On Fri, 01 Feb 2013 21:24:44 +0530, Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx> wrote: > Adds support for High Speed I2C driver found in Exynos5 and later > SoCs from Samsung. This driver currently supports Auto mode. > > Driver only supports Device Tree method. > Note: Added debugfs support for registers view, not tested. > > Signed-off-by: Taekgyun Ko <taeggyun.ko@xxxxxxxxxxx> > Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx> > --- > Help please, > > Usual reads and writes are happening. But, when i try doing > i2cdetect -y 0 0x10 0x59; It throws me continous interrupts at 0x1a > i2cdetect -y 0 0x50 0x64; It throws me continous interrupts at 0x63 > > There are eeproms from 0x50 till 0x58 > wm8994 codec at 0x1a > > Kindly, can anyone explain this behaviour. > > drivers/i2c/busses/Kconfig | 7 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-exynos5.c | 754 ++++++++++++++++++++++++++++++++++++++ Don't forget you need to document the new compatible string in Documentation/devicetree/bindings/i2c. That should be part of this patch. g. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |