Re: [PATCH] ARM: dts: add mshc controller node for Exynos4x12 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Thomas,

Thank you. I will submit the change soon.

Thanks again.
Dongjin.

On Wed, Jan 23, 2013 at 8:25 AM, Thomas Abraham
<thomas.abraham@xxxxxxxxxx> wrote:
> Hi Dongjin,
>
> On 22 January 2013 10:15, Dongjin Kim <tobetter@xxxxxxxxx> wrote:
>> Hi Thomas,
>>
>> Good to see your patch, actually I had sent similar one before but no
>> one care my patch. And now I feel it seems to be wrong.
>>
>> But I have a couple of question if I use your patch to enable MSHC
>> controller work properly on Exynos4412.
>>
>> What's the exact form of ".compatible" on board file?
>> With your patch, MSHC is not probed at all in my board. The
>> ".compatible" has to be 'samsung,exynos5250-dw-mshc' and it works.
>>
>> I also tried '.compatible = "samsung,exynos5250-dw-mshc",
>> "samsung,exynos4412-dw-mshc"', it probes the driver but in the
>> function 'dw_mci_exynos_priv_init', priv->ctrl_type always becomes
>> DW_MCI_TYPE_EXYNOS5250. Because there is a loop and returns each
>> compatible strings in alphanumeric order whatever it is ordered in the
>> board file.
>>
>> I also tried below patch to add a compatible for Exynos4412 to
>> 'dw_mci_exynos_match' with its specific data, and it works. What's the
>> right direction? If I am missing something or wrong, please correct
>> me. :)
>
> Yes, your below patch is the correct thing to do. The dt patches for
> dwmmc controller driver were only tested on Exynos5250 based board. So
> I had not added the compatible string for Exynos4412 in
> 'of_match_table' of the driver. Please submit the below change as a
> patch (minor comment below).
>
>>
>> Many thanks,
>> Dongjin.
>>
>> @@ -184,6 +186,25 @@ static int dw_mci_exynos_setup_bus(struct dw_mci *host,
>>         return 0;
>>  }
>>
>> +/* Exynos4412 controller specific capabilities */
>> +static unsigned long exynos4412_dwmmc_caps[4] = {
>> +       MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
>> +               MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
>> +       MMC_CAP_CMD23,
>> +       MMC_CAP_CMD23,
>> +       MMC_CAP_CMD23,
>> +};
>
> Since this is same as the 'exynos5250_dwmmc_caps', it can be reused
> for 4412 as well, avoiding duplicate copy 'exynos4412_dwmmc_caps'.
>
>> +
>> +static const struct dw_mci_drv_data exynos4412_drv_data = {
>> +       .caps                   = exynos4412_dwmmc_caps,
>> +       .init                   = dw_mci_exynos_priv_init,
>> +       .setup_clock            = dw_mci_exynos_setup_clock,
>> +       .prepare_command        = dw_mci_exynos_prepare_command,
>> +       .set_ios                = dw_mci_exynos_set_ios,
>> +       .parse_dt               = dw_mci_exynos_parse_dt,
>> +       .setup_bus              = dw_mci_exynos_setup_bus,
>> +};
>
> If the above change is done, 'exynos4412_drv_data ' also could be avoided.
>
>> +
>>  /* Exynos5250 controller specific capabilities */
>>  static unsigned long exynos5250_dwmmc_caps[4] = {
>>         MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
>> @@ -204,6 +225,8 @@ static const struct dw_mci_drv_data exynos5250_drv_data = {
>>  };
>>
>>  static const struct of_device_id dw_mci_exynos_match[] = {
>> +       { .compatible = "samsung,exynos4412-dw-mshc",
>> +                       .data = &exynos4412_drv_data, },
>>         { .compatible = "samsung,exynos5250-dw-mshc",
>>                         .data = &exynos5250_drv_data, },
>>         {},
>
> Thanks,
> Thomas.
>
>>
>>
>> On Mon, Jan 21, 2013 at 7:39 PM, Thomas Abraham
>> <thomas.abraham@xxxxxxxxxx> wrote:
>>> Commit cea0f256 ("ARM: dts: Add board dts file for ODROID-X") includes a node
>>> to describe the board level properties for mshc controller. But the mshc
>>> controller node was not added in the Exynos4x12 dtsi file which resulted
>>> in the following warning when compiling the dtb files.
>>>
>>> Warning (reg_format): "reg" property in /mshc@12550000/slot@0 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
>>> Warning (avoid_default_addr_size): Relying on default #address-cells value for /mshc@12550000/slot@0
>>> Warning (avoid_default_addr_size): Relying on default #size-cells value for /mshc@12550000/slot@0
>>>
>>> Fix this by adding the mshc controller node for Exynos4x12 SoCs.
>>>
>>> Cc: Dongjin Kim <tobetter@xxxxxxxxx>
>>> Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
>>> Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
>>> ---
>>>  arch/arm/boot/dts/exynos4412.dtsi |    8 ++++++++
>>>  1 files changed, 8 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
>>> index 78ed377..96f5b66 100644
>>> --- a/arch/arm/boot/dts/exynos4412.dtsi
>>> +++ b/arch/arm/boot/dts/exynos4412.dtsi
>>> @@ -32,4 +32,12 @@
>>>                 interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
>>>                              <1 12 0>, <1 12 0>, <1 12 0>, <1 12 0>;
>>>         };
>>> +
>>> +       mshc@12550000 {
>>> +               compatible = "samsung,exynos4412-dw-mshc";
>>> +               reg = <0x12550000 0x1000>;
>>> +               interrupts = <0 77 0>;
>>> +               #address-cells = <1>;
>>> +               #size-cells = <0>;
>>> +       };
>>>  };
>>> --
>>> 1.7.5.4
>>>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux