Certain tty line discipline implementations such slip and bluetooth hci invoke
the serial core uart_write() api in their write_wakeup callback. This leads to
a soft lockup with samsung serial driver since the uart port lock is taken in
the driver's interrupt handler and uart_write() attempts to take the same lock
again.
Fix this issue by releasing the uart port lock before the call to
uart_write_wakeup() in the tx handler. Also move the spin-lock/unlock sequence
from s3c64xx_serial_handle_irq() function into the tx and rx irq handlers so
that this change is applicable to s3c24xx platforms as well.
Reported-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Reported-by: Hyeonkook Kim <hk619.kim@xxxxxxxxxxx>
Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
---
drivers/tty/serial/samsung.c | 16 ++++++++++++----
1 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 7f04717..97bac4c 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -223,8 +223,11 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
struct uart_port *port = &ourport->port;
struct tty_struct *tty = port->state->port.tty;
unsigned int ufcon, ch, flag, ufstat, uerstat;
+ unsigned long flags;
int max_count = 64;
+ spin_lock_irqsave(&port->lock, flags);
+
while (max_count-- > 0) {
ufcon = rd_regl(port, S3C2410_UFCON);
ufstat = rd_regl(port, S3C2410_UFSTAT);
@@ -299,6 +302,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
tty_flip_buffer_push(tty);
out:
+ spin_unlock_irqrestore(&port->lock, flags);
return IRQ_HANDLED;
}
@@ -307,8 +311,11 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
struct s3c24xx_uart_port *ourport = id;
struct uart_port *port = &ourport->port;
struct circ_buf *xmit = &port->state->xmit;
+ unsigned long flags;
int count = 256;
+ spin_lock_irqsave(&port->lock, flags);
+
if (port->x_char) {
wr_regb(port, S3C2410_UTXH, port->x_char);
port->icount.tx++;
@@ -336,13 +343,17 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
port->icount.tx++;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
+ spin_unlock(&port->lock);
uart_write_wakeup(port);
+ spin_lock(&port->lock);
+ }
if (uart_circ_empty(xmit))
s3c24xx_serial_stop_tx(port);
out:
+ spin_unlock_irqrestore(&port->lock, flags);
return IRQ_HANDLED;
}
@@ -352,10 +363,8 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
struct s3c24xx_uart_port *ourport = id;
struct uart_port *port = &ourport->port;
unsigned int pend = rd_regl(port, S3C64XX_UINTP);
- unsigned long flags;
irqreturn_t ret = IRQ_HANDLED;
- spin_lock_irqsave(&port->lock, flags);
if (pend & S3C64XX_UINTM_RXD_MSK) {
ret = s3c24xx_serial_rx_chars(irq, id);
wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
@@ -364,7 +373,6 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
ret = s3c24xx_serial_tx_chars(irq, id);
wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
}
- spin_unlock_irqrestore(&port->lock, flags);
return ret;
}
--
1.6.6.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
