Hi Heiko, Sorry, i didn't check this patch with s3c2416. (i didn't have the s3c2416 board.) If you have a problem, i think good that revert this patch for fixing your problem. Also, i will check and share the result. Best Regards, Jaehoon Chung On 10/17/2012 06:15 PM, Heiko Stübner wrote: > Hi, > > Am Freitag, 14. September 2012, 11:08:51 schrieb Chander Kashyap: >> Perform clock disable/enable in runtime suspend/resume. >> >> Signed-off-by: Chander Kashyap <chander.kashyap@xxxxxxxxxx> > > It seems this patch breaks my S3C2416 based machine with 3.7-rc1. I'm not > yet sure why, but the only response I get is loop of: > > mmc0: Timeout waiting for hardware interrupt. > mmc0: Internal clock never stabilised. > mmc0: Timeout waiting for hardware interrupt. > mmc0: Internal clock never stabilised. > > > This only happens on the hsmmc channel using the gpio-based card detect and > even prevents the card from beeing fully detected. The other hsmmc channel > using a permanent emmc seems to be working fine. > > And of course, when I revert this patch everything works fine again. > > I'll investigate further, but it'd be also ok if someone has a fix for this > before me :-) . > > > Heiko > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |