Re: [PATCH V2 2/2] thermal: exynos: Use the framework for temperature emulation support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 2013-01-27 at 19:28 -0800, Amit Daniel Kachhap wrote:
> This removes the driver specific sysfs support of the temperature
> emulation and uses the newly added core thermal framework for thermal
> emulation. A platform specific handler is added to support this.
> 
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
> Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
> ---
> Changes in V2:
> * Added config option CONFIG_THERMAL_EMULATION instead of
>  CONFIG_EXYNOS_THERMAL_EMUL 
> 
> This patchset is based on thermal maintainer next tree.
> git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git next 
> 
>  Documentation/thermal/exynos_thermal_emulation |    8 +-
>  drivers/thermal/Kconfig                        |    9 --
>  drivers/thermal/exynos_thermal.c               |  158 ++++++++++--------------
>  3 files changed, 67 insertions(+), 108 deletions(-)
> 
> diff --git a/Documentation/thermal/exynos_thermal_emulation b/Documentation/thermal/exynos_thermal_emulation
> index b73bbfb..36a3e79 100644
> --- a/Documentation/thermal/exynos_thermal_emulation
> +++ b/Documentation/thermal/exynos_thermal_emulation
> @@ -13,11 +13,11 @@ Thermal emulation mode supports software debug for TMU's operation. User can set
>  manually with software code and TMU will read current temperature from user value not from
>  sensor's value.
>  
> -Enabling CONFIG_EXYNOS_THERMAL_EMUL option will make this support in available.
> -When it's enabled, sysfs node will be created under
> -/sys/bus/platform/devices/'exynos device name'/ with name of 'emulation'.
> +Enabling CONFIG_THERMAL_EMULATION option will make this support available.
> +When it's enabled, sysfs node will be created as
> +/sys/devices/virtual/thermal/thermal_zone'zone id'/emul_temp.
>  
> -The sysfs node, 'emulation', will contain value 0 for the initial state. When you input any
> +The sysfs node, 'emul_node', will contain value 0 for the initial state. When you input any
>  temperature you want to update to sysfs node, it automatically enable emulation mode and
>  current temperature will be changed into it.
>  (Exynos also supports user changable delay time which would be used to delay of
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index e4cf7fb..2a79510 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -109,15 +109,6 @@ config EXYNOS_THERMAL
>  	  If you say yes here you get support for TMU (Thermal Management
>  	  Unit) on SAMSUNG EXYNOS series of SoC.
>  
> -config EXYNOS_THERMAL_EMUL
> -	bool "EXYNOS TMU emulation mode support"
> -	depends on EXYNOS_THERMAL
> -	help
> -	  Exynos 4412 and 4414 and 5 series has emulation mode on TMU.
> -	  Enable this option will be make sysfs node in exynos thermal platform
> -	  device directory to support emulation mode. With emulation mode sysfs
> -	  node, you can manually input temperature to TMU for simulation purpose.
> -
>  config DB8500_THERMAL
>  	bool "DB8500 thermal management"
>  	depends on ARCH_U8500
> diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
> index 327102a..afe9c2a 100644
> --- a/drivers/thermal/exynos_thermal.c
> +++ b/drivers/thermal/exynos_thermal.c
> @@ -99,13 +99,13 @@
>  #define IDLE_INTERVAL 10000
>  #define MCELSIUS	1000
>  
> -#ifdef CONFIG_EXYNOS_THERMAL_EMUL
> +#ifdef CONFIG_THERMAL_EMULATION
>  #define EXYNOS_EMUL_TIME	0x57F0
>  #define EXYNOS_EMUL_TIME_SHIFT	16
>  #define EXYNOS_EMUL_DATA_SHIFT	8
>  #define EXYNOS_EMUL_DATA_MASK	0xFF
>  #define EXYNOS_EMUL_ENABLE	0x1
> -#endif /* CONFIG_EXYNOS_THERMAL_EMUL */
> +#endif /* CONFIG_THERMAL_EMULATION */
>  
>  /* CPU Zone information */
>  #define PANIC_ZONE      4
> @@ -143,6 +143,7 @@ struct	thermal_cooling_conf {
>  struct thermal_sensor_conf {
>  	char name[SENSOR_NAME_LEN];
>  	int (*read_temperature)(void *data);
> +	int (*write_emul_temp)(void *data, unsigned long temp);
>  	struct thermal_trip_point_conf trip_data;
>  	struct thermal_cooling_conf cooling_data;
>  	void *private_data;
> @@ -366,6 +367,23 @@ static int exynos_get_temp(struct thermal_zone_device *thermal,
>  	return 0;
>  }
>  
> +/* Get temperature callback functions for thermal zone */
> +static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> +						unsigned long temp)
> +{
> +	void *data;
> +	int ret = -EINVAL;
> +
> +	if (!th_zone->sensor_conf) {
> +		pr_info("Temperature sensor not initialised\n");
> +		return -EINVAL;
> +	}
> +	data = th_zone->sensor_conf->private_data;
> +	if (th_zone->sensor_conf->write_emul_temp)
> +		ret = th_zone->sensor_conf->write_emul_temp(data, temp);
> +	return ret;
> +}
> +

>  /* Get the temperature trend */
>  static int exynos_get_trend(struct thermal_zone_device *thermal,
>  			int trip, enum thermal_trend *trend)
> @@ -382,6 +400,7 @@ static struct thermal_zone_device_ops const exynos_dev_ops = {
>  	.bind = exynos_bind,
>  	.unbind = exynos_unbind,
>  	.get_temp = exynos_get_temp,
> +	.set_emul_temp = exynos_set_emul_temp,
>  	.get_trend = exynos_get_trend,
>  	.get_mode = exynos_get_mode,
>  	.set_mode = exynos_set_mode,
> @@ -700,6 +719,44 @@ static int exynos_tmu_read(struct exynos_tmu_data *data)
>  	return temp;
>  }
>  
> +#ifdef CONFIG_THERMAL_EMULATION
> +static int exynos_tmu_set_emulation(struct exynos_tmu_data *data,
> +					unsigned long temp)
> +{
> +	unsigned int reg;
> +	int ret = -EINVAL;
> +
> +	if (data->soc == SOC_ARCH_EXYNOS4210)
> +		goto out;
> +
> +	if (temp && temp < MCELSIUS)
> +		goto out;
> +
> +	mutex_lock(&data->lock);
> +	clk_enable(data->clk);
> +
> +	reg = readl(data->base + EXYNOS_EMUL_CON);
> +
> +	if (temp) {
> +		temp /= MCELSIUS;
> +
> +		reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) |
> +			(temp_to_code(data, temp)
> +			 << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE;
> +	} else {
> +		reg &= ~EXYNOS_EMUL_ENABLE;
> +	}
> +
> +	writel(reg, data->base + EXYNOS_EMUL_CON);
> +
> +	clk_disable(data->clk);
> +	mutex_unlock(&data->lock);
> +	return 0;
> +out:
> +	return ret;
> +}
> +#endif/*CONFIG_THERMAL_EMULATION*/
> +
>  static void exynos_tmu_work(struct work_struct *work)
>  {
>  	struct exynos_tmu_data *data = container_of(work,
> @@ -839,93 +896,6 @@ static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
>  			platform_get_device_id(pdev)->driver_data;
>  }
>  
> -#ifdef CONFIG_EXYNOS_THERMAL_EMUL
> -static ssize_t exynos_tmu_emulation_show(struct device *dev,
> -					 struct device_attribute *attr,
> -					 char *buf)
> -{
> -	struct platform_device *pdev = container_of(dev,
> -					struct platform_device, dev);
> -	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> -	unsigned int reg;
> -	u8 temp_code;
> -	int temp = 0;
> -
> -	if (data->soc == SOC_ARCH_EXYNOS4210)
> -		goto out;
> -
> -	mutex_lock(&data->lock);
> -	clk_enable(data->clk);
> -	reg = readl(data->base + EXYNOS_EMUL_CON);
> -	clk_disable(data->clk);
> -	mutex_unlock(&data->lock);
> -
> -	if (reg & EXYNOS_EMUL_ENABLE) {
> -		reg >>= EXYNOS_EMUL_DATA_SHIFT;
> -		temp_code = reg & EXYNOS_EMUL_DATA_MASK;
> -		temp = code_to_temp(data, temp_code);
> -	}
> -out:
> -	return sprintf(buf, "%d\n", temp * MCELSIUS);
> -}
> -
> -static ssize_t exynos_tmu_emulation_store(struct device *dev,
> -					struct device_attribute *attr,
> -					const char *buf, size_t count)
> -{
> -	struct platform_device *pdev = container_of(dev,
> -					struct platform_device, dev);
> -	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> -	unsigned int reg;
> -	int temp;
> -
> -	if (data->soc == SOC_ARCH_EXYNOS4210)
> -		goto out;
> -
> -	if (!sscanf(buf, "%d\n", &temp) || temp < 0)
> -		return -EINVAL;
> -
> -	mutex_lock(&data->lock);
> -	clk_enable(data->clk);
> -
> -	reg = readl(data->base + EXYNOS_EMUL_CON);
> -
> -	if (temp) {
> -		/* Both CELSIUS and MCELSIUS type are available for input */
> -		if (temp > MCELSIUS)
> -			temp /= MCELSIUS;
> -
> -		reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) |
> -			(temp_to_code(data, (temp / MCELSIUS))
> -			 << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE;
> -	} else {
> -		reg &= ~EXYNOS_EMUL_ENABLE;
> -	}
> -
> -	writel(reg, data->base + EXYNOS_EMUL_CON);
> -
> -	clk_disable(data->clk);
> -	mutex_unlock(&data->lock);
> -
> -out:
> -	return count;
> -}
> -
> -static DEVICE_ATTR(emulation, 0644, exynos_tmu_emulation_show,
> -					exynos_tmu_emulation_store);
> -static int create_emulation_sysfs(struct device *dev)
> -{
> -	return device_create_file(dev, &dev_attr_emulation);
> -}
> -static void remove_emulation_sysfs(struct device *dev)
> -{
> -	device_remove_file(dev, &dev_attr_emulation);
> -}
> -#else
> -static inline int create_emulation_sysfs(struct device *dev) { return 0; }
> -static inline void remove_emulation_sysfs(struct device *dev) {}
> -#endif
> -
>  static int __devinit exynos_tmu_probe(struct platform_device *pdev)
>  {
>  	struct exynos_tmu_data *data;
> @@ -1002,6 +972,10 @@ static int __devinit exynos_tmu_probe(struct platform_device *pdev)
>  
>  	/* Register the sensor with thermal management interface */
>  	(&exynos_sensor_conf)->private_data = data;
> +#ifdef CONFIG_THERMAL_EMULATION
> +	(&exynos_sensor_conf)->write_emul_temp =
> +		(int (*)(void *, unsigned long))exynos_tmu_set_emulation;
> +#endif

this is a little complicate.
to enable emulation, you just need

#ifdef CONFIG_THERMAL_EMUL
static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
						unsigned long temp)
{
	remove exynos_tmu_set_emulation and copy its code here.
}
#else
static int exynos_set_emul_temp() { return -EINVAL; }
#endif

and
+ .set_emul_temp = exynos_set_emul_temp,

or do I miss something?

thanks,
rui
>  	exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en +
>  			pdata->trigger_level1_en + pdata->trigger_level2_en +
>  			pdata->trigger_level3_en;
> @@ -1025,10 +999,6 @@ static int __devinit exynos_tmu_probe(struct platform_device *pdev)
>  		goto err_clk;
>  	}
>  
> -	ret = create_emulation_sysfs(&pdev->dev);
> -	if (ret)
> -		dev_err(&pdev->dev, "Failed to create emulation mode sysfs node\n");
> -
>  	return 0;
>  err_clk:
>  	platform_set_drvdata(pdev, NULL);
> @@ -1040,8 +1010,6 @@ static int __devexit exynos_tmu_remove(struct platform_device *pdev)
>  {
>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>  
> -	remove_emulation_sysfs(&pdev->dev);
> -
>  	exynos_tmu_control(pdev, false);
>  
>  	exynos_unregister_thermal();

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux