Hi,
On Tuesday 09 of October 2012 17:18:50 Vasanth Ananthan wrote:
> This patch adds polling mode support for i2c s3c-2410 driver.
> The I2C_SATAPHY controller lacks an interrupt line but the s3c-2410
> driver is interrupt driven. Hence this support is required for
> functioning of the I2C_SATAPHY controller.
>
> Signed-off-by: Vasanth Ananthan <vasanth.a@xxxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-s3c2410.c | 84
> +++++++++++++++++++++++++++++--------- 1 files changed, 65
> insertions(+), 19 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c
> b/drivers/i2c/busses/i2c-s3c2410.c index 5ae3b02..699b530 100644
> --- a/drivers/i2c/busses/i2c-s3c2410.c
> +++ b/drivers/i2c/busses/i2c-s3c2410.c
> @@ -48,6 +48,7 @@
> #define QUIRK_S3C2440 (1 << 0)
> #define QUIRK_HDMIPHY (1 << 1)
> #define QUIRK_NO_GPIO (1 << 2)
> +#define QUIRK_SATAPHY (1 << 3)
>
> /* i2c controller state */
> enum s3c24xx_i2c_state {
> @@ -102,10 +103,14 @@ static struct platform_device_id
> s3c24xx_driver_ids[] = { };
> MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
>
> +static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long
> iicstat); +
> #ifdef CONFIG_OF
> static const struct of_device_id s3c24xx_i2c_match[] = {
> { .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
> { .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440
> }, + { .compatible = "samsung,s3c2440-sataphy-i2c",
> + .data = (void *)(QUIRK_S3C2440|QUIRK_SATAPHY|QUIRK_NO_GPIO) },
nitpick: Please insert spaces around bitwise OR operators.
> { .compatible = "samsung,s3c2440-hdmiphy-i2c",
> .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
> {},
> @@ -146,7 +151,8 @@ static inline void
> s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret) if (ret)
> i2c->msg_idx = ret;
>
> - wake_up(&i2c->wait);
> + if (!(i2c->quirks & QUIRK_SATAPHY))
> + wake_up(&i2c->wait);
> }
>
> static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
> @@ -184,6 +190,21 @@ static inline void s3c24xx_i2c_enable_irq(struct
> s3c24xx_i2c *i2c) }
>
>
> +static bool is_ack(struct s3c24xx_i2c *i2c)
> +{
> + u32 time_out = i2c->tx_setup;
nitpick: Separate local variable declaration from code with a blank line.
> + while (--time_out) {
> + if (readl(i2c->regs + S3C2410_IICCON)
> + & S3C2410_IICCON_IRQPEND) {
> + if (!(readl(i2c->regs + S3C2410_IICSTAT)
> + & S3C2410_IICSTAT_LASTBIT))
> + return true;
> + }
> + udelay(time_out);
> + }
nitpick: Here a blank line would be fine.
> + return false;
> +}
> +
> /* s3c24xx_i2c_message_start
> *
> * put the start of a message onto the bus
> @@ -227,6 +248,21 @@ static void s3c24xx_i2c_message_start(struct
> s3c24xx_i2c *i2c,
>
> stat |= S3C2410_IICSTAT_START;
> writel(stat, i2c->regs + S3C2410_IICSTAT);
> +
> + if (i2c->quirks & QUIRK_SATAPHY) {
> +
nitpick: Unnecessary blank line.
> + while ((i2c->msg_num != 0) && is_ack(i2c)) {
> +
Same here.
> + i2c_s3c_irq_nextbyte(i2c, stat);
> +
> + stat = readl(i2c->regs + S3C2410_IICSTAT);
> + if (stat & S3C2410_IICSTAT_ARBITR)
> + dev_err(i2c->dev, "deal with arbitration loss\n");
> +
Same here.
> + }
> +
Same here.
> + }
> +
Same here.
> }
>
Best regards,
Tomasz Figa
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
