This patch adds host phy support to samsung-usbphy driver and
further adds support for samsung's exynos5250 usb-phy.
Signed-off-by: Praveen Paneri <p.paneri@xxxxxxxxxxx>
Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
---
Changes from v6:
- Changing macro names from 'HOST_CTRL0_FSEL_CLKSEL_XX' to 'FSEL_CLKSEL_XX'
since it's being used by HOST and OTG block to prepare reference clock.
- Directly Assigning 'FSEL_CLKSEL_XX' to refclk_freq in
samsung_usbphy_get_refclk_freq() instead of ORing them since we are
anyways using macros:
"HOST_CTRL0_FSEL(_x) ((_x) << 16)"
"OTG_SYS_FSEL(_x) ((_x) << 4)"
.../devicetree/bindings/usb/samsung-usbphy.txt | 12 +-
drivers/usb/phy/Kconfig | 2 +-
drivers/usb/phy/samsung-usbphy.c | 513 ++++++++++++++++++--
3 files changed, 496 insertions(+), 31 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
index 22d06cf..0331949 100644
--- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
+++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
@@ -1,15 +1,23 @@
* Samsung's usb phy transceiver
-The Samsung's phy transceiver is used for controlling usb otg phy for
-s3c-hsotg usb device controller.
+The Samsung's phy transceiver is used for controlling usb phy for
+s3c-hsotg as well as ehci-s5p and ohci-exynos usb controllers
+across Samsung SOCs.
TODO: Adding the PHY binding with controller(s) according to the under
developement generic PHY driver.
Required properties:
+
+Exynos4210:
- compatible : should be "samsung,exynos4210-usbphy"
- reg : base physical address of the phy registers and length of memory mapped
region.
+Exynos5250:
+- compatible : should be "samsung,exynos5250-usbphy"
+- reg : base physical address of the phy registers and length of memory mapped
+ region.
+
Optional properties:
- #address-cells: should be '1' when usbphy node has a child node with 'reg'
property.
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 36a85b6..fae4d08 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -48,7 +48,7 @@ config USB_RCAR_PHY
config SAMSUNG_USBPHY
bool "Samsung USB PHY controller Driver"
- depends on USB_S3C_HSOTG
+ depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS
select USB_OTG_UTILS
help
Enable this to support Samsung USB phy controller for samsung
diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
index 7eec7c3..355c6b2 100644
--- a/drivers/usb/phy/samsung-usbphy.c
+++ b/drivers/usb/phy/samsung-usbphy.c
@@ -5,7 +5,8 @@
*
* Author: Praveen Paneri <p.paneri@xxxxxxxxxxx>
*
- * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
+ * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
+ * OHCI-EXYNOS controllers.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -21,11 +22,13 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/usb/otg.h>
+#include <linux/usb/samsung_usb_phy.h>
#include <linux/platform_data/samsung-usbphy.h>
/* Register definitions */
@@ -57,24 +60,132 @@
#define RSTCON_HLINK_SWRST (0x1 << 1)
#define RSTCON_SWRST (0x1 << 0)
+/* EXYNOS5 */
+#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
+
+#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31)
+
+#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19)
+#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19)
+#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19)
+#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19)
+
+#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
+#define HOST_CTRL0_FSEL(_x) ((_x) << 16)
+
+#define FSEL_CLKSEL_50M (0x7)
+#define FSEL_CLKSEL_24M (0x5)
+#define FSEL_CLKSEL_20M (0x4)
+#define FSEL_CLKSEL_19200K (0x3)
+#define FSEL_CLKSEL_12M (0x2)
+#define FSEL_CLKSEL_10M (0x1)
+#define FSEL_CLKSEL_9600K (0x0)
+
+#define HOST_CTRL0_TESTBURNIN (0x1 << 11)
+#define HOST_CTRL0_RETENABLE (0x1 << 10)
+#define HOST_CTRL0_COMMONON_N (0x1 << 9)
+#define HOST_CTRL0_SIDDQ (0x1 << 6)
+#define HOST_CTRL0_FORCESLEEP (0x1 << 5)
+#define HOST_CTRL0_FORCESUSPEND (0x1 << 4)
+#define HOST_CTRL0_WORDINTERFACE (0x1 << 3)
+#define HOST_CTRL0_UTMISWRST (0x1 << 2)
+#define HOST_CTRL0_LINKSWRST (0x1 << 1)
+#define HOST_CTRL0_PHYSWRST (0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_TUNE0 (0x04)
+
+#define EXYNOS5_PHY_HSIC_CTRL1 (0x10)
+
+#define EXYNOS5_PHY_HSIC_TUNE1 (0x14)
+
+#define EXYNOS5_PHY_HSIC_CTRL2 (0x20)
+
+#define EXYNOS5_PHY_HSIC_TUNE2 (0x24)
+
+#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23)
+#define HSIC_CTRL_REFCLKSEL (0x2 << 23)
+
+#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16)
+#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16)
+#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16)
+#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16)
+#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16)
+#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16)
+#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16)
+
+#define HSIC_CTRL_SIDDQ (0x1 << 6)
+#define HSIC_CTRL_FORCESLEEP (0x1 << 5)
+#define HSIC_CTRL_FORCESUSPEND (0x1 << 4)
+#define HSIC_CTRL_WORDINTERFACE (0x1 << 3)
+#define HSIC_CTRL_UTMISWRST (0x1 << 2)
+#define HSIC_CTRL_PHYSWRST (0x1 << 0)
+
+#define EXYNOS5_PHY_HOST_EHCICTRL (0x30)
+
+#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29)
+#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28)
+#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27)
+#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26)
+
+#define EXYNOS5_PHY_HOST_OHCICTRL (0x34)
+
+#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3)
+#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2)
+#define HOST_OHCICTRL_CNTSEL (0x1 << 1)
+#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0)
+
+#define EXYNOS5_PHY_OTG_SYS (0x38)
+
+#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14)
+#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13)
+#define OTG_SYS_PHY0_SWRST (0x1 << 12)
+
+#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9)
+#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9)
+#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9)
+#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9)
+
+#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8)
+#define OTG_SYS_COMMON_ON (0x1 << 7)
+
+#define OTG_SYS_FSEL_MASK (0x7 << 4)
+#define OTG_SYS_FSEL(_x) ((_x) << 4)
+
+#define OTG_SYS_FORCESLEEP (0x1 << 3)
+#define OTG_SYS_OTGDISABLE (0x1 << 2)
+#define OTG_SYS_SIDDQ_UOTG (0x1 << 1)
+#define OTG_SYS_FORCESUSPEND (0x1 << 0)
+
+#define EXYNOS5_PHY_OTG_TUNE (0x40)
+
#ifndef MHZ
#define MHZ (1000*1000)
#endif
+#ifndef KHZ
+#define KHZ (1000)
+#endif
+
+#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4)
#define S3C64XX_USBPHY_ENABLE (0x1 << 16)
#define EXYNOS_USBPHY_ENABLE (0x1 << 0)
+#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0)
enum samsung_cpu_type {
TYPE_S3C64XX,
TYPE_EXYNOS4210,
+ TYPE_EXYNOS5250,
};
/*
* struct samsung_usbphy_drvdata - driver data for various SoC variants
* @cpu_type: machine identifier
* @devphy_en_mask: device phy enable mask for PHY CONTROL register
+ * @hostphy_en_mask: host phy enable mask for PHY CONTROL register
* @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
* mapped address of system controller.
+ * @hostphy_reg_offset: offset to HOST PHY CONTROL register from
+ * mapped address of system controller.
*
* Here we have a separate mask for device type phy.
* Having different masks for host and device type phy helps
@@ -87,7 +198,9 @@ enum samsung_cpu_type {
struct samsung_usbphy_drvdata {
int cpu_type;
int devphy_en_mask;
+ int hostphy_en_mask;
u32 devphy_reg_offset;
+ u32 hostphy_reg_offset;
};
/*
@@ -98,8 +211,12 @@ struct samsung_usbphy_drvdata {
* @clk: usb phy clock
* @regs: usb phy controller registers memory base
* @pmuregs: USB device PHY_CONTROL register memory base
+ * @sysreg: USB2.0 PHY_CFG register memory base
* @ref_clk_freq: reference clock frequency selection
* @drv_data: driver data available for different SoCs
+ * @phy_type: Samsung SoCs specific phy types: #HOST
+ * #DEVICE
+ * @phy_usage: usage count for phy
* @lock: lock for phy operations
*/
struct samsung_usbphy {
@@ -109,13 +226,27 @@ struct samsung_usbphy {
struct clk *clk;
void __iomem *regs;
void __iomem *pmuregs;
+ void __iomem *sysreg;
int ref_clk_freq;
const struct samsung_usbphy_drvdata *drv_data;
+ enum samsung_usb_phy_type phy_type;
+ atomic_t phy_usage;
spinlock_t lock;
};
#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
+int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ if (!otg)
+ return -ENODEV;
+
+ if (!otg->host)
+ otg->host = host;
+
+ return 0;
+}
+
static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
{
struct device_node *usbphy_sys;
@@ -127,14 +258,27 @@ static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
sphy->pmuregs = of_iomap(usbphy_sys, 0);
- of_node_put(usbphy_sys);
-
if (sphy->pmuregs == NULL) {
dev_err(sphy->dev, "Can't get usb-phy pmu control register\n");
- return -ENODEV;
+ goto err0;
}
+ sphy->sysreg = of_iomap(usbphy_sys, 1);
+
+ /*
+ * Not returning error code here, since this situation is not fatal.
+ * Few SoCs may not have this switch available
+ */
+ if (sphy->sysreg == NULL)
+ dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n");
+
+ of_node_put(usbphy_sys);
+
return 0;
+
+err0:
+ of_node_put(usbphy_sys);
+ return -ENXIO;
}
/*
@@ -144,17 +288,42 @@ static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
*/
static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
{
- void __iomem *reg;
+ void __iomem *reg = NULL;
u32 reg_val;
- u32 en_mask;
+ u32 en_mask = 0;
if (!sphy->pmuregs) {
dev_warn(sphy->dev, "Can't set pmu isolation\n");
return;
}
- reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset;
- en_mask = sphy->drv_data->devphy_en_mask;
+ switch (sphy->drv_data->cpu_type) {
+ case TYPE_S3C64XX:
+ /*
+ * Do nothing: We will add here once S3C64xx goes for DT support
+ */
+ break;
+ case TYPE_EXYNOS4210:
+ /*
+ * Fall through since exynos4210 and exynos5250 have similar
+ * register architecture: two separate registers for host and
+ * device phy control with enable bit at position 0.
+ */
+ case TYPE_EXYNOS5250:
+ if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
+ reg = sphy->pmuregs +
+ sphy->drv_data->devphy_reg_offset;
+ en_mask = sphy->drv_data->devphy_en_mask;
+ } else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
+ reg = sphy->pmuregs +
+ sphy->drv_data->hostphy_reg_offset;
+ en_mask = sphy->drv_data->hostphy_en_mask;
+ }
+ break;
+ default:
+ dev_err(sphy->dev, "Invalid SoC type\n");
+ return;
+ }
reg_val = readl(reg);
@@ -167,6 +336,43 @@ static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
}
/*
+ * Configure the mode of working of usb-phy here: HOST/DEVICE.
+ */
+static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
+{
+ u32 reg;
+
+ if (!sphy->sysreg) {
+ dev_warn(sphy->dev, "Can't configure specified phy mode\n");
+ return;
+ }
+
+ reg = readl(sphy->sysreg);
+
+ if (sphy->phy_type == USB_PHY_TYPE_DEVICE)
+ reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK;
+ else if (sphy->phy_type == USB_PHY_TYPE_HOST)
+ reg |= EXYNOS_USB20PHY_CFG_HOST_LINK;
+
+ writel(reg, sphy->sysreg);
+}
+
+/*
+ * PHYs are different for USB Device and USB Host.
+ * This make sure that correct PHY type is selected before
+ * any operation on PHY.
+ */
+static int samsung_usbphy_set_type(struct usb_phy *phy,
+ enum samsung_usb_phy_type phy_type)
+{
+ struct samsung_usbphy *sphy = phy_to_sphy(phy);
+
+ sphy->phy_type = phy_type;
+
+ return 0;
+}
+
+/*
* Returns reference clock frequency selection value
*/
static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
@@ -174,34 +380,185 @@ static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
struct clk *ref_clk;
int refclk_freq = 0;
- ref_clk = clk_get(sphy->dev, "xusbxti");
+ /*
+ * In exynos5250 USB host and device PHY use
+ * external crystal clock XXTI
+ */
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
+ ref_clk = clk_get(sphy->dev, "ext_xtal");
+ else
+ ref_clk = clk_get(sphy->dev, "xusbxti");
if (IS_ERR(ref_clk)) {
dev_err(sphy->dev, "Failed to get reference clock\n");
return PTR_ERR(ref_clk);
}
- switch (clk_get_rate(ref_clk)) {
- case 12 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_12M;
- break;
- case 24 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_24M;
- break;
- case 48 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_48M;
- break;
- default:
- if (sphy->drv_data->cpu_type == TYPE_S3C64XX)
- refclk_freq = PHYCLK_CLKSEL_48M;
- else
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) {
+ /* set clock frequency for PLL */
+ switch (clk_get_rate(ref_clk)) {
+ case 9600 * KHZ:
+ refclk_freq = FSEL_CLKSEL_9600K;
+ break;
+ case 10 * MHZ:
+ refclk_freq = FSEL_CLKSEL_10M;
+ break;
+ case 12 * MHZ:
+ refclk_freq = FSEL_CLKSEL_12M;
+ break;
+ case 19200 * KHZ:
+ refclk_freq = FSEL_CLKSEL_19200K;
+ break;
+ case 20 * MHZ:
+ refclk_freq = FSEL_CLKSEL_20M;
+ break;
+ case 50 * MHZ:
+ refclk_freq = FSEL_CLKSEL_50M;
+ break;
+ case 24 * MHZ:
+ default:
+ /* default reference clock */
+ refclk_freq = FSEL_CLKSEL_24M;
+ break;
+ }
+ } else {
+ switch (clk_get_rate(ref_clk)) {
+ case 12 * MHZ:
+ refclk_freq = PHYCLK_CLKSEL_12M;
+ break;
+ case 24 * MHZ:
refclk_freq = PHYCLK_CLKSEL_24M;
- break;
+ break;
+ case 48 * MHZ:
+ refclk_freq = PHYCLK_CLKSEL_48M;
+ break;
+ default:
+ if (sphy->drv_data->cpu_type == TYPE_S3C64XX)
+ refclk_freq = PHYCLK_CLKSEL_48M;
+ else
+ refclk_freq = PHYCLK_CLKSEL_24M;
+ break;
+ }
}
clk_put(ref_clk);
return refclk_freq;
}
+static bool exynos5_phyhost_is_on(void *regs)
+{
+ u32 reg;
+
+ reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ return !(reg & HOST_CTRL0_SIDDQ);
+}
+
+static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phyclk = sphy->ref_clk_freq;
+ u32 phyhost;
+ u32 phyotg;
+ u32 phyhsic;
+ u32 ehcictrl;
+ u32 ohcictrl;
+
+ /*
+ * phy_usage helps in keeping usage count for phy
+ * so that the first consumer enabling the phy is also
+ * the last consumer to disable it.
+ */
+
+ atomic_inc(&sphy->phy_usage);
+
+ if (exynos5_phyhost_is_on(regs)) {
+ dev_info(sphy->dev, "Already power on PHY\n");
+ return;
+ }
+
+ /* Host configuration */
+ phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ /* phy reference clock configuration */
+ phyhost &= ~HOST_CTRL0_FSEL_MASK;
+ phyhost |= HOST_CTRL0_FSEL(phyclk);
+
+ /* host phy reset */
+ phyhost &= ~(HOST_CTRL0_PHYSWRST |
+ HOST_CTRL0_PHYSWRSTALL |
+ HOST_CTRL0_SIDDQ |
+ /* Enable normal mode of operation */
+ HOST_CTRL0_FORCESUSPEND |
+ HOST_CTRL0_FORCESLEEP);
+
+ /* Link reset */
+ phyhost |= (HOST_CTRL0_LINKSWRST |
+ HOST_CTRL0_UTMISWRST |
+ /* COMMON Block configuration during suspend */
+ HOST_CTRL0_COMMONON_N);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+ udelay(10);
+ phyhost &= ~(HOST_CTRL0_LINKSWRST |
+ HOST_CTRL0_UTMISWRST);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ /* OTG configuration */
+ phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
+
+ /* phy reference clock configuration */
+ phyotg &= ~OTG_SYS_FSEL_MASK;
+ phyotg |= OTG_SYS_FSEL(phyclk);
+
+ /* Enable normal mode of operation */
+ phyotg &= ~(OTG_SYS_FORCESUSPEND |
+ OTG_SYS_SIDDQ_UOTG |
+ OTG_SYS_FORCESLEEP |
+ OTG_SYS_REFCLKSEL_MASK |
+ /* COMMON Block configuration during suspend */
+ OTG_SYS_COMMON_ON);
+
+ /* OTG phy & link reset */
+ phyotg |= (OTG_SYS_PHY0_SWRST |
+ OTG_SYS_LINKSWRST_UOTG |
+ OTG_SYS_PHYLINK_SWRESET |
+ OTG_SYS_OTGDISABLE |
+ /* Set phy refclk */
+ OTG_SYS_REFCLKSEL_CLKCORE);
+
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+ udelay(10);
+ phyotg &= ~(OTG_SYS_PHY0_SWRST |
+ OTG_SYS_LINKSWRST_UOTG |
+ OTG_SYS_PHYLINK_SWRESET);
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+
+ /* HSIC phy configuration */
+ phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
+ HSIC_CTRL_REFCLKSEL |
+ HSIC_CTRL_PHYSWRST);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+ udelay(10);
+ phyhsic &= ~HSIC_CTRL_PHYSWRST;
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+
+ udelay(80);
+
+ /* enable EHCI DMA burst */
+ ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
+ ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
+ HOST_EHCICTRL_ENAINCR4 |
+ HOST_EHCICTRL_ENAINCR8 |
+ HOST_EHCICTRL_ENAINCR16);
+ writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
+
+ /* set ohci_suspend_on_n */
+ ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
+ ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
+ writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
+}
+
static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
@@ -237,6 +594,41 @@ static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
writel(rstcon, regs + SAMSUNG_RSTCON);
}
+static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy)
+{
+ void __iomem *regs = sphy->regs;
+ u32 phyhost;
+ u32 phyotg;
+ u32 phyhsic;
+
+ if (atomic_dec_return(&sphy->phy_usage) > 0) {
+ dev_info(sphy->dev, "still being used\n");
+ return;
+ }
+
+ phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
+ HSIC_CTRL_REFCLKSEL |
+ HSIC_CTRL_SIDDQ |
+ HSIC_CTRL_FORCESLEEP |
+ HSIC_CTRL_FORCESUSPEND);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
+ writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
+
+ phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
+ phyhost |= (HOST_CTRL0_SIDDQ |
+ HOST_CTRL0_FORCESUSPEND |
+ HOST_CTRL0_FORCESLEEP |
+ HOST_CTRL0_PHYSWRST |
+ HOST_CTRL0_PHYSWRSTALL);
+ writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
+
+ phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
+ phyotg |= (OTG_SYS_FORCESUSPEND |
+ OTG_SYS_SIDDQ_UOTG |
+ OTG_SYS_FORCESLEEP);
+ writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
+}
+
static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
@@ -264,11 +656,14 @@ static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
static int samsung_usbphy_init(struct usb_phy *phy)
{
struct samsung_usbphy *sphy;
+ struct usb_bus *host = NULL;
unsigned long flags;
int ret = 0;
sphy = phy_to_sphy(phy);
+ host = phy->otg->host;
+
/* Enable the phy clock */
ret = clk_prepare_enable(sphy->clk);
if (ret) {
@@ -278,19 +673,35 @@ static int samsung_usbphy_init(struct usb_phy *phy)
spin_lock_irqsave(&sphy->lock, flags);
+ if (host) {
+ /* setting default phy-type for USB 2.0 */
+ if (!strstr(dev_name(host->controller), "ehci") ||
+ !strstr(dev_name(host->controller), "ohci"))
+ samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
+ } else {
+ samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+ }
+
/* Disable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(false);
else
samsung_usbphy_set_isolation(sphy, false);
+ /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
+ samsung_usbphy_cfg_sel(sphy);
+
/* Initialize usb phy registers */
- samsung_usbphy_enable(sphy);
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
+ samsung_exynos5_usbphy_enable(sphy);
+ else
+ samsung_usbphy_enable(sphy);
spin_unlock_irqrestore(&sphy->lock, flags);
/* Disable the phy clock */
clk_disable_unprepare(sphy->clk);
+
return ret;
}
@@ -300,10 +711,13 @@ static int samsung_usbphy_init(struct usb_phy *phy)
static void samsung_usbphy_shutdown(struct usb_phy *phy)
{
struct samsung_usbphy *sphy;
+ struct usb_bus *host = NULL;
unsigned long flags;
sphy = phy_to_sphy(phy);
+ host = phy->otg->host;
+
if (clk_prepare_enable(sphy->clk)) {
dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
return;
@@ -311,8 +725,20 @@ static void samsung_usbphy_shutdown(struct usb_phy *phy)
spin_lock_irqsave(&sphy->lock, flags);
+ if (host) {
+ /* setting default phy-type for USB 2.0 */
+ if (!strstr(dev_name(host->controller), "ehci") ||
+ !strstr(dev_name(host->controller), "ohci"))
+ samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
+ } else {
+ samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+ }
+
/* De-initialize usb phy registers */
- samsung_usbphy_disable(sphy);
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
+ samsung_exynos5_usbphy_disable(sphy);
+ else
+ samsung_usbphy_disable(sphy);
/* Enable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
@@ -344,7 +770,9 @@ static inline const struct samsung_usbphy_drvdata
static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
{
struct samsung_usbphy *sphy;
+ struct usb_otg *otg;
struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
+ const struct samsung_usbphy_drvdata *drv_data;
struct device *dev = &pdev->dev;
struct resource *phy_mem;
void __iomem *phy_base;
@@ -367,7 +795,17 @@ static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
if (!sphy)
return -ENOMEM;
- clk = devm_clk_get(dev, "otg");
+ otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ drv_data = samsung_usbphy_get_driver_data(pdev);
+
+ if (drv_data->cpu_type == TYPE_EXYNOS5250)
+ clk = devm_clk_get(dev, "usbhost");
+ else
+ clk = devm_clk_get(dev, "otg");
+
if (IS_ERR(clk)) {
dev_err(dev, "Failed to get otg clock\n");
return PTR_ERR(clk);
@@ -389,13 +827,17 @@ static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
sphy->plat = pdata;
sphy->regs = phy_base;
sphy->clk = clk;
+ sphy->drv_data = drv_data;
sphy->phy.dev = sphy->dev;
sphy->phy.label = "samsung-usbphy";
sphy->phy.init = samsung_usbphy_init;
sphy->phy.shutdown = samsung_usbphy_shutdown;
- sphy->drv_data = samsung_usbphy_get_driver_data(pdev);
sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
+ sphy->phy.otg = otg;
+ sphy->phy.otg->phy = &sphy->phy;
+ sphy->phy.otg->set_host = samsung_usbphy_set_host;
+
spin_lock_init(&sphy->lock);
platform_set_drvdata(pdev, sphy);
@@ -411,6 +853,8 @@ static int __exit samsung_usbphy_remove(struct platform_device *pdev)
if (sphy->pmuregs)
iounmap(sphy->pmuregs);
+ if (sphy->sysreg)
+ iounmap(sphy->sysreg);
return 0;
}
@@ -423,6 +867,13 @@ static const struct samsung_usbphy_drvdata usbphy_s3c64xx = {
static const struct samsung_usbphy_drvdata usbphy_exynos4 = {
.cpu_type = TYPE_EXYNOS4210,
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
+};
+
+static struct samsung_usbphy_drvdata usbphy_exynos5 = {
+ .cpu_type = TYPE_EXYNOS5250,
+ .hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
};
#ifdef CONFIG_OF
@@ -433,6 +884,9 @@ static const struct of_device_id samsung_usbphy_dt_match[] = {
}, {
.compatible = "samsung,exynos4210-usbphy",
.data = &usbphy_exynos4,
+ }, {
+ .compatible = "samsung,exynos5250-usbphy",
+ .data = &usbphy_exynos5
},
{},
};
@@ -446,6 +900,9 @@ static struct platform_device_id samsung_usbphy_driver_ids[] = {
}, {
.name = "exynos4210-usbphy",
.driver_data = (unsigned long)&usbphy_exynos4,
+ }, {
+ .name = "exynos5250-usbphy",
+ .driver_data = (unsigned long)&usbphy_exynos5,
},
{},
};
--
1.7.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
