Based on for-next of 'linux-samsung' tree. Aligned with following patches for separate PHY drivers for USB 2.0 and USB 3.0 for Samsung SoCs. [PATCH v5 1/2] usb: phy: samsung: Common out the generic stuff [PATCH v5 2/2] usb: phy: samsung: Add PHY support for USB 3.0 controller Changes from v2: - Putting device nodes in order of device addresses. Changes from v1: - Putting separate device nodes for usb 2.0 phy and usb 3.0 phy based on separate driver for samsung usb 3.0 phy and samsung usb 2.0 phy: [PATCH v3 0/2] Adding USB 3.0 DRD-phy support for exynos5250 [PATCH v8 0/4] Adding usb2.0 host-phy support for exynos5250 - Aligning as per the patch: usb: phy: samsung: Add support to set pmu isolation - Replaced phy-handle approach for PHY CONTROL registers to child nodes. - Removing AUX data entry from exynos5250 dt file. Vivek Gautam (2): ARM: Exynos5250: Enabling samsung-usb2phy driver ARM: Exynos5250: Enabling samsung-usb3phy driver arch/arm/boot/dts/exynos5250.dtsi | 25 +++++++++++++++++++++++++ 1 files changed, 25 insertions(+), 0 deletions(-) -- 1.7.6.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |