>>> + } else
>>> + ret = -EINVAL;
>>> +
>>> + mutex_unlock(&indio_dev->mlock);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static const struct iio_info exynos5_adc_iio_info = {
>>> + .read_raw = &exynos5_read_raw,
>>> + .debugfs_reg_access = &exynos5_adc_reg_access,
>>> + .driver_module = THIS_MODULE,
>>> +};
>>> +
>>> +#define ADC_V1_CHANNEL(_index, _id) { \
>>> + .type = IIO_VOLTAGE, \
>>> + .indexed = 1, \
>>> + .channel = _index, \
>>> + .address = _index, \
>>> + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
>>> + .datasheet_name = _id, \
>>> +}
>>> +
>>> +/** ADC core in EXYNOS5410 has 10 channels,
>>> + * ADC core in EXYNOS5250 has 8 channels
>>> +*/
>>> +static const struct iio_chan_spec exynos5_adc_iio_channels[] = {
>>> + ADC_V1_CHANNEL(0, "adc0"),
>>> + ADC_V1_CHANNEL(1, "adc1"),
>>> + ADC_V1_CHANNEL(2, "adc2"),
>>> + ADC_V1_CHANNEL(3, "adc3"),
>>> + ADC_V1_CHANNEL(4, "adc4"),
>>> + ADC_V1_CHANNEL(5, "adc5"),
>>> + ADC_V1_CHANNEL(6, "adc6"),
>>> + ADC_V1_CHANNEL(7, "adc7"),
>>> + ADC_V1_CHANNEL(8, "adc8"),
>>> + ADC_V1_CHANNEL(9, "adc9"),
>>> +};
>>> +
>>> +static int exynos5_adc_remove_devices(struct device *dev, void *c)
>>> +{
>>> + struct platform_device *pdev = to_platform_device(dev);
>>> +
>>> + platform_device_unregister(pdev);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static void exynos5_adc_hw_init(struct exynos5_adc *info)
>>> +{
>>> + u32 con1, con2;
>>> +
>>> + if (info->version == ADC_V2) {
>>> + con1 = ADC_V2_CON1_SOFT_RESET;
>>> + writel(con1, ADC_V2_CON1(info->regs));
>>> +
>>> + con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
>>> + ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
>>> + writel(con2, ADC_V2_CON2(info->regs));
>>> +
>>> + /* Enable interrupts */
>>> + writel(1, ADC_V2_INT_EN(info->regs));
>>> + } else {
>>> + /* set default prescaler values and Enable prescaler */
>>> + con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
>>> +
>>> + /* Enable 12-bit ADC resolution */
>>> + con1 |= ADC_V1_CON_RES;
>>> + writel(con1, ADC_V1_CON(info->regs));
>>> + }
>>> +}
>>> +
>>> +static int exynos5_adc_probe(struct platform_device *pdev)
>>> +{
>>> + struct exynos5_adc *info = NULL;
>>> + struct device_node *np = pdev->dev.of_node;
>>> + struct iio_dev *indio_dev = NULL;
>>> + struct resource *mem;
>>> + int ret = -ENODEV;
>>> + int irq;
>>> +
>>> + if (!np)
>>> + return ret;
>>> +
>>> + indio_dev = iio_device_alloc(sizeof(struct exynos5_adc));
>>> + if (!indio_dev) {
>>> + dev_err(&pdev->dev, "failed allocating iio device\n");
>>> + return -ENOMEM;
>>> + }
>>> +
>>> + info = iio_priv(indio_dev);
>>> +
>>> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> +
>>> + info->regs = devm_request_and_ioremap(&pdev->dev, mem);
>>> +
>>> + irq = platform_get_irq(pdev, 0);
>>> + if (irq < 0) {
>>> + dev_err(&pdev->dev, "no irq resource?\n");
>>> + ret = irq;
>>> + goto err_iio;
>>> + }
>>> +
>>> + info->irq = irq;
>>> +
>>> + ret = request_irq(info->irq, exynos5_adc_isr,
>>> + 0, dev_name(&pdev->dev), info);
>>> + if (ret < 0) {
>>> + dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
>>> + info->irq);
>>> + goto err_iio;
>>> + }
>>> +
>>> + info->clk = devm_clk_get(&pdev->dev, "adc");
>>> + if (IS_ERR(info->clk)) {
>>> + dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
>>> + PTR_ERR(info->clk));
>>> + ret = PTR_ERR(info->clk);
>>> + goto err_irq;
>>> + }
>>> +
>>> + info->vdd = devm_regulator_get(&pdev->dev, "vdd");
>>> + if (IS_ERR(info->vdd)) {
>>> + dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
>>> + PTR_ERR(info->vdd));
>>> + ret = PTR_ERR(info->vdd);
>>> + goto err_irq;
>>> + }
>>> +
>>> + info->version = exynos5_adc_get_version(pdev);
>>> +
>>> + platform_set_drvdata(pdev, indio_dev);
>>> +
>>> + init_completion(&info->completion);
>>> +
>>> + indio_dev->name = dev_name(&pdev->dev);
>>> + indio_dev->dev.parent = &pdev->dev;
>>> + indio_dev->dev.of_node = pdev->dev.of_node;
>>> + indio_dev->info = &exynos5_adc_iio_info;
>>> + indio_dev->modes = INDIO_DIRECT_MODE;
>>> + indio_dev->channels = exynos5_adc_iio_channels;
>>> + indio_dev->num_channels = ARRAY_SIZE(exynos5_adc_iio_channels);
>>> +
>>> + info->map = exynos5_adc_iio_maps;
>>> +
>>> + ret = iio_map_array_register(indio_dev, info->map);
>>> + if (ret) {
>>> + dev_err(&indio_dev->dev, "failed mapping iio, err: %d\n", ret);
>>> + goto err_irq;
>>> + }
>>> +
>>> + ret = iio_device_register(indio_dev);
>>> + if (ret)
>>> + goto err_map;
>>> +
>>> + ret = regulator_enable(info->vdd);
>>> + if (ret)
>>> + goto err_iio_dev;
>>> +
>>> + clk_prepare_enable(info->clk);
>>> +
>>> + exynos5_adc_hw_init(info);
>>> +
>>> + ret = of_platform_populate(np, exynos5_adc_match, NULL, &pdev->dev);
>>> + if (ret < 0) {
>>> + dev_err(&pdev->dev, "failed adding child nodes\n");
>>> + goto err_of_populate;
>>> + }
>>> +
>>> + return 0;
>>> +
>>> +err_of_populate:
>>> + device_for_each_child(&pdev->dev, NULL, exynos5_adc_remove_devices);
>>> +err_iio_dev:
>>> + iio_device_unregister(indio_dev);
>>> +err_map:
>>> + iio_map_array_unregister(indio_dev, info->map);
>>> +err_irq:
>>> + free_irq(info->irq, info);
>>> +err_iio:
>>> + iio_device_free(indio_dev);
>>> + return ret;
>>> +}
>>> +
>>> +static int exynos5_adc_remove(struct platform_device *pdev)
>>> +{
>>> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>>> + struct exynos5_adc *info = iio_priv(indio_dev);
>>> +
>>> + iio_device_unregister(indio_dev);
>>> + iio_map_array_unregister(indio_dev, info->map);
>>> + free_irq(info->irq, info);
>>> + iio_device_free(indio_dev);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +#ifdef CONFIG_PM_SLEEP
>>> +static int exynos5_adc_suspend(struct device *dev)
>>> +{
>>> + struct exynos5_adc *info = dev_get_data(dev);
>>> + u32 con;
>>> +
>>> + if (info->version == ADC_V2) {
>>> + con = readl(ADC_V2_CON1(info->regs));
>>> + con &= ~ADC_V1_CON_EN_START;
>>> + writel(con, ADC_V2_CON1(info->regs));
>>> + } else {
>>> + con = readl(ADC_V1_CON(info->regs));
>>> + con |= ADC_V1_CON_STANDBY;
>>> + writel(con, ADC_V1_CON(info->regs));
>>> + }
>>> +
>>> + clk_unprepare_disable(info->clk);
>>> + regulator_disable(info->vdd);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int exynos5_adc_resume(struct device *dev)
>>> +{
>>> + struct exynos5_adc *info = dev_get_data(dev);
>>> + int ret;
>>> +
>>> + ret = regulator_enable(info->vdd);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + clk_prepare_enable(info->clk);
>>> +
>>> + exynos5_adc_hw_init(info);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +#else
>>> +#define exynos5_adc_suspend NULL
>>> +#define exynos5_adc_resume NULL
>>> +#endif
>>> +
>>> +static SIMPLE_DEV_PM_OPS(exynos5_adc_pm_ops,
>>> + exynos5_adc_suspend,
>>> + exynos5_adc_resume);
>>> +
>>> +static struct platform_driver exynos5_adc_driver = {
>>> + .probe = exynos5_adc_probe,
>>> + .remove = exynos5_adc_remove,
>>> + .driver = {
>>> + .name = "exynos5-adc",
>>> + .owner = THIS_MODULE,
>>> + .of_match_table = of_match_ptr(exynos5_adc_match),
>>> + .pm = &exynos5_adc_pm_ops,
>>> + },
>>> +};
>>> +
>>> +module_platform_driver(exynos5_adc_driver);
>>> +
>>> +MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>");
>>> +MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver");
>>> +MODULE_LICENSE("GPL");
>
>
>
> --
> Shine bright,
> (: Nav :)
--
Shine bright,
(: Nav :)
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
