Am Sonntag, 2. Dezember 2012, 20:44:09 schrieb Romain Naour:
> This patch replace ARCH_USES_GETTIMEOFFSET by GENERIC_CLOCKEVENTS for
> s3c24xx devices. It becomes possible to use the high-resolution timer and
> dynamic ticks.
>
>
> Signed-off-by: Naour Romain <romain.naour@xxxxxxxxxxx>
Tested-by: Heiko Stuebner <heiko@xxxxxxxxx>
on a s3c2416 based board
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index ade7e92..6563476 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -737,7 +737,8 @@ config ARCH_SA1100
> config ARCH_S3C24XX
> bool "Samsung S3C24XX SoCs"
> select ARCH_HAS_CPUFREQ
> - select ARCH_USES_GETTIMEOFFSET
> + select GENERIC_CLOCKEVENTS
> + select CLKSRC_MMIO
> select CLKDEV_LOOKUP
> select GENERIC_GPIO
> select HAVE_CLK
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index 2b6cb5f..be2c482 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -21,6 +21,7 @@ config CPU_S3C2410
> select S3C2410_CLOCK
> select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
> select S3C2410_PM if PM
> + select SAMSUNG_HRT
> help
> Support for S3C2410 and S3C2410A family from the S3C24XX line
> of Samsung Mobile CPUs.
> @@ -32,6 +33,7 @@ config CPU_S3C2412
> select CPU_LLSERIAL_S3C2440
> select S3C2412_DMA if S3C24XX_DMA
> select S3C2412_PM if PM
> + select SAMSUNG_HRT
> help
> Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
>
> @@ -44,6 +46,7 @@ config CPU_S3C2416
> select S3C2443_COMMON
> select S3C2443_DMA if S3C24XX_DMA
> select SAMSUNG_CLKSRC
> + select SAMSUNG_HRT
> help
> Support for the S3C2416 SoC from the S3C24XX line
>
> @@ -54,6 +57,7 @@ config CPU_S3C2440
> select S3C2410_CLOCK
> select S3C2410_PM if PM
> select S3C2440_DMA if S3C24XX_DMA
> + select SAMSUNG_HRT
> help
> Support for S3C2440 Samsung Mobile CPU based systems.
>
> @@ -63,6 +67,7 @@ config CPU_S3C2442
> select CPU_LLSERIAL_S3C2440
> select S3C2410_CLOCK
> select S3C2410_PM if PM
> + select SAMSUNG_HRT
> help
> Support for S3C2442 Samsung Mobile CPU based systems.
>
> @@ -78,6 +83,7 @@ config CPU_S3C2443
> select S3C2443_COMMON
> select S3C2443_DMA if S3C24XX_DMA
> select SAMSUNG_CLKSRC
> + select SAMSUNG_HRT
> help
> Support for the S3C2443 SoC from the S3C24XX line
>
> diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c
> b/arch/arm/mach-s3c24xx/mach-amlm5900.c index f4ad99c..84c9bb0 100644
> --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
> +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
> @@ -63,6 +63,8 @@
> #include <linux/mtd/map.h>
> #include <linux/mtd/physmap.h>
>
> +#include <plat/samsung-time.h>
> +
> #include "common.h"
>
> static struct resource amlm5900_nor_resource =
> @@ -160,6 +162,7 @@ static void __init amlm5900_map_io(void)
> s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
> s3c24xx_init_clocks(0);
> s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> #ifdef CONFIG_FB_S3C2410
> @@ -237,6 +240,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
> .map_io = amlm5900_map_io,
> .init_irq = s3c24xx_init_irq,
> .init_machine = amlm5900_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2410_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c
> b/arch/arm/mach-s3c24xx/mach-anubis.c index 1ee8c46..65ba844 100644
> --- a/arch/arm/mach-s3c24xx/mach-anubis.c
> +++ b/arch/arm/mach-s3c24xx/mach-anubis.c
> @@ -54,6 +54,7 @@
> #include <plat/devs.h>
> #include <plat/cpu.h>
> #include <linux/platform_data/asoc-s3c24xx_simtec.h>
> +#include <plat/samsung-time.h>
>
> #include "simtec.h"
> #include "common.h"
> @@ -414,6 +415,7 @@ static void __init anubis_map_io(void)
> s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
> s3c24xx_init_clocks(0);
> s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
>
> /* check for the newer revision boards with large page nand */
>
> @@ -448,6 +450,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
> .map_io = anubis_map_io,
> .init_machine = anubis_init,
> .init_irq = s3c24xx_init_irq,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c244x_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c
> b/arch/arm/mach-s3c24xx/mach-at2440evb.c index 00381fe..d7eb641 100644
> --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
> +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
> @@ -48,6 +48,7 @@
> #include <plat/devs.h>
> #include <plat/cpu.h>
> #include <linux/platform_data/mmc-s3cmci.h>
> +#include <plat/samsung-time.h>
>
> #include "common.h"
>
> @@ -192,6 +193,7 @@ static void __init at2440evb_map_io(void)
> s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
> s3c24xx_init_clocks(16934400);
> s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init at2440evb_init(void)
> @@ -210,6 +212,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
> .map_io = at2440evb_map_io,
> .init_machine = at2440evb_init,
> .init_irq = s3c24xx_init_irq,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c244x_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-bast.c
> b/arch/arm/mach-s3c24xx/mach-bast.c index 6a30ce7..a9c442e 100644
> --- a/arch/arm/mach-s3c24xx/mach-bast.c
> +++ b/arch/arm/mach-s3c24xx/mach-bast.c
> @@ -63,6 +63,7 @@
> #include <plat/cpu-freq.h>
> #include <plat/gpio-cfg.h>
> #include <linux/platform_data/asoc-s3c24xx_simtec.h>
> +#include <plat/samsung-time.h>
>
> #include "simtec.h"
> #include "common.h"
> @@ -583,6 +584,7 @@ static void __init bast_map_io(void)
> s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
> s3c24xx_init_clocks(0);
> s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init bast_init(void)
> @@ -612,6 +614,6 @@ MACHINE_START(BAST, "Simtec-BAST")
> .map_io = bast_map_io,
> .init_irq = s3c24xx_init_irq,
> .init_machine = bast_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2410_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c
> b/arch/arm/mach-s3c24xx/mach-gta02.c index 4a96346..02c6c6a 100644
> --- a/arch/arm/mach-s3c24xx/mach-gta02.c
> +++ b/arch/arm/mach-s3c24xx/mach-gta02.c
> @@ -88,6 +88,7 @@
> #include <plat/gpio-cfg.h>
> #include <linux/platform_data/i2c-s3c2410.h>
> #include <linux/platform_data/touchscreen-s3c2410.h>
> +#include <plat/samsung-time.h>
>
> #include "common.h"
>
> @@ -507,6 +508,7 @@ static void __init gta02_map_io(void)
> s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
> s3c24xx_init_clocks(12000000);
> s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
>
> @@ -596,6 +598,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
> .map_io = gta02_map_io,
> .init_irq = s3c24xx_init_irq,
> .init_machine = gta02_machine_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c244x_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c
> b/arch/arm/mach-s3c24xx/mach-h1940.c index 63aaf07..f5d3578 100644
> --- a/arch/arm/mach-s3c24xx/mach-h1940.c
> +++ b/arch/arm/mach-s3c24xx/mach-h1940.c
> @@ -67,6 +67,7 @@
> #include <plat/pm.h>
> #include <linux/platform_data/mmc-s3cmci.h>
> #include <linux/platform_data/touchscreen-s3c2410.h>
> +#include <plat/samsung-time.h>
>
> #include <sound/uda1380.h>
>
> @@ -652,6 +653,7 @@ static void __init h1940_map_io(void)
> s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
> s3c24xx_init_clocks(0);
> s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
>
> /* setup PM */
>
> @@ -747,6 +749,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
> .reserve = h1940_reserve,
> .init_irq = h1940_init_irq,
> .init_machine = h1940_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2410_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-jive.c
> b/arch/arm/mach-s3c24xx/mach-jive.c index c9954e2..01a894d 100644
> --- a/arch/arm/mach-s3c24xx/mach-jive.c
> +++ b/arch/arm/mach-s3c24xx/mach-jive.c
> @@ -55,6 +55,7 @@
> #include <plat/cpu.h>
> #include <plat/pm.h>
> #include <linux/platform_data/usb-s3c2410_udc.h>
> +#include <plat/samsung-time.h>
>
> static struct map_desc jive_iodesc[] __initdata = {
> };
> @@ -506,6 +507,7 @@ static void __init jive_map_io(void)
> s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
> s3c24xx_init_clocks(12000000);
> s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void jive_power_off(void)
> @@ -661,6 +663,6 @@ MACHINE_START(JIVE, "JIVE")
> .init_irq = s3c24xx_init_irq,
> .map_io = jive_map_io,
> .init_machine = jive_machine_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2412_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c
> b/arch/arm/mach-s3c24xx/mach-mini2440.c index 393c0f1..a96efcd 100644
> --- a/arch/arm/mach-s3c24xx/mach-mini2440.c
> +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
> @@ -57,6 +57,7 @@
> #include <plat/clock.h>
> #include <plat/devs.h>
> #include <plat/cpu.h>
> +#include <plat/samsung-time.h>
>
> #include <sound/s3c24xx_uda134x.h>
>
> @@ -527,6 +528,7 @@ static void __init mini2440_map_io(void)
> s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
> s3c24xx_init_clocks(12000000);
> s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> /*
> @@ -689,6 +691,6 @@ MACHINE_START(MINI2440, "MINI2440")
> .map_io = mini2440_map_io,
> .init_machine = mini2440_init,
> .init_irq = s3c24xx_init_irq,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c244x_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-n30.c
> b/arch/arm/mach-s3c24xx/mach-n30.c index c53a9bf..f6cea03 100644
> --- a/arch/arm/mach-s3c24xx/mach-n30.c
> +++ b/arch/arm/mach-s3c24xx/mach-n30.c
> @@ -50,6 +50,7 @@
> #include <linux/platform_data/mmc-s3cmci.h>
> #include <plat/s3c2410.h>
> #include <linux/platform_data/usb-s3c2410_udc.h>
> +#include <plat/samsung-time.h>
>
> #include "common.h"
>
> @@ -536,6 +537,7 @@ static void __init n30_map_io(void)
> n30_hwinit();
> s3c24xx_init_clocks(0);
> s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> /* GPB3 is the line that controls the pull-up for the USB D+ line */
> @@ -589,7 +591,7 @@ MACHINE_START(N30, "Acer-N30")
> Ben Dooks <ben-linux@xxxxxxxxx>
> */
> .atag_offset = 0x100,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .init_machine = n30_init,
> .init_irq = s3c24xx_init_irq,
> .map_io = n30_map_io,
> @@ -600,7 +602,7 @@ MACHINE_START(N35, "Acer-N35")
> /* Maintainer: Christer Weinigel <christer@xxxxxxxxxxx>
> */
> .atag_offset = 0x100,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .init_machine = n30_init,
> .init_irq = s3c24xx_init_irq,
> .map_io = n30_map_io,
> diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c
> b/arch/arm/mach-s3c24xx/mach-nexcoder.c index a2b92b0..4db6fb3 100644
> --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
> +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
> @@ -46,6 +46,7 @@
> #include <plat/clock.h>
> #include <plat/devs.h>
> #include <plat/cpu.h>
> +#include <plat/samsung-time.h>
>
> #include "common.h"
>
> @@ -137,6 +138,7 @@ static void __init nexcoder_map_io(void)
> s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
> s3c24xx_init_clocks(0);
> s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
>
> nexcoder_sensorboard_init();
> }
> @@ -153,6 +155,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder
> 2440") .map_io = nexcoder_map_io,
> .init_machine = nexcoder_init,
> .init_irq = s3c24xx_init_irq,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c244x_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c
> b/arch/arm/mach-s3c24xx/mach-osiris.c index bb36d83..e85144e 100644
> --- a/arch/arm/mach-s3c24xx/mach-osiris.c
> +++ b/arch/arm/mach-s3c24xx/mach-osiris.c
> @@ -53,6 +53,7 @@
> #include <plat/clock.h>
> #include <plat/devs.h>
> #include <plat/cpu.h>
> +#include <plat/samsung-time.h>
>
> #include "common.h"
>
> @@ -386,6 +387,7 @@ static void __init osiris_map_io(void)
> s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
> s3c24xx_init_clocks(0);
> s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
>
> /* check for the newer revision boards with large page nand */
>
> @@ -428,6 +430,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
> .map_io = osiris_map_io,
> .init_irq = s3c24xx_init_irq,
> .init_machine = osiris_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c244x_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-otom.c
> b/arch/arm/mach-s3c24xx/mach-otom.c index bca39f0..ab5f353 100644
> --- a/arch/arm/mach-s3c24xx/mach-otom.c
> +++ b/arch/arm/mach-s3c24xx/mach-otom.c
> @@ -37,6 +37,7 @@
> #include <plat/devs.h>
> #include <linux/platform_data/i2c-s3c2410.h>
> #include <plat/cpu.h>
> +#include <plat/samsung-time.h>
>
> #include "common.h"
>
> @@ -104,6 +105,7 @@ static void __init otom11_map_io(void)
> s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
> s3c24xx_init_clocks(0);
> s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init otom11_init(void)
> @@ -118,6 +120,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
> .map_io = otom11_map_io,
> .init_machine = otom11_init,
> .init_irq = s3c24xx_init_irq,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2410_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c
> b/arch/arm/mach-s3c24xx/mach-qt2410.c index 7b6ba13..e725554 100644
> --- a/arch/arm/mach-s3c24xx/mach-qt2410.c
> +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
> @@ -60,6 +60,7 @@
> #include <plat/devs.h>
> #include <plat/cpu.h>
> #include <plat/pm.h>
> +#include <plat/samsung-time.h>
>
> #include "common.h"
>
> @@ -304,6 +305,7 @@ static void __init qt2410_map_io(void)
> s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
> s3c24xx_init_clocks(12*1000*1000);
> s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init qt2410_machine_init(void)
> @@ -343,6 +345,6 @@ MACHINE_START(QT2410, "QT2410")
> .map_io = qt2410_map_io,
> .init_irq = s3c24xx_init_irq,
> .init_machine = qt2410_machine_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2410_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c
> b/arch/arm/mach-s3c24xx/mach-rx1950.c index 379fde5..63fbeb1 100644
> --- a/arch/arm/mach-s3c24xx/mach-rx1950.c
> +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
> @@ -58,6 +58,7 @@
> #include <plat/pm.h>
> #include <plat/irq.h>
> #include <linux/platform_data/touchscreen-s3c2410.h>
> +#include <plat/samsung-time.h>
>
> #include <sound/uda1380.h>
>
> @@ -743,6 +744,7 @@ static void __init rx1950_map_io(void)
> s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
> s3c24xx_init_clocks(16934000);
> s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
>
> /* setup PM */
>
> @@ -815,6 +817,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
> .reserve = rx1950_reserve,
> .init_irq = s3c24xx_init_irq,
> .init_machine = rx1950_init_machine,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c244x_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c
> b/arch/arm/mach-s3c24xx/mach-rx3715.c index dacbb9a..1b358a1 100644
> --- a/arch/arm/mach-s3c24xx/mach-rx3715.c
> +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
> @@ -50,6 +50,7 @@
> #include <plat/devs.h>
> #include <plat/cpu.h>
> #include <plat/pm.h>
> +#include <plat/samsung-time.h>
>
> #include "common.h"
>
> @@ -179,6 +180,7 @@ static void __init rx3715_map_io(void)
> s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
> s3c24xx_init_clocks(16934000);
> s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> /* H1940 and RX3715 need to reserve this for suspend */
> @@ -212,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
> .reserve = rx3715_reserve,
> .init_irq = rx3715_init_irq,
> .init_machine = rx3715_init_machine,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c244x_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c
> b/arch/arm/mach-s3c24xx/mach-smdk2410.c index 82796b9..c7a18bc 100644
> --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
> +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
> @@ -53,6 +53,7 @@
> #include <plat/cpu.h>
>
> #include <plat/common-smdk.h>
> +#include <plat/samsung-time.h>
>
> #include "common.h"
>
> @@ -101,6 +102,7 @@ static void __init smdk2410_map_io(void)
> s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
> s3c24xx_init_clocks(0);
> s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init smdk2410_init(void)
> @@ -117,6 +119,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a
> new identifier and switc .map_io = smdk2410_map_io,
> .init_irq = s3c24xx_init_irq,
> .init_machine = smdk2410_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2410_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c
> b/arch/arm/mach-s3c24xx/mach-smdk2413.c index ce99fd8..c29c067 100644
> --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
> +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
> @@ -47,6 +47,7 @@
> #include <plat/clock.h>
> #include <plat/devs.h>
> #include <plat/cpu.h>
> +#include <plat/samsung-time.h>
>
> #include <plat/common-smdk.h>
>
> @@ -107,6 +108,7 @@ static void __init smdk2413_map_io(void)
> s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
> s3c24xx_init_clocks(12000000);
> s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init smdk2413_machine_init(void)
> @@ -133,7 +135,7 @@ MACHINE_START(S3C2413, "S3C2413")
> .init_irq = s3c24xx_init_irq,
> .map_io = smdk2413_map_io,
> .init_machine = smdk2413_machine_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2412_restart,
> MACHINE_END
>
> @@ -145,7 +147,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
> .init_irq = s3c24xx_init_irq,
> .map_io = smdk2413_map_io,
> .init_machine = smdk2413_machine_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2412_restart,
> MACHINE_END
>
> @@ -157,6 +159,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
> .init_irq = s3c24xx_init_irq,
> .map_io = smdk2413_map_io,
> .init_machine = smdk2413_machine_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2412_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c
> b/arch/arm/mach-s3c24xx/mach-smdk2416.c index f30d7fc..2c0b7a1 100644
> --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
> +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
> @@ -52,6 +52,7 @@
> #include <plat/sdhci.h>
> #include <linux/platform_data/usb-s3c2410_udc.h>
> #include <linux/platform_data/s3c-hsudc.h>
> +#include <plat/samsung-time.h>
>
> #include <plat/fb.h>
>
> @@ -222,6 +223,7 @@ static void __init smdk2416_map_io(void)
> s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
> s3c24xx_init_clocks(12000000);
> s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init smdk2416_machine_init(void)
> @@ -254,6 +256,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
> .init_irq = s3c24xx_init_irq,
> .map_io = smdk2416_map_io,
> .init_machine = smdk2416_machine_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2416_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c
> b/arch/arm/mach-s3c24xx/mach-smdk2440.c index b7ff882..caf5c04 100644
> --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
> +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
> @@ -44,6 +44,7 @@
> #include <plat/clock.h>
> #include <plat/devs.h>
> #include <plat/cpu.h>
> +#include <plat/samsung-time.h>
>
> #include <plat/common-smdk.h>
>
> @@ -164,6 +165,7 @@ static void __init smdk2440_map_io(void)
> s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
> s3c24xx_init_clocks(16934400);
> s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init smdk2440_machine_init(void)
> @@ -182,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440")
> .init_irq = s3c24xx_init_irq,
> .map_io = smdk2440_map_io,
> .init_machine = smdk2440_machine_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c244x_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c
> b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 2568656..02fcd27 100644
> --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
> +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
> @@ -44,6 +44,7 @@
> #include <plat/clock.h>
> #include <plat/devs.h>
> #include <plat/cpu.h>
> +#include <plat/samsung-time.h>
>
> #include <plat/common-smdk.h>
>
> @@ -123,6 +124,7 @@ static void __init smdk2443_map_io(void)
> s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
> s3c24xx_init_clocks(12000000);
> s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init smdk2443_machine_init(void)
> @@ -144,6 +146,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
> .init_irq = s3c24xx_init_irq,
> .map_io = smdk2443_map_io,
> .init_machine = smdk2443_machine_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2443_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
> b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 495bf5c..90f43c9 100644
> --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
> +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
> @@ -53,6 +53,7 @@
> #include <linux/mtd/partitions.h>
> #include <linux/mtd/map.h>
> #include <linux/mtd/physmap.h>
> +#include <plat/samsung-time.h>
>
> #include "common.h"
>
> @@ -136,6 +137,7 @@ static void __init tct_hammer_map_io(void)
> s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
> s3c24xx_init_clocks(0);
> s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init tct_hammer_init(void)
> @@ -149,6 +151,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
> .map_io = tct_hammer_map_io,
> .init_irq = s3c24xx_init_irq,
> .init_machine = tct_hammer_init,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2410_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c
> b/arch/arm/mach-s3c24xx/mach-vr1000.c index 14d5b12..4366c6f 100644
> --- a/arch/arm/mach-s3c24xx/mach-vr1000.c
> +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
> @@ -50,6 +50,7 @@
> #include <plat/cpu.h>
> #include <linux/platform_data/i2c-s3c2410.h>
> #include <linux/platform_data/asoc-s3c24xx_simtec.h>
> +#include <plat/samsung-time.h>
>
> #include "simtec.h"
> #include "common.h"
> @@ -335,6 +336,7 @@ static void __init vr1000_map_io(void)
> s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
> s3c24xx_init_clocks(0);
> s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init vr1000_init(void)
> @@ -357,6 +359,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
> .map_io = vr1000_map_io,
> .init_machine = vr1000_init,
> .init_irq = s3c24xx_init_irq,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2410_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c
> b/arch/arm/mach-s3c24xx/mach-vstms.c index f1d44ae..412d858 100644
> --- a/arch/arm/mach-s3c24xx/mach-vstms.c
> +++ b/arch/arm/mach-s3c24xx/mach-vstms.c
> @@ -47,7 +47,7 @@
> #include <plat/clock.h>
> #include <plat/devs.h>
> #include <plat/cpu.h>
> -
> +#include <plat/samsung-time.h>
>
> static struct map_desc vstms_iodesc[] __initdata = {
> };
> @@ -144,6 +144,7 @@ static void __init vstms_map_io(void)
> s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
> s3c24xx_init_clocks(12000000);
> s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
> + samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
> }
>
> static void __init vstms_init(void)
> @@ -161,6 +162,6 @@ MACHINE_START(VSTMS, "VSTMS")
> .init_irq = s3c24xx_init_irq,
> .init_machine = vstms_init,
> .map_io = vstms_map_io,
> - .timer = &s3c24xx_timer,
> + .timer = &samsung_timer,
> .restart = s3c2412_restart,
> MACHINE_END
> diff --git a/arch/arm/plat-samsung/include/plat/cpu.h
> b/arch/arm/plat-samsung/include/plat/cpu.h index ace4451..86fb5f3 100644
> --- a/arch/arm/plat-samsung/include/plat/cpu.h
> +++ b/arch/arm/plat-samsung/include/plat/cpu.h
> @@ -184,7 +184,7 @@ extern void s3c24xx_init_uartdevs(char *name,
> struct s3c24xx_uart_resources *res,
> struct s3c2410_uartcfg *cfg, int no);
>
> -/* timer for 2410/2440 */
> +/* timer for s5pc100 only */
>
> struct sys_timer;
> extern struct sys_timer s3c24xx_timer;
> diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h
> b/arch/arm/plat-samsung/include/plat/samsung-time.h index 9d6d622..13ae4b9
> 100644
> --- a/arch/arm/plat-samsung/include/plat/samsung-time.h
> +++ b/arch/arm/plat-samsung/include/plat/samsung-time.h
> @@ -30,7 +30,18 @@ struct samsung_timer_source {
> /* Be able to sleep for atleast 4 seconds (usually more) */
> #define SAMSUNG_TIMER_MIN_RANGE 4
>
> +#ifdef CONFIG_ARCH_S3C24XX
> +#define TCNT_MAX 0xffff
> +#define TSCALER_DIV 25
> +#define TDIV 50
> +#define TSIZE 16
> +#else
> #define TCNT_MAX 0xffffffff
> +#define TSCALER_DIV 2
> +#define TDIV 2
> +#define TSIZE 32
> +#endif
> +
> #define NON_PERIODIC 0
> #define PERIODIC 1
>
> diff --git a/arch/arm/plat-samsung/samsung-time.c
> b/arch/arm/plat-samsung/samsung-time.c index 91773bf..6d63fca 100644
> --- a/arch/arm/plat-samsung/samsung-time.c
> +++ b/arch/arm/plat-samsung/samsung-time.c
> @@ -2,7 +2,7 @@
> * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> * http://www.samsung.com/
> *
> - * SAMSUNG - Common hr-timer support
> + * samsung - Common hr-timer support (s3c and s5p)
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 as
> @@ -267,8 +267,8 @@ static void __init samsung_clockevent_init(void)
>
> tscaler = clk_get_parent(tdiv_event);
>
> - clk_set_rate(tscaler, pclk / 2);
> - clk_set_rate(tdiv_event, pclk / 2);
> + clk_set_rate(tscaler, pclk / TSCALER_DIV);
> + clk_set_rate(tdiv_event, pclk / TDIV);
> clk_set_parent(tin_event, tdiv_event);
>
> clock_rate = clk_get_rate(tin_event);
> @@ -336,7 +336,7 @@ static void __init samsung_clocksource_init(void)
>
> pclk = clk_get_rate(timerclk);
>
> - clk_set_rate(tdiv_source, pclk / 2);
> + clk_set_rate(tdiv_source, pclk / TDIV);
> clk_set_parent(tin_source, tdiv_source);
>
> clock_rate = clk_get_rate(tin_source);
> @@ -344,10 +344,10 @@ static void __init samsung_clocksource_init(void)
> samsung_time_setup(timer_source.source_id, TCNT_MAX);
> samsung_time_start(timer_source.source_id, PERIODIC);
>
> - setup_sched_clock(samsung_read_sched_clock, 32, clock_rate);
> + setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
>
> if (clocksource_mmio_init(samsung_timer_reg(),
> "samsung_clocksource_timer", - clock_rate, 250, 32,
> clocksource_mmio_readl_down))
> + clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
> panic("samsung_clocksource_timer: can't register clocksource\n");
> }
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
