HI, On Tue, Jan 22, 2013 at 11:29:47AM +0200, Felipe Balbi wrote: > On Tue, Jan 22, 2013 at 02:45:26PM +0530, Vivek Gautam wrote: > > Hi Felipe, > > > > > > On Tue, Jan 22, 2013 at 2:20 PM, Felipe Balbi <balbi@xxxxxx> wrote: > > > HI, > > > > > > On Mon, Jan 21, 2013 at 09:23:28PM -0800, Kukjin Kim wrote: > > >> Vivek Gautam wrote: > > >> > > > >> > Changes from v5: > > >> > - Rebased on top of latest patches: > > >> > usb: phy: samsung: Introducing usb phy driver for hsotg (v9) > > >> > usb: phy: samsung: Add support to set pmu isolation (v6) > > >> > As a result adding hostphy enable mask and hostphy register offsets > > >> > to driver data in order to access the HOSTPHY CONTROL register. > > >> > > > >> > - Adding member 'otg' to struct samsung-usbphy so that its consumers > > >> > can call otg->set_host so as to make 'phy' aware of the consumer type: > > >> > HOST/DEVICE > > >> > > > >> > - Adding 'otg' to 'struct s5p_ehci_hcd' and 'struct exynos_ohci_hcd' > > >> > which keeps track of 'otg' of the controllers' phy. This then sets > > >> > the host. > > >> > > > >> > - Moved samsung_usbphy_set_type() calls from ehci-s5p and ohci-exynos > > >> > to phy driver itself where based on phy_type it is called. > > >> > > > >> > - Added separate macro definition for USB20PHY_CFG register to select > > >> > between host/device type usb link. > > >> > > > >> > - Removing unnecessary argument 'phy_type' from > > >> > samsung_usbphy_set_type() > > >> > and samsung_usbphy_cfg_sel(). > > >> > > > >> > - Addressed few nits: > > >> > -- added macro for 'KHZ' > > >> > -- removing useless 'if' from samsung_usbphy_cfg_sel() > > >> > -- keeping the place of clk_get intact and requesting driver > > >> > data before that. > > >> > > > >> > Vivek Gautam (4): > > >> > ARM: EXYNOS: Update & move usb-phy types to generic include layer > > >> > usb: phy: samsung: Add host phy support to samsung-phy driver > > >> > USB: ehci-s5p: Add phy driver support > > >> > USB: ohci-exynos: Add phy driver support > > >> > > > >> > .../devicetree/bindings/usb/samsung-usbphy.txt | 12 +- > > >> > drivers/usb/host/ehci-s5p.c | 81 +++- > > >> > drivers/usb/host/ohci-exynos.c | 85 +++- > > >> > drivers/usb/phy/Kconfig | 2 +- > > >> > drivers/usb/phy/samsung-usbphy.c | 512 > > >> ++++++++++++++++++-- > > >> > include/linux/usb/samsung_usb_phy.h | 16 + > > >> > 6 files changed, 635 insertions(+), 73 deletions(-) > > >> > create mode 100644 include/linux/usb/samsung_usb_phy.h > > >> > > > >> > -- > > >> > 1.7.6.5 > > >> > > >> Looks good to me, > > >> > > >> Felipe and Greg, I don't know who should take this series anyway, feel free > > >> to add my ack: > > >> > > >> Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx> > > > > > > I will take care of it. But I need Alan's Acked-by for EHCI and OHCI > > > parts. > > > > > > > We got Alan's ACK for: > > USB: ehci-s5p: Add phy driver support > > USB: ohci-exynos: Add phy driver support > > Ok, then as soon as I get back to the office (in a few hours), I'll > start queueing those. Actually, if you want to make my life a little easier today, you could resend the series with all Acks in place ;-) ps: hehe, I'm about to go a little nuts today, too many things happening at once ;-) -- balbi
Attachment:
signature.asc
Description: Digital signature