Re: [PATCH v5 3/4] USB: ehci-s5p: Add phy driver support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



CC: Doug Anderson.


On Tue, Dec 18, 2012 at 8:13 PM, Vivek Gautam <gautam.vivek@xxxxxxxxxxx> wrote:
> Adding the phy driver to ehci-s5p. Keeping the platform data
> for continuing the smooth operation for boards which still uses it
>
> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
> Acked-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
> ---
>  drivers/usb/host/ehci-s5p.c |   70 ++++++++++++++++++++++++++++++-------------
>  1 files changed, 49 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
> index 46ca5ef..50c93af 100644
> --- a/drivers/usb/host/ehci-s5p.c
> +++ b/drivers/usb/host/ehci-s5p.c
> @@ -17,6 +17,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/of_gpio.h>
>  #include <linux/platform_data/usb-ehci-s5p.h>
> +#include <linux/usb/phy.h>
>  #include <linux/usb/samsung_usb_phy.h>
>  #include <plat/usb-phy.h>
>
> @@ -33,6 +34,8 @@ struct s5p_ehci_hcd {
>         struct device *dev;
>         struct usb_hcd *hcd;
>         struct clk *clk;
> +       struct usb_phy *phy;
> +       struct s5p_ehci_platdata *pdata;
>  };
>
>  static const struct hc_driver s5p_ehci_hc_driver = {
> @@ -66,6 +69,30 @@ static const struct hc_driver s5p_ehci_hc_driver = {
>         .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
>  };
>
> +static void s5p_ehci_phy_enable(struct s5p_ehci_hcd *s5p_ehci)
> +{
> +       struct platform_device *pdev = to_platform_device(s5p_ehci->dev);
> +
> +       if (s5p_ehci->phy) {
> +               samsung_usbphy_set_type(s5p_ehci->phy, USB_PHY_TYPE_HOST);
> +               usb_phy_init(s5p_ehci->phy);
> +       } else if (s5p_ehci->pdata->phy_init) {
> +               s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
> +       }
> +}
> +
> +static void s5p_ehci_phy_disable(struct s5p_ehci_hcd *s5p_ehci)
> +{
> +       struct platform_device *pdev = to_platform_device(s5p_ehci->dev);
> +
> +       if (s5p_ehci->phy) {
> +               samsung_usbphy_set_type(s5p_ehci->phy, USB_PHY_TYPE_HOST);
> +               usb_phy_shutdown(s5p_ehci->phy);
> +       } else if (s5p_ehci->pdata->phy_exit) {
> +               s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
> +       }
> +}
> +
>  static void s5p_setup_vbus_gpio(struct platform_device *pdev)
>  {
>         int err;
> @@ -88,20 +115,15 @@ static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
>
>  static int s5p_ehci_probe(struct platform_device *pdev)
>  {
> -       struct s5p_ehci_platdata *pdata;
> +       struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
>         struct s5p_ehci_hcd *s5p_ehci;
>         struct usb_hcd *hcd;
>         struct ehci_hcd *ehci;
>         struct resource *res;
> +       struct usb_phy *phy;
>         int irq;
>         int err;
>
> -       pdata = pdev->dev.platform_data;
> -       if (!pdata) {
> -               dev_err(&pdev->dev, "No platform data defined\n");
> -               return -EINVAL;
> -       }
> -
>         /*
>          * Right now device-tree probed devices don't get dma_mask set.
>          * Since shared usb code relies on it, set it here for now.
> @@ -119,6 +141,19 @@ static int s5p_ehci_probe(struct platform_device *pdev)
>         if (!s5p_ehci)
>                 return -ENOMEM;
>
> +       phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
> +       if (IS_ERR_OR_NULL(phy)) {
> +               /* Fallback to pdata */
> +               if (!pdata) {
> +                       dev_err(&pdev->dev, "no platform data or transceiver defined\n");
> +                       return -EPROBE_DEFER;
> +               } else {
> +                       s5p_ehci->pdata = pdata;
> +               }
> +       } else {
> +               s5p_ehci->phy = phy;
> +       }
> +
>         s5p_ehci->dev = &pdev->dev;
>
>         hcd = usb_create_hcd(&s5p_ehci_hc_driver, &pdev->dev,
> @@ -164,8 +199,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
>                 goto fail_io;
>         }
>
> -       if (pdata->phy_init)
> -               pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
> +       s5p_ehci_phy_enable(s5p_ehci);
>
>         ehci = hcd_to_ehci(hcd);
>         ehci->caps = hcd->regs;
> @@ -176,13 +210,15 @@ static int s5p_ehci_probe(struct platform_device *pdev)
>         err = usb_add_hcd(hcd, irq, IRQF_SHARED);
>         if (err) {
>                 dev_err(&pdev->dev, "Failed to add USB HCD\n");
> -               goto fail_io;
> +               goto fail_add_hcd;
>         }
>
>         platform_set_drvdata(pdev, s5p_ehci);
>
>         return 0;
>
> +fail_add_hcd:
> +       s5p_ehci_phy_disable(s5p_ehci);
>  fail_io:
>         clk_disable_unprepare(s5p_ehci->clk);
>  fail_clk:
> @@ -192,14 +228,12 @@ fail_clk:
>
>  static int s5p_ehci_remove(struct platform_device *pdev)
>  {
> -       struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
>         struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev);
>         struct usb_hcd *hcd = s5p_ehci->hcd;
>
>         usb_remove_hcd(hcd);
>
> -       if (pdata && pdata->phy_exit)
> -               pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
> +       s5p_ehci_phy_disable(s5p_ehci);
>
>         clk_disable_unprepare(s5p_ehci->clk);
>
> @@ -223,14 +257,11 @@ static int s5p_ehci_suspend(struct device *dev)
>         struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev);
>         struct usb_hcd *hcd = s5p_ehci->hcd;
>         bool do_wakeup = device_may_wakeup(dev);
> -       struct platform_device *pdev = to_platform_device(dev);
> -       struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
>         int rc;
>
>         rc = ehci_suspend(hcd, do_wakeup);
>
> -       if (pdata && pdata->phy_exit)
> -               pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
> +       s5p_ehci_phy_disable(s5p_ehci);
>
>         clk_disable_unprepare(s5p_ehci->clk);
>
> @@ -241,13 +272,10 @@ static int s5p_ehci_resume(struct device *dev)
>  {
>         struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev);
>         struct usb_hcd *hcd = s5p_ehci->hcd;
> -       struct platform_device *pdev = to_platform_device(dev);
> -       struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
>
>         clk_prepare_enable(s5p_ehci->clk);
>
> -       if (pdata && pdata->phy_init)
> -               pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
> +       s5p_ehci_phy_enable(s5p_ehci);
>
>         /* DMA burst Enable */
>         writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
> --
> 1.7.6.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Thanks & Regards
Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux