Hi Felipe, On Sat, Jan 19, 2013 at 12:16 AM, Felipe Balbi <balbi@xxxxxx> wrote: > Hi, > > On Fri, Jan 18, 2013 at 02:30:21PM +0530, Praveen Paneri wrote: >> Changes from v8: >> Resending this patch series after rebasing to the latest usb-next branch. >> Rewording inline comments for better readability. >> Removed IS_ENABLED(CONFIG_OF) as pdev->dev.of_node is enough to check for dt support. >> Using of_match_ptr to add of_match_table to platform_driver structure. >> Removed unnecessary variables. >> >> Changes from v7: >> Rebased to the latest usb-next branch. >> Separating arch patches from these driver patches. >> >> Changes from v6: >> Modified register definitions according to the existing ones. >> Changed default PHY clk selection for SoCs. >> Improved binding text and rebased to the latest usb-next. >> >> Changes from v5: >> Moved clk_get() to driver's probe function. Now reference clock frequency >> selection value is stored in samsung_usbphy structure for later use. Used >> IS_ENABLED() instead of #ifdef in samsung_usbphy_get_driver_data(). >> >> Changes from v4: >> Moved header file contents to driver's source file >> Removed unnecessary print message from driver's probe function >> Dropped the Free Software Foundation address from the header >> >> Changes from v3: >> Replaced susbsys_initcall()/module_exit() by module_platform_driver(). >> Accordingly in the hsotg driver returned -EPROBE_DEFER until phy driver >> is registered >> Removed unnecessary devm_usb_put_phy() call from the hsotg driver remove. >> >> Changes from v2: >> Changed the driver filenames to samsung-usbphy >> Rectified coding style related errors >> >> Changes from v1: >> Rebased patches to latest usb-next branch >> Changed the name 'sec_usbphy' to 'samsung_usbphy' >> >> This patch set introduces a phy driver for samsung SoCs. It uses the existing >> transceiver infrastructure to provide phy control functions. Use of this driver >> can be extended for usb host phy as well. Over the period of time all the phy >> related code for most of the samsung SoCs can be integrated here. >> Removing the existing phy code from mach-s3c64xx. Same can be done for other SoCs >> when they start supporting this phy driver. >> This driver is tested with smdk6410 and Exynos4210(with DT). >> >> Praveen Paneri (2): >> usb: phy: samsung: Introducing usb phy driver for hsotg >> usb: s3c-hsotg: Adding phy driver support > > Can you check on my xceiv branch if this is applied correctly ? Yes! It is applied fine. Thanks :) Praveen > > thanks > > -- > balbi -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |