This patch moves the irq numbers starting with EINT4 4 points down to
enable the inclusion of the first 4 bits of EINT register into the mapping
removing the need for special offset handling.
For most S3C24XX architectures this will simply create 4 additional unused
interrupts, but enables the S3C2412 to make use of the new infrastructure
to realize its special handling of the EINT0 to EINT3 interrupts.
All affected parts of the Samsung code (arch + drivers) seem to use the
real interrupt defines (IRQ_something) and not any form of S3C2410_IRQ(x)
whose numbering is changed here starting from S3C2410_IRQ(32).
This patch was runtime-tested on a s3c2416 based board.
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
arch/arm/mach-s3c24xx/include/mach/irqs.h | 54 ++++++++++++++--------------
arch/arm/mach-s3c24xx/irq.c | 9 +----
2 files changed, 29 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h
index b7a9f4d..ea589e4 100644
--- a/arch/arm/mach-s3c24xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h
@@ -59,49 +59,49 @@
#define IRQ_ADCPARENT S3C2410_IRQ(31)
/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */
-#define IRQ_EINT5 S3C2410_IRQ(33)
-#define IRQ_EINT6 S3C2410_IRQ(34)
-#define IRQ_EINT7 S3C2410_IRQ(35)
-#define IRQ_EINT8 S3C2410_IRQ(36)
-#define IRQ_EINT9 S3C2410_IRQ(37)
-#define IRQ_EINT10 S3C2410_IRQ(38)
-#define IRQ_EINT11 S3C2410_IRQ(39)
-#define IRQ_EINT12 S3C2410_IRQ(40)
-#define IRQ_EINT13 S3C2410_IRQ(41)
-#define IRQ_EINT14 S3C2410_IRQ(42)
-#define IRQ_EINT15 S3C2410_IRQ(43)
-#define IRQ_EINT16 S3C2410_IRQ(44)
-#define IRQ_EINT17 S3C2410_IRQ(45)
-#define IRQ_EINT18 S3C2410_IRQ(46)
-#define IRQ_EINT19 S3C2410_IRQ(47)
-#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */
-#define IRQ_EINT21 S3C2410_IRQ(49)
-#define IRQ_EINT22 S3C2410_IRQ(50)
-#define IRQ_EINT23 S3C2410_IRQ(51)
+#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */
+#define IRQ_EINT5 S3C2410_IRQ(37)
+#define IRQ_EINT6 S3C2410_IRQ(38)
+#define IRQ_EINT7 S3C2410_IRQ(39)
+#define IRQ_EINT8 S3C2410_IRQ(40)
+#define IRQ_EINT9 S3C2410_IRQ(41)
+#define IRQ_EINT10 S3C2410_IRQ(42)
+#define IRQ_EINT11 S3C2410_IRQ(43)
+#define IRQ_EINT12 S3C2410_IRQ(44)
+#define IRQ_EINT13 S3C2410_IRQ(45)
+#define IRQ_EINT14 S3C2410_IRQ(46)
+#define IRQ_EINT15 S3C2410_IRQ(47)
+#define IRQ_EINT16 S3C2410_IRQ(48)
+#define IRQ_EINT17 S3C2410_IRQ(49)
+#define IRQ_EINT18 S3C2410_IRQ(50)
+#define IRQ_EINT19 S3C2410_IRQ(51)
+#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */
+#define IRQ_EINT21 S3C2410_IRQ(53)
+#define IRQ_EINT22 S3C2410_IRQ(54)
+#define IRQ_EINT23 S3C2410_IRQ(55)
#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4)
#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
-#define IRQ_LCD_FIFO S3C2410_IRQ(52)
-#define IRQ_LCD_FRAME S3C2410_IRQ(53)
+#define IRQ_LCD_FIFO S3C2410_IRQ(56)
+#define IRQ_LCD_FRAME S3C2410_IRQ(57)
/* IRQs for the interal UARTs, and ADC
* these need to be ordered in number of appearance in the
* SUBSRC mask register
*/
-#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54)
+#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58)
-#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */
+#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */
#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1)
#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2)
-#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */
+#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */
#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4)
#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5)
-#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */
+#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */
#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7)
#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8)
@@ -136,7 +136,7 @@
/* second interrupt-register of s3c2416/s3c2450 */
-#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 54 + 29)
+#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29)
#define IRQ_S3C2416_2D S3C2416_IRQ(0)
#define IRQ_S3C2416_IIC1 S3C2416_IRQ(1)
#define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2)
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index 1cb1962..67e8d82 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -452,7 +452,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
void __iomem *base = (void *)0xf6000000; /* static mapping */
int irq_num;
int irq_start;
- int irq_offset;
int ret;
intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
@@ -476,7 +475,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
intc->reg_intpnd = base + 0x10;
irq_num = 32;
irq_start = S3C2410_IRQ(0);
- irq_offset = 0;
break;
case 0x4a000018:
pr_debug("irq: found subintc\n");
@@ -484,7 +482,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
intc->reg_mask = base + 0x1c;
irq_num = 29;
irq_start = S3C2410_IRQSUB(0);
- irq_offset = 0;
break;
case 0x4a000040:
pr_debug("irq: found intc2\n");
@@ -493,7 +490,6 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
intc->reg_intpnd = base + 0x50;
irq_num = 8;
irq_start = S3C2416_IRQ(0);
- irq_offset = 0;
break;
case 0x560000a4:
pr_debug("irq: found eintc\n");
@@ -501,9 +497,8 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
intc->reg_mask = base + 0xa4;
intc->reg_pending = base + 0x08;
- irq_num = 20;
+ irq_num = 24;
irq_start = S3C2410_IRQ(32);
- irq_offset = 4;
break;
default:
pr_err("irq: unsupported controller address\n");
@@ -514,7 +509,7 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
/* now that all the data is complete, init the irq-domain */
s3c24xx_clear_intc(intc);
intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
- irq_offset, &s3c24xx_irq_ops,
+ 0, &s3c24xx_irq_ops,
intc);
if (!intc->domain) {
pr_err("irq: could not create irq-domain\n");
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
