Hi Laurent, On Saturday 02 of February 2013 11:39:59 Laurent Pinchart wrote: > Hi Tomasz, > > Thank you for your RFC. > > On Wednesday 30 January 2013 16:38:59 Tomasz Figa wrote: > > Hi, > > > > After pretty long time of trying to adapt Exynos-specific DSI display > > support to Common Display Framework I'm ready to show some preliminary > > RFC patches. This series shows some ideas for CDF that came to my > > mind during my work, some changes based on comments received by > > Tomi's edition of CDF and also preliminarys version of Exynos DSI > > (video source part only, still with some FIXMEs) and Samsung S6E8AX0 > > DSI panel drivers. > > > > It is heavily based on Tomi's work which can be found here: > > http://thread.gmane.org/gmane.comp.video.dri.devel/78227 > > > > The code might be a bit hacky in places, as I wanted to get it to a > > kind of complete and working state first. However I hope that some of > > the ideas might useful for further works. > > > > So, here comes the TF edition of Common Clock Framework. > > -------------------------------------------------------- > > > > Changes done to Tomi's edition of CDF: > > - Replaced set_operation_mode, set_pixel_format and set_size video > > source> > > operations with get_params display entity operation, as it was > > originally in Laurent's version. > > > > We have discussed this matter on the mailing list and decided that > > it > > would be better to have the source ask the sink for its parameter > > structure and do whatever appropriate with it. > > Could you briefly outline the rationale behind this ? Display interfaces may be described by an arbitrary number of parameters. Some will require just video timings, others like DSI will require a significant number of additional bus-specific ones. Separating all the parameters (all of which are usually set at the same time) into a lot of ops setting single parameter will just add unnecessary complexity. > I'm wondering whether get_params could limit us if a device needs to > modify parameters at runtime. For instance a panel might need to change > clock frequencies or number of used data lane depending on various > runtime conditions. I don't have a real use case here, so it might just > be a bit of over-engineering. Hmm, isn't it in the opposite direction (the user requests the display interface to change, for example, video mode, which in turn reconfigures the link and requests the panel to update its settings)? However it might be reasonable to split the parameters into constant and variable ones. In case of DSI bus, there is a lot of parameters that are considered just at link initialization time (the whole dsi params struct I defined). Video mode, however, is a variable parameter that can be changed on some displays. > > > - Defined a preliminary set of DSI bus parameters. > > > > Following parameters are defined: > > > > 1. Pixel format used for video data transmission. > > > > 2. Mode flags (several bit flags ORed together): > > a) DSI_MODE_VIDEO - entity uses video mode (as opposed to command > > > > mode), following DSI_MODE_VIDEO_* flags are relevant only if > > this > > flag is set. > > b) DSI_MODE_VIDEO_BURST - entity uses burst transfer for video > > data > > c) DSI_MODE_VIDEO_SYNC_PULSE - entity uses sync pulses (as > > opposed > > > > to sync events) > > > > d) DSI_MODE_VIDEO_AUTO_VERT - entity uses automatic video mode > > > > detection > > > > e) DSI_MODE_VIDEO_HSE - entity needs horizontal sync end > > packets > > f) DSI_MODE_VIDEO_HFP - entity needs horizontal front porch > > area > > g) DSI_MODE_VIDEO_HBP - entity needs horizontal back porch > > area > > h) DSI_MODE_VIDEO_HSA - entity needs horizontal sync active > > area > > > > i) DSI_MODE_VSYNC_FLUSH - vertical sync pulse flushes video data > > j) DSI_MODE_EOT_PACKET - entity needs EoT packets > > > > 3. Bit (serial) clock frequency in HS mode. > > 4. Escape mode clock frequency. > > 5. Mask of used data lanes (each bit represents single lane). > > From my experience with MIPI CSI (Camera Serial Interface, similar to > DSI) some transceivers can reroute data lanes internally. Is that true > for DSI as well ? In that case we would need a list of data lanes, not > just a mask. Hmm, I don't remember at the moment, will have to look to the specification. Exynos DSI master doesn't support such feature. > > 6. Command allow area in video mode - amount of lines after > > transmitting> > > video data when generic commands are accepted. > > > > Feel free to suggest anything missing or wrong, as the list of > > parameters is based merely on what was used in original Exynos MIPI > > DSIM driver. > > > > - Redesigned source-entity matching. > > > > Now each source has name string and integer id and each entity has > > source name and source id. In addition, they can have of_node > > specified, which is used for Device Tree-based matching. > > > > The matching procedure is as follows: > > > > 1. Matching takes place when display entity registers. > > > > a) If there is of_node specified for the entity then > > "video-source" > > > > phandle of this node is being parsed and list of registered > > sources > > is traversed in search of a source with of_node received from > > parsing the phandle. > > > > b) Otherwise the matching key is a pair of source name and id. > > > > 2. If no matching source is found, display_entity_register returns > > > > -EPROBE_DEFER error which causes the entity driver to defer its > > probe until the source registers. > > > > 3. Otherwise an optional bind operation of video source is called, > > > > sink field of source and source field of entity are set and the > > matching ends successfully. > > > > - Some initial concept of source-entity cross-locking. > > > > Only video source is protected at the moment, as I still have to > > think > > a bit about locking the entity in a way where removing it by user > > request is still possible. > > One of the main locking issues here are cross-references. The display > entity holds a reference to the video source (for video operations), > and the display controller driver holds a reference to the display > entity (for control operations), resulting in a cross-references lock > situation. One possible solution would be to first unbind the display > entity device from its driver to break the cycle. Yes, this is a problem that requires a bit more thought. I've been discussing this issue with Sylwester and we came to a conclusion that for sure a display entity can normally get a reference to its video source (e.g. module_get, to prevent unloading the module), as there should be no possibility of video source going away, leaving display entity present and so there is no need for unregistering a bound video source. This is what I implemented in my code. Now it shall be possible to unregister a bound display entity, for example to have the ability of unplugging a hotpluggable display (HDMI, Display Port), but this will need some non-trivial synchronization. I'm still thinking how to do it properly. Best regards, Tomasz > > - Dropped any panels and chips that I can't test. > > > > They are irrelevant for this series, so there is no point in > > including > > them. > > > > - Added Exynos DSI video source driver. > > > > This is a new driver for the DSI controller found in Exynos SoCs. > > It > > still needs some work, but in current state can be considered an > > example of DSI video source implementation for my version of CDF. > > > > - Added Samsung S6E8AX0 DSI panel driver. > > > > This is the old Exynos-specific driver, just migrated to CDF and > > with > > some hacks to provide control over entity state to userspace using > > lcd device. However it can be used to demonstrate video source ops > > in > > use. > > > > Feel free to comment as much as you can. > > > > Tomasz Figa (4): > > video: add display-core > > video: add makefile & kconfig > > video: display: Add exynos-dsi video source driver > > video: display: Add Samsung s6e8ax0 display panel driver > > > > drivers/video/Kconfig | 1 + > > drivers/video/Makefile | 1 + > > drivers/video/display/Kconfig | 16 + > > drivers/video/display/Makefile | 3 + > > drivers/video/display/display-core.c | 295 +++++++ > > drivers/video/display/panel-s6e8ax0.c | 1027 > > ++++++++++++++++++++++ > > drivers/video/display/source-exynos_dsi.c | 1313 > > ++++++++++++++++++++++++++ include/video/display.h > > | 230 +++++ > > include/video/exynos_dsi.h | 41 + > > include/video/panel-s6e8ax0.h | 41 + > > 10 files changed, 2968 insertions(+) > > create mode 100644 drivers/video/display/Kconfig > > create mode 100644 drivers/video/display/Makefile > > create mode 100644 drivers/video/display/display-core.c > > create mode 100644 drivers/video/display/panel-s6e8ax0.c > > create mode 100644 drivers/video/display/source-exynos_dsi.c > > create mode 100644 include/video/display.h > > create mode 100644 include/video/exynos_dsi.h > > create mode 100644 include/video/panel-s6e8ax0.h -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |