Hi Tomasz,
On 3 October 2012 19:40, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
> Hi Chander, Thomas,
>
> I can see one more problem here.
>
> Based on the fact that sdhci-s3c driver receives only the endpoint gate
> clock (hsmmc), doesn't the following setup make the driver unable to change
> the frequency of this clock?
The driver never changes the clock frequency of the core system clocks
nor of the endpoint. There are internal dividers inside the sdhci
controller which are divide to acheive required clock speed.
Thanks,
Thomas.
>
> On Monday 01 of October 2012 17:39:21 chander.kashyap@xxxxxxxxxx wrote:
>> +static struct samsung_mux_clock exynos4_mux_clks[] = {
> [snip]
>> + MUXCLK("exynos4-sdhci.0", "mout_mmc0", group1_parents, 0,
>> + EXYNOS4_CLKSRC_FSYS, 0, 4, 0),
>> + MUXCLK("exynos4-sdhci.1", "mout_mmc1", group1_parents, 0,
>> + EXYNOS4_CLKSRC_FSYS, 4, 4, 0),
>> + MUXCLK("exynos4-sdhci.1", "mout_mmc2", group1_parents, 0,
>> + EXYNOS4_CLKSRC_FSYS, 8, 4, 0),
>> + MUXCLK("exynos4-sdhci.1", "mout_mmc3", group1_parents, 0,
>> + EXYNOS4_CLKSRC_FSYS, 12, 4, 0),
> [snip]
>> +};
>> +
>> +static struct samsung_div_clock exynos4_div_clks[] = {
> [snip]
>> + DIVCLK("exynos4-sdhci.0", "div_mmc0", "mout_mmc0", 0,
>> + EXYNOS4_CLKDIV_FSYS1, 0, 4, 0),
>> + DIVCLK("exynos4-sdhci.0", "div_mmc0_pre", "div_mmc0", 0,
>> + EXYNOS4_CLKDIV_FSYS1, 8, 8, 0),
>> + DIVCLK("exynos4-sdhci.1", "div_mmc1", "mout_mmc1", 0,
>> + EXYNOS4_CLKDIV_FSYS1, 16, 4, 0),
>> + DIVCLK("exynos4-sdhci.1", "div_mmc1_pre", "div_mmc1", 0,
>> + EXYNOS4_CLKDIV_FSYS1, 24, 8, 0),
>> + DIVCLK("exynos4-sdhci.2", "div_mmc2", "mout_mmc2", 0,
>> + EXYNOS4_CLKDIV_FSYS2, 0, 4, 0),
>> + DIVCLK("exynos4-sdhci.2", "div_mmc2_pre", "div_mmc2", 0,
>> + EXYNOS4_CLKDIV_FSYS2, 8, 8, 0),
>> + DIVCLK("exynos4-sdhci.3", "div_mmc3", "mout_mmc3", 0,
>> + EXYNOS4_CLKDIV_FSYS2, 16, 4, 0),
>> + DIVCLK("exynos4-sdhci.3", "div_mmc3_pre", "div_mmc3", 0,
>> + EXYNOS4_CLKDIV_FSYS2, 24, 8, 0),
> [snip]
>> +};
>> +
>> +struct samsung_gate_clock exynos4_gate_clks[] = {
> [snip]
>> + GATECLK("exynos4-sdhci.0", "hsmmc0", "aclk_133", 0,
>> + EXYNOS4_CLKGATE_IP_FSYS, 5, "hsmmc"),
>> + GATECLK("exynos4-sdhci.1", "hsmmc1", "aclk_133", 0,
>> + EXYNOS4_CLKGATE_IP_FSYS, 6, "hsmmc"),
>> + GATECLK("exynos4-sdhci.2", "hsmmc2", "aclk_133", 0,
>> + EXYNOS4_CLKGATE_IP_FSYS, 7, "hsmmc"),
>> + GATECLK("exynos4-sdhci.3", "hsmmc3", "aclk_133", 0,
>> + EXYNOS4_CLKGATE_IP_FSYS, 8, "hsmmc"),
> [snip]
>> +};
>
> Best regards,
> --
> Tomasz Figa
> Samsung Poland R&D Center
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
