On Wednesday, October 10, 2012 7:43 PM Vivek Gautam wrote
>
> Adding the transceiver to ohci driver. Keeping the platform data
> for continuing the smooth operation for boards which still uses it
>
> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
It looks good. I have tested this patch with Exynos5250.
Acked-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
Best regards,
Jingoo Han
> ---
> drivers/usb/host/ohci-exynos.c | 65 +++++++++++++++++++++++++++------------
> 1 files changed, 45 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
> index 20a5008..a1c4eb3 100644
> --- a/drivers/usb/host/ohci-exynos.c
> +++ b/drivers/usb/host/ohci-exynos.c
> @@ -15,14 +15,37 @@
> #include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/platform_data/usb-exynos.h>
> +#include <linux/usb/phy.h>
> #include <plat/usb-phy.h>
>
> struct exynos_ohci_hcd {
> struct device *dev;
> struct usb_hcd *hcd;
> struct clk *clk;
> + struct usb_phy *phy;
> + struct exynos4_ohci_platdata *pdata;
> };
>
> +static void exynos_ohci_phy_enable(struct exynos_ohci_hcd *exynos_ohci)
> +{
> + struct platform_device *pdev = to_platform_device(exynos_ohci->dev);
> +
> + if (exynos_ohci->phy)
> + usb_phy_init(exynos_ohci->phy);
> + else if (exynos_ohci->pdata->phy_init)
> + exynos_ohci->pdata->phy_init(pdev, S5P_USB_PHY_HOST);
> +}
> +
> +static void exynos_ohci_phy_disable(struct exynos_ohci_hcd *exynos_ohci)
> +{
> + struct platform_device *pdev = to_platform_device(exynos_ohci->dev);
> +
> + if (exynos_ohci->phy)
> + usb_phy_shutdown(exynos_ohci->phy);
> + else if (exynos_ohci->pdata->phy_exit)
> + exynos_ohci->pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
> +}
> +
> static int ohci_exynos_start(struct usb_hcd *hcd)
> {
> struct ohci_hcd *ohci = hcd_to_ohci(hcd);
> @@ -81,15 +104,10 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev)
> struct usb_hcd *hcd;
> struct ohci_hcd *ohci;
> struct resource *res;
> + struct usb_phy *phy;
> int irq;
> int err;
>
> - pdata = pdev->dev.platform_data;
> - if (!pdata) {
> - dev_err(&pdev->dev, "No platform data defined\n");
> - return -EINVAL;
> - }
> -
> /*
> * Right now device-tree probed devices don't get dma_mask set.
> * Since shared usb code relies on it, set it here for now.
> @@ -105,6 +123,20 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev)
> if (!exynos_ohci)
> return -ENOMEM;
>
> + pdata = pdev->dev.platform_data;
> + if (!pdata) {
> + /* Fallback to Phy transceiver */
> + phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
> + if (IS_ERR_OR_NULL(phy)) {
> + dev_err(&pdev->dev, "no platform data or transceiver defined\n");
> + return -EPROBE_DEFER;
> + } else {
> + exynos_ohci->phy = phy;
> + }
> + } else {
> + exynos_ohci->pdata = pdata;
> + }
> +
> exynos_ohci->dev = &pdev->dev;
>
> hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev,
> @@ -150,8 +182,7 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev)
> goto fail_io;
> }
>
> - if (pdata->phy_init)
> - pdata->phy_init(pdev, S5P_USB_PHY_HOST);
> + exynos_ohci_phy_enable(exynos_ohci);
>
> ohci = hcd_to_ohci(hcd);
> ohci_hcd_init(ohci);
> @@ -159,13 +190,15 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev)
> err = usb_add_hcd(hcd, irq, IRQF_SHARED);
> if (err) {
> dev_err(&pdev->dev, "Failed to add USB HCD\n");
> - goto fail_io;
> + goto fail_add_hcd;
> }
>
> platform_set_drvdata(pdev, exynos_ohci);
>
> return 0;
>
> +fail_add_hcd:
> + exynos_ohci_phy_disable(exynos_ohci);
> fail_io:
> clk_disable(exynos_ohci->clk);
> fail_clken:
> @@ -177,14 +210,12 @@ fail_clk:
>
> static int __devexit exynos_ohci_remove(struct platform_device *pdev)
> {
> - struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
> struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
> struct usb_hcd *hcd = exynos_ohci->hcd;
>
> usb_remove_hcd(hcd);
>
> - if (pdata && pdata->phy_exit)
> - pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
> + exynos_ohci_phy_disable(exynos_ohci);
>
> clk_disable(exynos_ohci->clk);
> clk_put(exynos_ohci->clk);
> @@ -209,8 +240,6 @@ static int exynos_ohci_suspend(struct device *dev)
> struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
> struct usb_hcd *hcd = exynos_ohci->hcd;
> struct ohci_hcd *ohci = hcd_to_ohci(hcd);
> - struct platform_device *pdev = to_platform_device(dev);
> - struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
> unsigned long flags;
> int rc = 0;
>
> @@ -229,8 +258,7 @@ static int exynos_ohci_suspend(struct device *dev)
>
> clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
>
> - if (pdata && pdata->phy_exit)
> - pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
> + exynos_ohci_phy_disable(exynos_ohci);
>
> clk_disable(exynos_ohci->clk);
>
> @@ -244,13 +272,10 @@ static int exynos_ohci_resume(struct device *dev)
> {
> struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
> struct usb_hcd *hcd = exynos_ohci->hcd;
> - struct platform_device *pdev = to_platform_device(dev);
> - struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
>
> clk_enable(exynos_ohci->clk);
>
> - if (pdata && pdata->phy_init)
> - pdata->phy_init(pdev, S5P_USB_PHY_HOST);
> + exynos_ohci_phy_enable(exynos_ohci);
>
> /* Mark hardware accessible again as we are out of D3 state by now */
> set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
> --
> 1.7.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
