Add device tree based discovery support for max8997. Cc: Karol Lewandowski <k.lewandowsk@xxxxxxxxxxx> Cc: Rajendra Nayak <rnayak@xxxxxx> Cc: Rob Herring <rob.herring@xxxxxxxxxxx> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx> Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx> Acked-by: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx> --- This is the sixth version of this patch. The link to v5 version of this patch is http://www.mail-archive.com/linux-samsung-soc@xxxxxxxxxxxxxxx/msg10368.html. The v5 of this patch was merged by Mark Brown and later reverted from his tree (http://lkml.indiana.edu/hypermail/linux/kernel/1204.2/00963.html) since there was conflict in the first patch of the series which was then later corrected by Chanwoo Choi <cw00.choi@xxxxxxxxxxx> (https://lkml.org/lkml/2012/7/5/256). This v6 patch is rebased to the latest max8997 driver code and there are no functional changes from v5. .../bindings/regulator/max8997-regulator.txt | 146 +++++++++++++++++++ drivers/mfd/max8997.c | 73 ++++++++++- drivers/regulator/max8997.c | 148 +++++++++++++++++++- include/linux/mfd/max8997-private.h | 1 + include/linux/mfd/max8997.h | 1 + 5 files changed, 366 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/max8997-regulator.txt diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt new file mode 100644 index 0000000..d3fbc36 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt @@ -0,0 +1,146 @@ +* Maxim MAX8997 Voltage and Current Regulator + +The Maxim MAX8997 is a multi-function device which includes volatage and +current regulators, rtc, charger controller and other sub-blocks. It is +interfaced to the host controller using a i2c interface. Each sub-block is +addressed by the host system using different i2c slave address. This document +describes the bindings for 'pmic' sub-block of max8997. + +Required properties: +- compatible: Should be "maxim,max8997-pmic". +- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. + +- max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck1 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +- max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck2 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +- max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck5 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +[1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional + property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage' + property should specify atleast one voltage level (which would be a + safe operating voltage). + + If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional + property is specified, then all the eigth voltage values for the + 'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified. + +Optional properties: +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from max8997 are delivered to. +- interrupts: Interrupt specifiers for two interrupt sources. + - First interrupt specifier is for 'irq1' interrupt. + - Second interrupt specifier is for 'alert' interrupt. +- max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs. +- max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. +- max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs. + +Additional properties required if either of the optional properties are used: +- max8997,pmic-ignore-gpiodvs-side-effect: When GPIO-DVS mode is used for + multiple bucks, changing the voltage value of one of the bucks may affect + that of another buck, which is the side effect of the change (set_voltage). + Use this property to ignore such side effects and change the voltage. + +- max8997,pmic-buck125-default-dvs-idx: Default voltage setting selected from + the possible 8 options selectable by the dvs gpios. The value of this + property should be between 0 and 7. If not specified or if out of range, the + default value of this property is set to 0. + +- max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used + for dvs. The format of the gpio specifier depends in the gpio controller. + +Regulators: The regulators of max8997 that have to be instantiated should be +included in a sub-node named 'regulators'. Regulator nodes included in this +sub-node should be of the format as listed below. + + regulator_name { + standard regulator bindings here + }; + +The following are the names of the regulators that the max8997 pmic block +supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of max8997. + + - LDOn + - valid values for n are 1 to 18 and 21 + - Example: LDO0, LD01, LDO2, LDO21 + - BUCKn + - valid values for n are 1 to 7. + - Example: BUCK1, BUCK2, BUCK3, BUCK7 + + - ENVICHG: Battery Charging Current Monitor Output. This is a fixed + voltage type regulator + + - ESAFEOUT1: (ldo19) + - ESAFEOUT2: (ld020) + + - CHARGER_CV: main battery charger voltage control + - CHARGER: main battery charger current control + - CHARGER_TOPOFF: end of charge current threshold level + +The bindings inside the regulator nodes use the standard regulator bindings +which are documented elsewhere. + +Example: + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + interrupt-parent = <&wakeup_eint>; + reg = <0x66>; + interrupts = <4 0>, <3 0>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */ + <&gpx0 1 1 0 0>, /* SET2 */ + <&gpx0 2 1 0 0>; /* SET3 */ + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_ARM_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c index f123517..abd5c80 100644 --- a/drivers/mfd/max8997.c +++ b/drivers/mfd/max8997.c @@ -21,8 +21,10 @@ * This driver is based on max8998.c */ +#include <linux/err.h> #include <linux/slab.h> #include <linux/i2c.h> +#include <linux/of_irq.h> #include <linux/interrupt.h> #include <linux/pm_runtime.h> #include <linux/module.h> @@ -47,6 +49,13 @@ static struct mfd_cell max8997_devs[] = { { .name = "max8997-led", .id = 2 }, }; +#ifdef CONFIG_OF +static struct of_device_id __devinitdata max8997_pmic_dt_match[] = { + { .compatible = "maxim,max8997-pmic", .data = TYPE_MAX8997 }, + {}, +}; +#endif + int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest) { struct max8997_dev *max8997 = i2c_get_clientdata(i2c); @@ -123,6 +132,58 @@ int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask) } EXPORT_SYMBOL_GPL(max8997_update_reg); +#ifdef CONFIG_OF +/* + * Only the common platform data elements for max8997 are parsed here from the + * device tree. Other sub-modules of max8997 such as pmic, rtc and others have + * to parse their own platform data elements from device tree. + * + * The max8997 platform data structure is instantiated here and the drivers for + * the sub-modules need not instantiate another instance while parsing their + * platform data. + */ +static struct max8997_platform_data *max8997_i2c_parse_dt_pdata( + struct device *dev) +{ + struct max8997_platform_data *pd; + + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); + if (!pd) { + dev_err(dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + pd->ono = irq_of_parse_and_map(dev->of_node, 1); + + /* + * ToDo: the 'wakeup' member in the platform data is more of a linux + * specfic information. Hence, there is no binding for that yet and + * not parsed here. + */ + + return pd; +} +#else +static struct max8997_platform_data *max8997_i2c_parse_dt_pdata( + struct device *dev) +{ + return 0; +} +#endif + +static inline int max8997_i2c_get_driver_data(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ +#ifdef CONFIG_OF + if (i2c->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(max8997_pmic_dt_match, i2c->dev.of_node); + return (int)match->data; + } +#endif + return (int)id->driver_data; +} + static int max8997_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -137,12 +198,21 @@ static int max8997_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, max8997); max8997->dev = &i2c->dev; max8997->i2c = i2c; - max8997->type = id->driver_data; + max8997->type = max8997_i2c_get_driver_data(i2c, id); max8997->irq = i2c->irq; + if (max8997->dev->of_node) { + pdata = max8997_i2c_parse_dt_pdata(max8997->dev); + if (IS_ERR(pdata)) { + ret = PTR_ERR(pdata); + goto err; + } + } + if (!pdata) goto err; + max8997->pdata = pdata; max8997->ono = pdata->ono; mutex_init(&max8997->iolock); @@ -434,6 +504,7 @@ static struct i2c_driver max8997_i2c_driver = { .name = "max8997", .owner = THIS_MODULE, .pm = &max8997_pm, + .of_match_table = of_match_ptr(max8997_pmic_dt_match), }, .probe = max8997_i2c_probe, .remove = max8997_i2c_remove, diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index 231fcdb..df0eafb 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -24,6 +24,7 @@ #include <linux/bug.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/of_gpio.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -31,6 +32,7 @@ #include <linux/regulator/machine.h> #include <linux/mfd/max8997.h> #include <linux/mfd/max8997-private.h> +#include <linux/regulator/of_regulator.h> struct max8997_data { struct device *dev; @@ -933,10 +935,145 @@ static struct regulator_desc regulators[] = { max8997_charger_fixedstate_ops), }; +#ifdef CONFIG_OF +static int max8997_pmic_dt_parse_dvs_gpio(struct max8997_dev *iodev, + struct max8997_platform_data *pdata, + struct device_node *pmic_np) +{ + int i, gpio; + + for (i = 0; i < 3; i++) { + gpio = of_get_named_gpio(pmic_np, + "max8997,pmic-buck125-dvs-gpios", i); + if (!gpio_is_valid(gpio)) { + dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio); + return -EINVAL; + } + pdata->buck125_gpios[i] = gpio; + } + return 0; +} + +static int max8997_pmic_dt_parse_pdata(struct max8997_dev *iodev, + struct max8997_platform_data *pdata) +{ + struct device_node *pmic_np, *regulators_np, *reg_np; + struct max8997_regulator_data *rdata; + unsigned int i, dvs_voltage_nr = 1, ret; + + pmic_np = iodev->dev->of_node; + if (!pmic_np) { + dev_err(iodev->dev, "could not find pmic sub-node\n"); + return -ENODEV; + } + + regulators_np = of_find_node_by_name(pmic_np, "regulators"); + if (!regulators_np) { + dev_err(iodev->dev, "could not find regulators sub-node\n"); + return -EINVAL; + } + + /* count the number of regulators to be supported in pmic */ + pdata->num_regulators = 0; + for_each_child_of_node(regulators_np, reg_np) + pdata->num_regulators++; + + rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) * + pdata->num_regulators, GFP_KERNEL); + if (!rdata) { + dev_err(iodev->dev, "could not allocate memory for " + "regulator data\n"); + return -ENOMEM; + } + + pdata->regulators = rdata; + for_each_child_of_node(regulators_np, reg_np) { + for (i = 0; i < ARRAY_SIZE(regulators); i++) + if (!of_node_cmp(reg_np->name, regulators[i].name)) + break; + + if (i == ARRAY_SIZE(regulators)) { + dev_warn(iodev->dev, "don't know how to configure " + "regulator %s\n", reg_np->name); + continue; + } + + rdata->id = i; + rdata->initdata = of_get_regulator_init_data( + iodev->dev, reg_np); + rdata->reg_node = reg_np; + rdata++; + } + + if (of_get_property(pmic_np, "max8997,pmic-buck1-uses-gpio-dvs", NULL)) + pdata->buck1_gpiodvs = true; + + if (of_get_property(pmic_np, "max8997,pmic-buck2-uses-gpio-dvs", NULL)) + pdata->buck2_gpiodvs = true; + + if (of_get_property(pmic_np, "max8997,pmic-buck5-uses-gpio-dvs", NULL)) + pdata->buck5_gpiodvs = true; + + if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs || + pdata->buck5_gpiodvs) { + ret = max8997_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np); + if (ret) + return -EINVAL; + + if (of_property_read_u32(pmic_np, + "max8997,pmic-buck125-default-dvs-idx", + &pdata->buck125_default_idx)) { + pdata->buck125_default_idx = 0; + } else { + if (pdata->buck125_default_idx >= 8) { + pdata->buck125_default_idx = 0; + dev_info(iodev->dev, "invalid value for " + "default dvs index, using 0 instead\n"); + } + } + + if (of_get_property(pmic_np, + "max8997,pmic-ignore-gpiodvs-side-effect", NULL)) + pdata->ignore_gpiodvs_side_effect = true; + + dvs_voltage_nr = 8; + } + + if (of_property_read_u32_array(pmic_np, + "max8997,pmic-buck1-dvs-voltage", + pdata->buck1_voltage, dvs_voltage_nr)) { + dev_err(iodev->dev, "buck1 voltages not specified\n"); + return -EINVAL; + } + + if (of_property_read_u32_array(pmic_np, + "max8997,pmic-buck2-dvs-voltage", + pdata->buck2_voltage, dvs_voltage_nr)) { + dev_err(iodev->dev, "buck2 voltages not specified\n"); + return -EINVAL; + } + + if (of_property_read_u32_array(pmic_np, + "max8997,pmic-buck5-dvs-voltage", + pdata->buck5_voltage, dvs_voltage_nr)) { + dev_err(iodev->dev, "buck5 voltages not specified\n"); + return -EINVAL; + } + + return 0; +} +#else +static int max8997_pmic_dt_parse_pdata(struct max8997_dev *iodev, + struct max8997_platform_data *pdata) +{ + return 0; +} +#endif /* CONFIG_OF */ + static int max8997_pmic_probe(struct platform_device *pdev) { struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev); + struct max8997_platform_data *pdata = iodev->pdata; struct regulator_config config = { }; struct regulator_dev **rdev; struct max8997_data *max8997; @@ -944,11 +1081,17 @@ static int max8997_pmic_probe(struct platform_device *pdev) int i, ret, size, nr_dvs; u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0; - if (!pdata) { + if (IS_ERR_OR_NULL(pdata)) { dev_err(pdev->dev.parent, "No platform init data supplied.\n"); return -ENODEV; } + if (iodev->dev->of_node) { + ret = max8997_pmic_dt_parse_pdata(iodev, pdata); + if (ret) + return ret; + } + max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data), GFP_KERNEL); if (!max8997) @@ -1104,6 +1247,7 @@ static int max8997_pmic_probe(struct platform_device *pdev) config.dev = max8997->dev; config.init_data = pdata->regulators[i].initdata; config.driver_data = max8997; + config.of_node = pdata->regulators[i].reg_node; rdev[i] = regulator_register(®ulators[id], &config); if (IS_ERR(rdev[i])) { diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h index 830152c..6ae21bf 100644 --- a/include/linux/mfd/max8997-private.h +++ b/include/linux/mfd/max8997-private.h @@ -316,6 +316,7 @@ enum max8997_irq { #define MAX8997_NUM_GPIO 12 struct max8997_dev { struct device *dev; + struct max8997_platform_data *pdata; struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */ struct i2c_client *rtc; /* slave addr 0x0c */ struct i2c_client *haptic; /* slave addr 0x90 */ diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index 328d8e2..1d4a4fe 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -75,6 +75,7 @@ enum max8998_regulators { struct max8997_regulator_data { int id; struct regulator_init_data *initdata; + struct device_node *reg_node; }; enum max8997_muic_usb_type { -- 1.6.6.rc2 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |